====== EuroRack - AOUT-NG - IO-Port and Frontpanel ======
{{:phatline:Euro_AOUT_NG_CON_3D_assambled.jpg?600|}}\\
{{:phatline:Euro_AOUT_NG_CON_3D_Draft.jpg?600|}}\\
{{:phatline:Euro_AOUT_NG_CON_3D_Panel.jpg?900|}}\\

**PCB Size is 100x40mm**\\
{{:phatline:Euro_AOUT_NG_CON_3D_FRONT.jpg?900|}}\\
{{:phatline:Euro_AOUT_NG_CON_3D_TOP.jpg?900|}}\\
{{:phatline:Euro_AOUT_NG_CON_3D_BACK.jpg?900|}}\\

{{:phatline:Euro_AOUT_NG_CON_Shematic.jpg?900|}}\\
\\
{{:phatline:Euro_AOUT_NG_CON_Board-B.jpg?900|}}\\
\\
====== Hardware Requirements ======
  * Soldering Iron - with a Dip that can Handle Thruhole-Parts solder Paste...\\
  * The other Parts from the BOM\\
  * a Midibox Core32 + Aout-NG

====== Building and BOM======
All necessery Information is printet on the PCB, but also check the Shematic...\\ 
**Mouser:**\\
^Ref^Q^mouser^Type^Footprint^Description^
|J5|1|517-30316-6002|2x8 Pin Header|2x8 Pin Header 2.54 * 2.54 Pitch|to connect to Aout-NG J5|
|J5|2|710-61201623021|2x8 Pin Header|2x8 Pin Header 2.54 * 2.54 Pitch|to connect to Aout-NG J5|
|U3|1|771-74HC14D-T|74HC14|SOIC-14|SOLDER SKILLs|
|Cable|1|617-09180407001|Flat||a quantity forEver - you may have that already|
\\

4x [[https://www.buerklin.com/de/Montageblock/p/17H917|Leiterplatten Montageblock aka Standoffs]] 100x summed 30€\\
You will also need M3 Screws - 4 off them...\\
Also here it is clever to order 100 pieces for a cheaper price - you will need this on all my projects...\\

if you order the PCB via my Gerbers you get 4 PCB on 1 100x100mm PCB... on JLCPCB you get min 5 of thes PCBs...
so you may order the needet Parts 20x times

====== Frontpanel======
**Recommend Material**\\
2mm x 128.5 x 17.78 Aluminium, anodised\\

**A cheaper way is: order a 1,6mm thick Aluminium PCB as Frontpanel:**\\
I will test this... later the gerbers:\\
{{:phatline:Euro_AOUT_NG_CON_FP-Measurement.jpg?900|}}\\



====== To Do ======
waiting for the PCBs and Panels...\\

====== Community users working on it ======
  * **[[Phatline]]** =  PCB & Shematic, Documentation...\\

Just let a Private message on the forum to user already involved.\\