Search
You can find the results of your search below.
Results
- mbhp_genesis: 53 Hits
- DIbox core modules). In addition, the circuit and board are designed so that up to four MBHP_Genesis modu... SMT oscillator)
* Smallest footprint (cheapest board) possible
* Many components may be left unstuff... oxshop.bigcartel.com/product/midibox-quad-genesis-board|MIDIbox Shop!]]**
Disadvantages:
* Very dense layout
* Larger board than it would be if all the glue logic was remove
- mb_matrix: 39 Hits
- lements a 56-port MIDI matrix/router using a core board and an FPGA-based add-on board together with a set of break-out boards and modules that allow for physic... possible.
Two BOBs each connect to a single I/O board, which does all the level shifting and signal ref... g and routing logic that is controlled via a core board such as the STM32 or the LPC17.
As the system is
- pedal_box: 28 Hits
- ons of your existing floorboard as well.
**Pedal Board**
<box 253px right round>
{{mcrozier:pedal_board_max.jpg?220x*}}\\
Expanding into Pedal Board - you can build a complete MIOS Powered Floorboard.</box>
... ntrolled over 7 midi channels.
Pedal Box / Pedal Board features an extensive display system; \\
Program
- mb-sidr8tr:start: 24 Hits
- d to populate the control surface. Since a single-board solution would be quite expensive (starting with ... ds themselves. This allows one to use the MB-6582 board if desired (via the J8/J9 headers just like a nor... ?320}}
{{:mb-sidr8tr:8x8-led_matrix-daughter-rev1-board.png?320}}
{{:mb-sidr8tr:led-matrix-rev7.zip|Eagl... nized is you are interested in obtaining your own board at a better price than doing a single board one-o
- howto_create_a_pcb_english_german: 21 Hits
- is then exposed to light.
Afterwards, when the board is placed in the developing solution, the areas h... tive washes away, exposing the bare copper on the board. Lastly, the board is placed in an etchant solution, which eats away at the exposed copper, leaving behi... hotosensitive chemical.
Voila! A printed circuit board!
Of course, I have to say that this process invo
- home:skills:etching_pcbs: 21 Hits
- is then exposed to light.
Afterwards, when the board is placed in the developing solution, the areas h... tive washes away, exposing the bare copper on the board. Lastly, the board is placed in an etchant solution, which eats away at the exposed copper, leaving behi... hotosensitive chemical.
Voila! A printed circuit board!
Of course, I have to say that this process invo
- pga:buildregbrd: 18 Hits
- Building the regulator board:\\
Parts needed:\\
line cord, fuse and switch.\\
1 center tapped transformer... to your mixer.
Half the supply is off the circuit board, as it just won't fit.
We will start with the tra... of the bridge and the + terminal of the regulator board. We connect the – lead of the other capacitor to ... of the bridge and the – terminal of the regulator board. Finally, we connect the two loose capacitor lead
- mb-lre8x2cs_pcb_bulk_order: 17 Hits
- ng insurance you want to take.
The price of each board is 9€ (I had to buy extra shipping material) and ... iki page of the bulk order of the control surface board featuring combo DINx4 and improved DOUTx4 modules... er, HASL, 100% E-tested & ROHS compliant.\\
The board is 3,368 x 13,472 inch (342,2mm x 85,5mm): just l... ==Dimensions====
|{{http://jeromebo.free.fr/Wiki/Board.jpg?800 |Board}}|
You can download a better defi
- mb-lre8x2cs_pcb: 16 Hits
-
Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules... er, HASL, 100% E-tested & ROHS compliant.\\
The board is 3,368 x 13,472 inch (342,2mm x 85,5mm): just l... ==Dimensions====
|{{http://jeromebo.free.fr/Wiki/Board.jpg?800 |Board}}|
You can download a better definition version [[http://jeromebo.free.fr/Wiki/Board.pdf
- korg_wavedrum_midification: 16 Hits
- urate as possible.
