User Tools

Site Tools


euro-midi-io

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
euro-midi-io [2022/02/06 06:31]
phatline [EuroRack - Midi IO - Board]
euro-midi-io [2022/02/11 15:23] (current)
phatline [To Do]
Line 10: Line 10:
  
 {{:​phatline:​EURO_Midi_IO_Shematic.jpg?​900|}}\\ {{:​phatline:​EURO_Midi_IO_Shematic.jpg?​900|}}\\
 +
 +FIXME - The Connection from J1 to J2 is wrong - its 1:1 but it has to be crossed.\\
 ====== Hardware Requirements ====== ====== Hardware Requirements ======
   * Soldering Iron - with a Dip that can Handle Thruhole-Parts and 1206 SMDs, solder Paste...\\   * Soldering Iron - with a Dip that can Handle Thruhole-Parts and 1206 SMDs, solder Paste...\\
Line 76: Line 78:
 ---never the less i did not testet Rev.B... since i have enough Rev.A for my whole Modular-Rack @ home\\ ---never the less i did not testet Rev.B... since i have enough Rev.A for my whole Modular-Rack @ home\\
 so feel free to test - and report!\\ so feel free to test - and report!\\
 +{{:​phatline:​EURO_Midi_IO_Board.jpg?​900|}}\\
 +FIXME - dont use this - because of J1-J2 connection is wrong (this matter if you chain 2 Midi-IO-Modules\\
  
  
 ====== Frontpanel====== ====== Frontpanel======
 {{:​phatline:​Euro_Midi_IO_Panel-Dimensions.jpg?​900|}}\\ {{:​phatline:​Euro_Midi_IO_Panel-Dimensions.jpg?​900|}}\\
-**I made a DXF File which you can print, and drill it DIY  or  \\ +**I made a {{:​phatline:​EuroMidiIO-Panel-for-milling.zip?​900|DXF}}File which you can print, and drill it DIY  or  \\ 
-you can send to:** (once the prototypestate is gone)\\ +you can send to:**\\ 
-[[https://​shop.frontpanels.de/​custom-panels|frontpanels.de in germany]] 17,08€ a panel (5x-10%, 10x-20%, 20x-30%, 30x-40%, 100x-50%\\ +[[https://​shop.frontpanels.de/​custom-panels|frontpanels.de in germany]] 17,08€ a panel (5x-10%, 10x-20%, 20x-30%, 30x-40%, 100x-50%)\\ 
-[[https://​thebeast.co.uk/​2d/​|The Beast - UK]]\\ +I tested one with them - and yes they looking good - and they fit!:\\ 
-[[https://​www.schaeffer-ag.de/​en/​|Schaeffer-ag.de]]+\\ 
 +another good guy: [[https://​thebeast.co.uk/​2d/​|The Beast - UK]]\\ 
 \\ \\
 **Recommend Material**\\ **Recommend Material**\\
 2mm x 128.5 x 17.78 Aluminium, anodised\\ 2mm x 128.5 x 17.78 Aluminium, anodised\\
-{{:​phatline:​Frontpanel-EuroMidi.zip?​900|}} - NOT TESTET\\ 
 \\ \\
 **A cheaper way is: order a 1,6mm thick Aluminium PCB as Frontpanel:​**\\ **A cheaper way is: order a 1,6mm thick Aluminium PCB as Frontpanel:​**\\
-I will test this... ​this are the gerbers:\\+this are the gerbers:\\ 
 +{{:​phatline:​GERBER-EURO_MidiIO_FP.zip?​900|}}\\ 
 +I have testet it, and this 1.6mm Aluminium from JLCPCB is too thin, i endet up by sandwith 2 off them togehter - so its strong enough, since the Labels are reversed when use the PCB reversed - i now removed them in this gerber file!\\
 {{:​phatline:​Euro_Midi_IO_3D_RENDER-Panel.jpg?​900|}}\\ {{:​phatline:​Euro_Midi_IO_3D_RENDER-Panel.jpg?​900|}}\\
 +
  
  
 ====== To Do ====== ====== To Do ======
-Since i already debugged Rev.A and this is the overworked Rev.B there should ​not be much to doexcept to test the gerber filers... i am happy with Rev.A (have still PCBs so no check of RevB in near future!)\\+Use a other Midi-OUT-Activity Shematic! - its not working for high speed midi! - while Note-ON off is okMidiclock can make trouble ​(the Charge-Discharge Circuit ​in this Design is not sufficent for this!)\\
  
 ====== Community users working on it ====== ====== Community users working on it ======
euro-midi-io.1644129095.txt.gz · Last modified: 2022/02/06 06:31 by phatline