User Tools

Site Tools


display_driver

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
display_driver [2018/03/13 20:42]
latigid_on [Schematic]
display_driver [2018/03/31 13:46] (current)
latigid_on [Interconnection to Core]
Line 12: Line 12:
 The pinout for the display connectors is as follows: The pinout for the display connectors is as follows:
  
-{{:elo:oleds.png?​direct&​600|}}+{{:dispdriver:header_j1-j2.png?​direct&​600|}}\\ 
 +(Power is connected to pin 10.) 
 + 
 + 
 + 
 + 
 ---- ----
  
Line 131: Line 137:
  
 J15A1/J10B1 chain another Display Driver. Note that the J15 connection should not be mirrored for subsequent boards. J15A1/J10B1 chain another Display Driver. Note that the J15 connection should not be mirrored for subsequent boards.
 +
 +J9 is a power supply input that is sent to the displays over headers J1-J8. It may be better to wire the displays directly to the power supply rather than using the ribbon cable and connectors.
  
  
display_driver.1520973775.txt.gz · Last modified: 2018/03/13 20:42 by latigid_on