===Interfacing the LPCXpresso board===
The LPC1769 microprocessor on the LPCXpresso board has an on-chip 12 bit A/D converter. Sampling both... fer amplifiers located on the Wavedrum's KLM-2937 board:
{{:wavedrum_midi:buffer_amp.jpg?200|Getting the... e too weak to be fed directly into the LPCXpresso board's ADC inputs, they need some gain.\\
The output s
- modules_and_parts: 16 Hits
- ====
====Core Boards====
* **[[STM32F4 Core board parts list|Core32_STM32F4]]** - //**Current Core Module**//
* [[LPC17 Core board parts list|Core32_LPC17]] - //:!: Obsolete //
* **[[Core board parts list|Core8]]** - //:!: Outdated - Original ... Core //
====Digital Inputs/Outputs====
* [[DIN board parts list|DIN]]
* [[DOUT board parts list|DOUT
- midibox_audiomatrix: 12 Hits
- u include the cost of the 32 opamps and the extra board space etc, how does it compare to the AD chip (wh... l pretty hefty.... Considering there is almost no board space for the actual MT chips, 8 quad buffers wouldn't be too out of line in terms of board size?
//I'm no guru by any stretch.... But I not... ches.
I think the idea of using a seperate buffer board is a good call, that way if some crazy audiophile
- mb-lre8x2cs_rev4.6: 12 Hits
-
Welcome to the wiki page of the control surface board featuring:
* DINx4 module,
* Improved DOUTx4 ... ?id=mb-lre8x2cs_rev4.6#bom |BOM below]]).\\
The board is 3,335 x 13,452 inch (341,7 x 85,1 mm): slightl... The origin (0;0) is the bottom left corner of the board.
**//Note: Be very careful if you use vectorial ... endless, the use of them is not impacted.
==3mm board holes==
Coordinates of the six holes (in inch):
- mb-twinsid: 11 Hits
- ======TWINsid V1.2 features :=======
**The main board pcb integrated :**
*1 x psu parts (12v or 9v j... thru and second midi out
*2 x sid module
**SR board :**
*The SR board integrated the din and dout module
**CTRL board :**
*The CTRL board have 13 pots and 16 switchs for a
- pga:buildchanbrd: 11 Hits
- pga:stackboards: 11 Hits
- scale-explorer: 10 Hits
- 16x4blm_pcb: 10 Hits
- tpd_pcb: 10 Hits
- pga:midichart: 10 Hits
- stm32f4_module: 9 Hits
- mbqg_fp: 9 Hits
- mbhp_genesis_ls: 9 Hits
- home:project:midi_mapper: 9 Hits
- macos_mios32_toolchain_core: 9 Hits
- pga:buildoutbrd: 9 Hits
- apparat_20_construction_blog: 9 Hits
- phatline: 9 Hits
- wcore: 9 Hits
- pedal_box:manual: 8 Hits
- mb-sidr8tr:mb-mtrx_bulk: 8 Hits
- pga:patches: 8 Hits
- mb_olre16: 8 Hits
- m00dawg: 7 Hits
- martinsomerville: 7 Hits
- midibox_speakjet_k64_modul: 7 Hits
- midibox_pokey: 7 Hits
- midibox_ay_ym_v2: 7 Hits
- midibox_snes_apu: 7 Hits
- seq_v4l_mk._ii: 7 Hits
- midibox_vgmplayer: 7 Hits
- wcoref4_pcb: 7 Hits
- mnmlcore: 7 Hits
- seqv4plus_le_mec: 7 Hits
- dipcoref4: 7 Hits
