Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 41 Hits
- not include instructions on how to make the most out of all the features of the sequencer, or what eac... icial manual for a particular menu page and check out what you can do with the options that are not men... hesizer (mono- or multitimbral) connected to MIDI OUT1 of the sequencer. If you don't, the guide will still be useful, but you'll have to find out yourself where you need to do things differently.
- home:mbhp:pic:eusart_bug: 15 Hits
- the MBHP_USB_PIC module. Unfortunately it turned out, that many PICs (such as the [[18f4620|PIC18F4620... ro bytes were sporadically inserted into the MIDI Out stream, so that the MIDI protocol was violated. A... module was used with minimal configuration (MIDI Out only).
Meanwhile the bug has been fixed by Micro... depends on the application. The EUSART based MIDI Out port of the core module will mostly work, you are
- introduction_to_ucapps.de: 14 Hits
- you can nearly always go down or leave something out like you want (e.g. it does not matter at all if ... complete songs with this! It´s mainly for peaking out 4/4 tact patterns and bending them in some cool s... pplication for combining two MIDI Ins to one MIDI Out. Please notice: Chances are high that this will b... o very easy applications which are used to filter out and/or process (meaning e.g. transposing, echoing
- flo: 13 Hits
- ted to it. So the effect can
be switched in and out of the signal path. \\
* If the loop is OFF, the FX is OUT of the signal path.
* If the loop is ON, the ... eries, the whole FX series can be switched in and out of the loop. In this series, each FX can still
... Route a signal to one of two outputs = Input -> A-out / B-out
* Muting Send. The loop can be used to
- eusart_bug: 13 Hits
- the MBHP_USB_PIC module. Unfortunately it turned out, that many PICs (such as the [[mios_pic18f4620|PI... depends on the application. The EUSART based MIDI Out port of the core module will mostly work, you are... a complete MBHP_IIC_MIDI module with MIDI In and Out port?=====
If you are using a PIC18F4620 B4 or l... : no, you only need the reduced version with MIDI Out port only.
The MIDI In port is *not* natively su
- mb_matrix: 12 Hits
- A-based add-on board together with a set of break-out boards and modules that allow for physically plac... ncoder (on the lower right) is used to select the out port, thereafter the in port is selected with the... ing note off messages on all MIDI channels to all out ports.
MIDIbox Matrix features break-out boxes (BOBs) that give access to 4 in and 4 out ports at a t
- wilba_mb_6582_base_pcb_construction_guide: 11 Hits
- option B.
People choosing this solution can work out for themselves what extra wiring, parts and solde... , use your multimeter to test the voltages coming out of your 7-pin DIN socket. Remember to always use ... on the top side, leaving enough to pull the lead out //from the top side// while the iron is on the jo... p all the solder in the joint, if you try to pull out the part after sucking up solder, then there's le
- mb-sidr8tr:start: 10 Hits
- t to know more about the latest happenings, check out [[http://midibox.org/forums/topic/15425-feedback-... rnal filters and have both a front and rear mixed out, I thought it best to create my own passive mixer... below for other boards). I also have not figured out if cable distance is going to be an issue or anyt... the supply discussed switches at 132kHz, which is out of the range of human hearing, but not out of the
- pic18f4685_8bit_lcd_driver: 10 Hits
- e second LCD option given by MIOS_LCD_TypeSet
;; Out: -
;; -------------------------------------------... function!
;; IN: data which should be sent
;; OUT: -
;; -------------------------------------------... nction!
;; IN: command which should be sent
;; OUT: -
;; -------------------------------------------... ; to wait until the LCD is unbusy
;; In: -
;; Out: -
;; -------------------------------------------
- john_e._finster: 10 Hits
- I could help him a little bit.
This is what came out of it. It´s not pretty, but it´s practical.
{{:f... once with the necessary cables.
