Differences

This shows you the differences between two versions of the page.

--- pcb [2006/03/16 19:53]
smashtv created
+++ pcb [2006/03/21 21:01]
5meo-geo
@@ Line 1: / Line 1: @@
-PCB is short for "Printed Circuit Board".  One way to think of them is as a stencil or blueprint for a circuit or device.  When a PCB is made, the task of putting together a circuit is much easier, since all the connections are premade-- it's just a matter of mounting individual parts.
-One issue to note for those new to soldering(at least, one issue that I had):  It's possible for the etching on a PCB to come up if heat from the soldering iron is misapplied or applied too much.  While this is a real hassle, it should be possible to solve by bridging either with insulated wire(soldering one end to each side of the formerly-closed circuit path) or by some other means.
-One way to avoid this is to get a good desoldering tool.  RadioShack has a couple, one of which is a simple trigger-operated vacuum, and the other is a combination soldering-iron-and-vacuum with a squeezebulb for intake.  This seemed a bit strangely designed to me, plus it was 45 watts which would probably toast something.
-In short, it's best to get practice soldering before one messes up a MIDIBox CoreModule!
-PCBs for MIDIBox modules can be found at SmashTV's website http://mbhp.avishowtech.com as well as at a German site I can't remember the URL for.

MIDIbox