- mb_visual_metronome: 6 Hits
- mbhp4066: 6 Hits
- fnp-sid: 6 Hits
- ain_4: 6 Hits
- stuartm_stukontrol: 6 Hits
- speakjet_breadboard_construction: 6 Hits
- layout_improvements: 5 Hits
- home:skills:soldering: 5 Hits
- gm5_expansion_5x5_board: 5 Hits
- midiboxmixer: 5 Hits
- midiboxmixerhardware: 5 Hits
- pad_4_4: 5 Hits
- pga:inputchoices: 5 Hits
- questionable: 5 Hits
- fadercore_-_fadermodule_for_audio_daw: 5 Hits
- soldering: 5 Hits
- tm5-gate-board: 5 Hits
- wilba_mb_6582_psuopte: 5 Hits
- wilba_mb_seq_pcb_bulk_order: 5 Hits
- introduction_to_ucapps.de: 4 Hits
- pga:choices: 4 Hits
- encyclopedia_entries: 4 Hits
- mb_clock: 4 Hits
- midibox_ay_3_8912_board: 4 Hits
- displaydriver-smd: 4 Hits
- seqv4plus_enc-plate: 4 Hits
- midibox_ay_3_8912: 4 Hits
- wickedblade: 4 Hits
- mb-lre8x2cs_bulk_order_2014: 4 Hits
- windows_mios32_toolchain_core: 4 Hits
- wcore_res-sd: 4 Hits
- pga:smtsoldering: 3 Hits
- pga:postconfigsoftware: 3 Hits
- home:mbhp:module:din: 3 Hits
- scs_pcb: 3 Hits
- mbhp: 3 Hits
- pga:configmixer: 3 Hits
- flo: 3 Hits
- home:mbhp:module:aout_ng: 3 Hits
- dipboardf4_modules: 3 Hits
- m16: 3 Hits
- mcan: 3 Hits
- triggermatrix5: 3 Hits
- core4disc: 3 Hits
- aout_ng: 3 Hits
- user_projects: 3 Hits
- openpad: 3 Hits
- mididocs:seq:blm16x16_build_guide: 3 Hits
- fantomxr: 3 Hits
- mb909: 3 Hits
- open_source_projects: 3 Hits
- daughter_board: 3 Hits
- durisian: 3 Hits
- gm5x5x5_pcb_bulk_order: 2 Hits
- findbuddha: 2 Hits
- home:skills:references: 2 Hits
- mbseqdocs: 2 Hits
- linux_mios32_toolchain_core: 2 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 2 Hits
- envelope-follower-bissel-based: 2 Hits
- trace: 2 Hits
- acsensorizer_04: 2 Hits
- make_encoders_out_of_your_mouse: 2 Hits
- midibox_sid_faq: 2 Hits
- doutx2dinx1: 2 Hits
- sync_4_newbies: 2 Hits
- gm5x5x5_noob_guide: 2 Hits
- fadercore_-_vlr-8x16ledmeter: 2 Hits
- midibox_ay_keyboard: 2 Hits
- pic_burner: 2 Hits
- pcb: 2 Hits
- fadercore_-_vlr-8enc: 2 Hits
- euro-midi-io: 2 Hits
- pga:softwareoverview: 2 Hits
- dseq32: 2 Hits
- mb_rgb-led_matrix_8x8: 2 Hits
- control_surface_troubleshooting: 2 Hits
- fadercore_-_vlr-3x8but: 2 Hits
- home:project:midimon: 2 Hits
- speakjet_dev_archive: 2 Hits
- midibox_lc_german: 2 Hits
- midibox_quad_genesis: 2 Hits
- midibox_speakjet: 2 Hits
- tos_-_a_tds_controller_blog: 2 Hits
- wcore_usb: 2 Hits
- midio128: 2 Hits
- northernlightx: 2 Hits
- stm32f4_core_board_parts_list: 2 Hits
- ain_board_parts_list: 2 Hits
- wild_weasel: 2 Hits
- frequently_asked_questions_faq: 2 Hits
- dipboardf4: 2 Hits
- mb_2069: 2 Hits
- ainser8_module: 2 Hits
- ssm2164_getting_started: 2 Hits
- mididocs:seq:building: 1 Hits
- etching_pcb: 1 Hits
- tm5-dindoutgate: 1 Hits
- home:mbhp:module:core: 1 Hits