The case is made out of beech wood, some detailed pictures will be pro... ?200|}}
After I finished soldering the pcb I cut out the spaces for the faders. I wanted to save space... ly built midi extension for the 3. and 4. midi in/out. I left it in because I want to properly finnish
- wickedblade: 9 Hits
- ble(and be able to physically separate the signal out from the digital circuits)
* went from 2 to 4 c... from behind):
* main output jack ~20mm
* MIDI OUT and IN, on over the other in quincunx, ~40mm (a D... hematics had said diode wired backwards), I found out that this is exactly what the "common free wheeli... ed linear (I've ordered it blindly, but it turned out good), the only caveat is that it has a plug that
- frequently_asked_questions_faq: 9 Hits
- estions (FAQ) ======
//FIXME Some updates needed out there//
This page summarizes the most frequently... some ready, digitally controlled tone generators out there, which you can buy with complete documentat... first, if you want to. When you're taking a chip out of some vintage computer, you're always dealing w... e Module, to convert the amount of voltage coming out of the pot, into a numerical value. Then, you can
- midibox_audiomatrix: 8 Hits
- g balanced/unbalanced signal on any individual in/out. My setup is a mixup of machines having balanced/... sert function -- ability to switch patches in and out of a preset chain.
* x number of realtime contr... g balanced/unbalanced signal on any individual in/out**
I think this is just a case of having balancing transformers on each in and out, and using a switching plug - ie a 6.5mm stereo h
- apparat_20_construction_blog: 8 Hits
- {seppoman:phone2.jpg}}
After throwing everything out, I examined the keyboard to find out how to use it.
{{seppoman:phone3.jpg}}
Under the control board ... h most of the connectors and the PSU section left out - the phone will be powered from the nice +5V, +/... avox ==
After disassembling the Metavox, I found out that there are two boards inside this tiny unit.
- gm5x5x5: 8 Hits
- wilba_mb_6582_psuopte: 7 Hits
- ssm2044_pcb: 7 Hits
- protodeck: 7 Hits
- midibox_speakjet_k64_modul: 7 Hits
- tos_-_a_tds_controller_blog: 7 Hits
- aout_ng: 7 Hits
- mbqg_fp: 7 Hits
- stuartm_stukontrol: 7 Hits
- midiboxmixer: 7 Hits
- home:mbhp:module:core: 7 Hits
- fnp-sid: 6 Hits
- home:mbhp:module:aout_ng: 6 Hits
- midiboxmixermanual: 6 Hits
- pedal_box:manual: 6 Hits
- wilba_mb_seq_construction_guide: 6 Hits
- using_pic18f4620: 6 Hits
- midibox_sid_faq: 5 Hits
- mbuntu:mbuntu: 5 Hits
- wilba_mb_6582_prototype: 5 Hits
- home:software:linux:mbuntu: 5 Hits
- changing_dout_pins: 5 Hits
- fixed_bor_setup: 5 Hits
- mbhp_genesis: 5 Hits
- mididocs:v4l:midiprocessing: 5 Hits
- wilba_midibox_rc: 5 Hits
- mididocs:seq:building: 5 Hits
- wilba_mb_6582_control_surface_construction_guide: 5 Hits
- mc_protocol_mappings: 5 Hits
- northernlightx: 4 Hits
- windows_mios32_toolchain_core: 4 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 4 Hits
- chaos_matrix: 4 Hits
