mbqg_tb_case
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
mbqg_tb_case [2024/01/20 02:32] smithy |
mbqg_tb_case [2024/01/20 02:43] (current) smithy |
||
|---|---|---|---|
| Line 12: | Line 12: | ||
| Huge thanks to Technobreath for taking the time to design this case! | Huge thanks to Technobreath for taking the time to design this case! | ||
| - | You will need 8 threaded inserts with an internal diameter of 3mm for use with Smithy's PCB Front panel | + | You will need 8 threaded inserts with an internal diameter of 3mm for use with [[http://midibox.org/forums/topic/19678-midibox-quad-genesis/?do=findComment&comment=200872|Smithy's PCB Front panel]] |
| You can find these m3 threaded inserts with an external diameter of 5mm commonly on | You can find these m3 threaded inserts with an external diameter of 5mm commonly on | ||
| - | [[https://a.aliexpress.com/_ExA45x3]AliExpress] | + | [[https://a.aliexpress.com/_ExA45x3|AliExpress]] |
| + | |||
| + | The default wooden case thickness is 9mm. | ||
| + | The 8 threaded inserts will need to be inserted to top of the wooden case. | ||
| + | I recommend using a 4mm drill bit to drill the pilot holes and drilling a depth of 6mm. | ||
| + | |||
| + | You can also use these threaded inserts in the base of the wooden enclosure to mount the PCBs. | ||
mbqg_tb_case.txt · Last modified: 2024/01/20 02:43 by smithy
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
