User Tools

Site Tools


midibox_cv_v1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
midibox_cv_v1 [2007/07/06 18:53]
admin
midibox_cv_v1 [2016/03/23 09:46] (current)
admin ↷ Page name changed from midibox_cv to midibox_cv_v1
Line 1: Line 1:
-MIDIBox CV is midi to CV converter project+**MIDIBox CV**\\ 
 +MIDI-to-control voltage ​converter project 
 + 
 +=====MBHP Hardware Requirements===== 
 + 
 +1 CORE module, 1 analog output module (AOUT, AOUT_LC, or AOUT_NG), 1 DINX1 module. 
 + 
 +Recommended: ​ LCD, BankStick. 
 + 
 +=====Documentation=====
  
   * [[http://​www.ucapps.de/​midibox_cv.html|MIDIbox CV]] <​sup>​uCApps</​sup>​   * [[http://​www.ucapps.de/​midibox_cv.html|MIDIbox CV]] <​sup>​uCApps</​sup>​
-  * [[How to use Midibox CV with a dout]] 
-  * [[How to use Midibox CV with a dout GERMAN]] 
  
 +=====Links=====
  
-**Proposals for additional functions in future firmware versions**+  ​[[how_to_use_midibox_cv_with_a_dout]] 
 +  ​[[how_to_use_midibox_cv_with_a_dout_german]] 
 +  ​[[http://​www.midibox.org/​forum/​index.php?​topic=10412.msg78685#​msg78685|How to use an encoder and up/down buttons on the same MIDIbox CV]] <​sup>​Forum</​sup>​
  
-Please add your ideas here:+=====Proposals for additional functions in future firmware versions===== 
 + 
 +(Please add your ideas here:)
  
    * One Page Up, one Page Down button should replace the Select button for faster selection of CV output    * One Page Up, one Page Down button should replace the Select button for faster selection of CV output
    * variable pulselength of gate outs depending on velocity    * variable pulselength of gate outs depending on velocity
 +   * Use individual CV-Outs for dynamic (eg velocity dependant) triggers or gates 
 +   * Adress note on to different trigger outs, depending on "​velocity zones",​ eg to turn on accent or glide by velocity ​       
 +   * Save different settings 
 +   * "​Rotate"​ note assignment in Poly mode (select "four voices"​ for example, then outputs 1-4 will rotate, advancing always with the next note. "​Random"​ would also be nice. See: Oberheim 4-Voice.) 
 +   * Vibrato LFO. Freerunning LFO summed into oscillator note output, amount controlled by Mod Wheel or Aftertouch, with a user-selected maximum output amount. In addition to existing note/pitch wheel summing. Useful here with multiple "​note"​ channels, as opposed to the MIDIbox SID's limit of 2. If use of LFO out only is desired, note value can be used as an offset. 
 +   * Support for realtime, encoder control of DIN Sync clock value (4 bars, 2 bars...1/4 notes, 1/4 note triplets, up to the maximum. See: Flame Clockwork. MIDI synch of LFO via this control, in this project, would be wonderful.) 
 +   * Independent Pitch Wheel +/- ranges. 
 +   * Support of multiple AOUTs to link 8-note/​8-gate with 8-velocity/​CC/​etc.
midibox_cv_v1.1183748022.txt.gz · Last modified: 2007/07/06 21:25 (external edit)