User Tools

Site Tools


mnmlcore

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mnmlcore [2018/08/02 02:20]
phatline
mnmlcore [2021/01/17 01:30] (current)
phatline [mnmlCore]
Line 1: Line 1:
 ====== mnmlCore ====== ====== mnmlCore ======
-we want to create small STM32F4 based Board (for example 10x4cm in size), with limited Pins/​sockets...\\+**--at the moment obsolete-- because there is [[dipcoref4]]!!!**\\ 
 +we want to create ​small STM32F4 based Board (for example 10x4cm in size), with limited Pins/​sockets...\\ 
 +[[FantomXR]] had made such a thing before, so we start with his working design, and invest some time in it\\ 
 +see also this article: [[http://​midibox.org/​forums/​topic/​20732-another-midibox-core/?​page=1|Another Midibox Core]]\\ 
 +I have started a new Tread in the Forum, so we can discuss things there: [[http://​http://​midibox.org/​forums/​topic/​20899-mnmlcore/​|mnmlcore]],​ but i hope that most of the things will be done in the wiki, so it is more clear\\
  
 ===== Introduction ===== ===== Introduction =====
 ...\\ ...\\
  
 +===== a Name =====
 +mnmlCore, miniCore32, ​ 10x4CORE, RFcore, fundimentalCore, ​ basisCore, baseCore, XRcore, midicore
 +
 +====== Design Concepts ======
 +phatlines idea with onboard-split-cut MidiIO:
 +{{:​phatline:​desing-concept-midi-port.jpg?​1000|}}\\
 +
 +====== PCB ======
 +=====the inital FantomXR Board:=====
 ==== Features ==== ==== Features ====
-- **...\\  +- **Size V0:** 98,5mm x 48,5mm \\ 
-- **...\\+- **Micro-SD-Slot**(flat @back on the board)\\ 
 +- **J8/9 SRIO** (for normal shiftregisters)\\ 
 +- **Midi A+B** (+HiSpeed? )(need external Optocoppler)\\ 
 +- **J30 Displays**(need external HC595)\\ 
 +- **Bootloader-Switch**(for program-alphas...debug)\\ 
 +- **onboard-Voltage-Regulator** (5V input regulated to 3,3V)\\ 
 +- **USB over Pinheader** (no onboard-socket)\\ 
 +- **USB-Power-Jumper**\\ 
 +- **J6+J7 - Pedals+Fader**:"​for an AINSER64-like-analog-scanning",​ "I made some pcbs with faders which I connect directly to that connectors"​ \\ 
 +- **SWD-Header** (to program BOOTLOADER into board by using for a example a Discovery-Board)\\ 
 +- **Reset-Header**\\ 
 +{{:​phatline:​FantomX-Core-V0-connectors.png?​600|}}\\ 
 + 
 +===== our modified Board:​===== 
 +==== improvements ==== 
 +[[FantomXR]] made some improvement in his other projects, so we also should change this things:\\ 
 +"For example I changed:​\\ 
 +the oscillator to SMD\\ 
 +all none-VDD-traces to 0.2032mm\\ 
 +all vias to round-style and 0.32mm diameter.\\ 
 +all 0603 SMD parts to 0805. 
 +removed the ID-pin from USB.\\ 
 +added an inductor behind the USB connector for EMC-improvements\\ 
 +
 + 
 +===== PCB Fabrication/​Pick and Place:​==== 
 +[[FantomXR]] have a pick and place machine, price he not knows up to now FIXME\\ 
 +need to ask him about the size of a sheet FIXME of multiple pcbs his machine can hold FIXME\\ 
 +find cheap PCB-Manufactor,​ which do this sheets FIXME for cheap FIXME\\
  
 ====== Hardware Requirements ====== ====== Hardware Requirements ======
Line 13: Line 54:
   * Soldering Iron, Wires, PCB....\\   * Soldering Iron, Wires, PCB....\\
   * USB Power Supply   * USB Power Supply
- 
-====== Design Concepts ====== 
- 
-{{:​phatline:​desing-concept-midi-port.jpg?​1000|}}\\ 
  
 ===== Resources ===== ===== Resources =====
mnmlcore.1533176402.txt.gz · Last modified: 2018/08/02 02:20 by phatline