Search

======= MB-6582 Parts List ======= **Please read the entire construction guide before buying parts or ... parts. Therefore, you should read the [[wilba_mb_6582_base_pcb_construction_guide|MB-6582 Base PCB Cons... or (Radial)|2200µF, 25V|Optional: See Note 1|{{mb-6582:2200uf.jpg?50x50}}| |C2|Monolithic Capacitor|330nF|Optional: See Note 1|{{mb-6582:330nf.jpg?50x50}}| |C3|Electrolytic Capacitor (Radial)|2200µF, 25V|

~~NOTOC~~ ======= MB-6582 - MIDIbox SID Synthesizer V2 ======= {{http://farm4.static.flickr.com... flickr.com/3129/2545754070_261733d86c.jpg}} **MB-6582 is a MIDIbox SID synthesizer.** If you have no i... ucapps.de/midibox_sid.html]] **More photos of MB-6582 during construction** [[http://www.flickr.com/ph... .org/forum/index.php?topic=10302.0]]. [[wilba_mb_6582_pcbthread|The condensed version of this thread]].

---- ====== MB-6582 (Prototype) ====== ==== ==== //These are the wiki pages I wrote about the MB-6582, my MIDIbox SID Synthesizer V2 project. Since there were a lot of people who want the PCBs, and ev... ders of the panels and parts. Thus my original MB-6582 can be considered the prototype, as some changes ... up one day, but my time is better spent on the MB-6582 documentation // ==== Introduction ==== MB-658

======= MB-6582 Base PCB Construction Guide ======= **Please read the entire construction guide before... that I followed while constructing my original MB-6582 and how I suggest people construct their MB-6582. I assume people constructing an MB-6582 base PCB have a basic level of electronics knowledge and so... ion only allows use of SIDs that need 9v (8580 or 6582), the 6581 needs 12v. One 9v voltage regulator is

**The [[wilba_mb_6582|MB-6582]] PCBs are copyright 2006-2007 Jason Williams and Thorsten Klose. Licensed... ompleted MIDIbox SID synths containing [[wilba_mb_6582|MB-6582]] PCBs, on eBay or anywhere else without ... , the MIDIbox SID V2 firmware, and the [[wilba_mb_6582|MB-6582]] PCBs are not allowed to be sold for pro... t of time and effort in developing the [[wilba_mb_6582|MB-6582]] PCBs and making them available for peop

ard" so everything else will match as well. {{mb-6582:mech_yyh_mm.gif}} * Note about PLED displays: My prototype MB-6582 used a PLED display. PLED displays look absolutely awesome, but some models hav... CB area underneath). This is how the prototype MB-6582 was constructed. If people really want to use a P... or) as the brightness will be different. See {{mb-6582:mb-6582_cs_dout_wiring.pdf}} for LED wiring on th

My original MB-6582 and the newer ones have panels made by Front Panel Express (aka. Schaeffer in German... individual text labels if you want: http://www.mb6582.org/plans/MB-6582_frontpanel_r2.fpd This one has... thickness of each type of artwork. http://www.mb6582.org/plans/MB-6582_frontpanel_r2_opt.fpd This one... thickness of each type of artwork. http://www.mb6582.org/plans/MB-6582_frontpanel_r2_opt2.fpd **This

~~NOTOC~~ ====== MB-6582 Power Switch Bulk Order ====== I have about 60 (?) spare DPDT rocker switches... are identical to C64 power switch and fit the MB-6582 PCB. {{http://farm3.static.flickr.com/2122/21046... the PayPal email address you have used for the MB-6582 PCB order. Please make sure your PayPal account h... HIS OFFER IS ONLY TO PEOPLE WHO ARE NOT BUYING MB-6582 PARTS KITS FROM SMASHTV** **THIS OFFER IS ONLY T

t MB-SID box, an old brown C64 case filled with 4x6582s, the "optimized C64 PSU" circuit, eight BankStic... ot more filterless 6581s, got some good 8580s and 6582s, got my 4xSID box going, and then got inspired t... thesizer V2 === I call this project **[[wilba_mb_6582|MB-6582]]** because it has 8x6582 SIDs. For more information, go to my **[[wilba_mb_6582|MB-6582]]** page. === MIDIbox SEQ V3/V4 Control Surface PCB

der|OPL3 (MB-FM) Chipset Bulk Order]] [[wilba_mb_6582_power_switch_bulk_order|MB-6582 Power Switch Bulk Order]] [[wilba_mb_6582_parts_bulk_order|MB-6582 Parts Bulk Order]] [[wilba_mb_seq_pcb_bulk_order

t raves. I discovered MIDIbox through Wilba's MB-6582 which was posted on Hackaday and was thoroughly i... on building a few more boxes after I finish my MB-6582 but am making a start while I'm waiting for the p... s that I've started getting bits for.=== **[[MB-6582]]** - Built on Wilba's designs. **[[x0xb0x]]** -... f the "Waldorf" knobs from Albs as used on the MB-6582. I am going to organise a 3rd order when we hav

is page is a summary of the (atm) 20 pages long mb6582 PCB and kit thread located [[http://www.midibox.o... info ===== * Please refer to The definitive MB-6582 PCB/kit threat located at [[http://www.midibox.or... u might be interested in, like bulk orders for MB-6582 parts. ===== I have a question/comment/suggestio... e: * [[http://www.midibox.org/dokuwiki/wilba_mb_6582_control_surface_parts_list|CS parts list]] * [[

====== MB-6582 PT-10 Case / Milling Bulk Order ====== The enclosure used in Wilba's MB-6582 prototype: {{http://www.midibox.org/dokuwiki/_media/mb-6582:pt-10.jpg}} Is now set for a bulk order for Nort

====== MB-6582 PT-10 Case / Milling Bulk Order ====== ===== **Note: This Bulk Order has b... nded !** ===== The enclosure used in Wilba's MB-6582 prototype: {{http://www.midibox.org/dokuwiki/_media/mb-6582:pt-10.jpg}} Is now set for a bulk order for North and Central America. The enclosure is