- wikify:mbhp: 1 Hits
- ainser64_module: 1 Hits
- core_module: 1 Hits
- easy_cv: 1 Hits
- home: 1 Hits
- pga:purpose: 1 Hits
- aout_module: 1 Hits
- aout_lc_module: 1 Hits
- opl3_module_modified: 1 Hits
- mbhp_acronyms: 1 Hits
- mf_ng_module: 1 Hits
- dictionary:board: 1 Hits
- circuit_designs: 1 Hits
- home:mbhp:module:lcd: 1 Hits
- sd_card_module: 1 Hits
- ain_module: 1 Hits
- home:project: 1 Hits
- dictionary:bridge: 1 Hits
- mc_protocol_mappings: 1 Hits
- bandmaster: 1 Hits
- msq-cc-lre-v2: 1 Hits
- midiboxkb_-_using_a_c64_keyboard_as_input: 1 Hits
- midiboxdmx: 1 Hits
- wilba_mb_seq_construction_guide: 1 Hits
- daw-encoder-display: 1 Hits
- wilba_mb_6582_base_pcb_construction_guide: 1 Hits
- eth_board_parts_list: 1 Hits
- midibox64e: 1 Hits
- coresound: 1 Hits
- daw-btn: 1 Hits
- gm5x5x5: 1 Hits
- quad_iic_midi: 1 Hits
- aout_4: 1 Hits
- elo: 1 Hits
- midibox_ay_3_8912_mixer: 1 Hits
- wilba_mb_seq_parts_guide: 1 Hits
- midi_io_matrix_board_parts_list: 1 Hits
- blm16x16v2: 1 Hits
- eusart_bug: 1 Hits
- windows_toolchain_codeblocks: 1 Hits
- din_module: 1 Hits
- mb_sync24: 1 Hits
- simple_cv: 1 Hits
- aout_board_parts_list: 1 Hits
- sammichsid: 1 Hits
- start: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- wcore_midi8: 1 Hits
- troubleshooting: 1 Hits
- sensors: 1 Hits
- home:mbhp: 1 Hits
- component: 1 Hits
- dougwellington_alps_type_n_motorfader_bulk_order: 1 Hits
- home:about:mbhp_acronyms: 1 Hits
- wilba_mb_6582: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- wcore_line-transmit: 1 Hits
- core_board_parts_list: 1 Hits
- ssm2044_pcb: 1 Hits
- dip: 1 Hits
- dip_switch: 1 Hits
- embedded_system: 1 Hits
- wikify:project: 1 Hits
- hardwired: 1 Hits
- midibox_seq: 1 Hits
- pci: 1 Hits
- scsi: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- stryd_one_codeblocks: 1 Hits
- wiki:test_page: 1 Hits
- ultra: 1 Hits
- home:software:windows:cadsoft_eagle: 1 Hits
- lpc17_core_board_parts_list: 1 Hits
- usb_gm5_module: 1 Hits
- lcd: 1 Hits
- loopa-eurorack-panel: 1 Hits
- transponder: 1 Hits
- midiboxmixersoftware: 1 Hits
- ainser64_board_parts_list: 1 Hits
- din_board_parts_list: 1 Hits
- euro-aout-ng-connector-board: 1 Hits
- opl3_board_parts_list: 1 Hits
- ainser8_board_parts_list: 1 Hits
- dio_matrix_board_parts_list: 1 Hits
- srio-router: 1 Hits
- dout_board_parts_list: 1 Hits
- home:skills:bad_solderings_gallery: 1 Hits
- getting_started_faq: 1 Hits
- protodeck: 1 Hits
- midibox_master_keys: 1 Hits
- dougwellington_mb6582_panels: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- home:project:midi_router: 1 Hits
- home:mbhp:parts: 1 Hits
- arumblack: 1 Hits
- pga:preconfigsoftware: 1 Hits
- stellax4: 1 Hits
- mididoc:midibox_cv_v2: 1 Hits
- sid_board_parts_list: 1 Hits