- windows_toolchain_core: 4 Hits
- speakjet_breadboard_construction: 4 Hits
- drumstuff: 4 Hits
- frailn_ay-3-8912_mini_sale: 4 Hits
- gm5_expansion_5x5_board: 4 Hits
- sync_4_newbies: 4 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 4 Hits
- opl3_module_modified: 4 Hits
- questionable: 4 Hits
- troubleshooting_lcd_displays: 4 Hits
- dougs_solder_price_survey: 4 Hits
- home:project:midi_mapper: 4 Hits
- midibox_tia: 4 Hits
- triggermatrix: 4 Hits
- wilba_mb_6582: 4 Hits
- pad_4_4: 4 Hits
- lucem: 3 Hits
- home:skills:etching_pcbs: 3 Hits
- pga:stackboards: 3 Hits
- cc-looper: 3 Hits
- wilba_mb_6582_parts_list: 3 Hits
- sammichsid_waiting_list: 3 Hits
- mb808: 3 Hits
- msq-cc-bcr: 3 Hits
- mb-lre8x2cs_pcb: 3 Hits
- envelope-follower-bissel-based: 3 Hits
- trsequencer: 3 Hits
- howto_create_a_pcb_english_german: 3 Hits
- mb-lre8x2cs_rev4.6: 3 Hits
- mididocs:seq:blm16x16_build_guide: 3 Hits
- m16: 3 Hits
- electronics_basics: 3 Hits
- midibox_snes_apu: 3 Hits
- ssm2164_pcb: 3 Hits
- forum_highlights_huis: 3 Hits
- home:project:mb808: 3 Hits
- nils_bulk_terms: 3 Hits
- core_module: 3 Hits
- wilba_mb_6582_control_surface_parts_list: 3 Hits
- arkade: 3 Hits
- scratchcontroller: 3 Hits
- elo: 3 Hits
- seqv4plus_le_mec: 2 Hits
- dcb: 2 Hits
- home:skills:bad_solderings_gallery: 2 Hits
- home:mbhp:module:din_dout_pin_list: 2 Hits
- albs_waldorf_knob_-_order_no._3: 2 Hits
- midibox_lc_german: 2 Hits
- gm5x5x5_pcb_bulk_order: 2 Hits
- durisian: 2 Hits
- c_from_first_principles: 2 Hits
- mb-sidr8tr:mb-mtrx_bulk: 2 Hits
- stryd_one: 2 Hits
- dougwellington_mb6582_panels: 2 Hits
- stryd_one_mbhp: 2 Hits
- pga:purpose: 2 Hits
- wcore_midi8: 2 Hits
- stellax4: 2 Hits
- cubase: 2 Hits
- tpd_pcb: 2 Hits
- loopa-eurorack-panel: 2 Hits
- midibox_seq_quick_reference: 2 Hits
- korg_wavedrum_midification: 2 Hits
- fadercore_-_vlr-8odisp: 2 Hits
- application_development: 2 Hits
- mididocs:seq:launchpadblm: 2 Hits
- mb-lre8x2cs_pcb_bulk_order: 2 Hits
- home:mbhp:module:din: 2 Hits
- bipolar_12v_psu: 2 Hits
- home:skills:soldering: 2 Hits
- din_dout_pintable: 2 Hits
- midiboxfx_-_midifiying_analog_gear: 2 Hits
- mios_faq: 2 Hits
- forum_highlights_seq: 2 Hits
- hardsid.dll: 2 Hits
- pga:buildchanbrd: 2 Hits
- wcore_i2c: 2 Hits
- english_version: 2 Hits
- dictionary:bug: 2 Hits
- soldering: 2 Hits
- linux_midi: 2 Hits
- power_supplies: 2 Hits
- wiki:test_page: 2 Hits
- mb_2069: 2 Hits
- 16th_fixed_polysequencer: 2 Hits
- midimasterclock: 2 Hits
- output_modules: 2 Hits
- parts_faq: 2 Hits
- troubleshooting: 2 Hits
- i_o: 2 Hits
- mb909: 2 Hits
- mbcv_dindout: 1 Hits
- midibox_speakjet: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- mididocs:midibox_seq_v4l: 1 Hits
- kongatrigga: 1 Hits
- svn: 1 Hits
- windows_toolchain_svn: 1 Hits
- ju_control_roland_alpha_juno_control_panel_cs: 1 Hits
- where_to_order_components: 1 Hits
- cv1: 1 Hits
- mbhp_acronyms: 1 Hits
- wilba_mb_seq_parts_guide: 1 Hits
- albs_waldorf_knobs_2011_bulk_order: 1 Hits
- wiki:syntax: 1 Hits
- home:about:midibox: 1 Hits
- clock2audio2clock: 1 Hits
- midibox_quad_genesis: 1 Hits
- make_encoders_out_of_your_mouse: 1 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- sensors: 1 Hits
- simple_midi_specification: 1 Hits
- mb_visual_metronome: 1 Hits
- midibox64_e_patchmode: 1 Hits
- euro-midi-io: 1 Hits
- forum_netiquette: 1 Hits
- din_module: 1 Hits
- midibox_uc: 1 Hits
- msq-cc-lre-v2: 1 Hits
- pedal_box: 1 Hits
- core4disc: 1 Hits
- mb-digiroland: 1 Hits
- wilba: 1 Hits
- mb-twinsid: 1 Hits
- wikify: 1 Hits
- midi_interface_blacklist: 1 Hits
- mios: 1 Hits
- home:skills:constructing_enclosures: 1 Hits
- tm5-housing: 1 Hits
- tm5-gate-board: 1 Hits
- installing_gputils_and_sdcc_on_debian_linux: 1 Hits
- integrated_circuit: 1 Hits
- encoder_tables_in_c: 1 Hits
- sammichsid: 1 Hits
- midibox_lc: 1 Hits
- ainser8_module: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- midi_interface_whitelist: 1 Hits
- midibox_ay_3_8912_mixer: 1 Hits
- acsensorizer_04: 1 Hits
- mb-606re: 1 Hits
- ainser64_module: 1 Hits
- stm32f4_module: 1 Hits
- mios_c_simulator_-_debugger: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- msq-cc-lre: 1 Hits
- midibox_3396: 1 Hits
- electronics_diy_common_tools: 1 Hits
- stryd_one_preparation: 1 Hits
- midibox_ay_3_8912: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- seq_v4l_mk._ii: 1 Hits
- ssp_mmc: 1 Hits
- smithy: 1 Hits
- dictionary:4-bit_mode: 1 Hits
- speakjet_control_overview: 1 Hits
- midibox_ay_3_8912_tune: 1 Hits
- pga:midichart: 1 Hits
- rfid: 1 Hits
- pga:configmixer: 1 Hits
- photodiode: 1 Hits
- mbhp: 1 Hits
- opamp: 1 Hits
- oem: 1 Hits
- bad_solderings_gallery: 1 Hits
- wisefire: 1 Hits
- newbie: 1 Hits
- menno: 1 Hits
- ssm2164_getting_started: 1 Hits
- how_to_use_midibox_cv_with_a_dout: 1 Hits
- live: 1 Hits
- home:skills:references: 1 Hits
- line_filter: 1 Hits
- jakes_daddy: 1 Hits
- tk_gm5_jaycar_partlist: 1 Hits
- gslug: 1 Hits
- dano: 1 Hits
- installing_gputils_and_sdcc_on_osx: 1 Hits
- eisa: 1 Hits
- gain: 1 Hits
- stack: 1 Hits
- pga:preconfigsoftware: 1 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 1 Hits
- wikify:template:module: 1 Hits
- home:mbhp:module:core32: 1 Hits
- pga:choices: 1 Hits
- pga:smtsoldering: 1 Hits
- how_to_organize_a_bulk_order: 1 Hits
- pga:softwareoverview: 1 Hits
- seqv4plus_enc-plate: 1 Hits
- dseq32: 1 Hits
- synchromesh: 1 Hits
- pickit2: 1 Hits
- tk_gm5_bulkorder: 1 Hits
- midibox_cv_v1: 1 Hits
- sammichfm: 1 Hits
- wiki:dokuwiki: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- arumblack: 1 Hits
- home:mbhp:module:opl3: 1 Hits
- control_surface_troubleshooting: 1 Hits
- midibox_master_keys: 1 Hits
- elektor_vocoder: 1 Hits
- wcoref4_pcb: 1 Hits
- home:skills:tools: 1 Hits
- seqv4plus_jog: 1 Hits
- z80: 1 Hits
- albs_waldorf_knob_bulk_order: 1 Hits
- syntax: 1 Hits
- home:mbhp:parts: 1 Hits
- home:skills:troubleshooting: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- audiocommander: 1 Hits
- adding_buttons_for_bankstick_switching: 1 Hits