pcb
Search
You can find the results of your search below.
Results
- wilba_mb_6582_base_pcb_construction_guide: 63 Hits
- ======= MB-6582 Base PCB Construction Guide =======
**Please read the entire construction guide befor... starting to solder anything.**
**Note that Base PCB revision 1 (the red ones bought directly from me)... 582. I assume people constructing an MB-6582 base PCB have a basic level of electronics knowledge and s... electrical current flows along the tracks on the PCB, that all points along that track should measure
- wilba_mb_6582: 49 Hits
- e few crazy SID fans who might want just the base PCB to upgrade their current MIDIbox SID to the new m... y the revised PCBs, whether just using the **base PCB** (with the PICs and SIDs on it) or the **control surface PCB** (with the switches, LEDs and rotary encoders).
====== PCB Specifications/Requirements ======
===== Base PC
- wilba_mb_6582_control_surface_construction_guide: 48 Hits
- ple NOT TO SOLDER ANYTHING to the control surface PCB until you read the finished control surface const... that you should use an UNSOLDERED control surface PCB as a guide for:
- marking on the frontpanel wher... ded spacers to the frontpanel). You put panel and PCB together and use a pencil through the holes where... and threaded spacers in exact alignment with the PCB when gluing them to the frontpanel.
Then after y
- wilba_mb_seq_construction_guide: 37 Hits
- e build process I followed to assemble the MB-SEQ PCB and panel.
====== Using a panel made by FPE/Scha... o attach the panel to a case and also support the PCB to the panel. Studs can be made out of 18mm lengt... aded spacers, i.e. through the mount holes of the PCB. You do not need to use as many threaded spacers as mount holes in the PCB. (The three mount holes without plating are for o
- mb-lre8x2cs_pcb_bulk_order: 27 Hits
- 6.5% (with 5% I lost money).
===== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface=====
Welc... ://midibox.org/forums/topic/17378-control-surface-pcb-for-16-encodersledrings-bulk-order/ |here]].
You can find the tread of the PCB design [[http://midibox.org/forums/topic/16973-di...
This bulk order concern the last revision of the PCB that is rev 2.4.
The price is <del>14€</del> <de
- mbqg_fp: 22 Hits
- part below):
* An aluminum front panel **OR** PCB Front Panel from Smithy ([[http://midibox.org/for... ) **OR** 3D Printed Front Panel (See Below)
* A PCB to hold all the buttons, LEDs, encoders, etc., an... 16-pin IDC cables, for connecting the front panel PCB to the core's J8/9 and for connecting the LCD to ... s 15" x 11" (38.1 x 27.9 cm), and the front panel PCB itself is 13.85" x 9.85" (35.18 x 25.02 cm), leav
- control_surface_troubleshooting: 22 Hits
- 582 control surface trouble shooting based on the PCB version 2.0. Please note that inappropriate worki... surfaces may have a fault on the control surface PCB as well as on the Base PCB. Therefore it is important to disconnect the CS PCB from the base PCB in order to separate the root ca
- mb-lre8x2cs_pcb: 21 Hits
- ====== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface ======
Welcome to the wiki page of the c... s and 16 encoders.
You can find the tread of the PCB design [[http://midibox.org/forums/topic/16973-di... -verification/ |here]].
The last revision of the PCB is rev 2.5.
It is a very practical and cheap way... ontroller without having to wire LEDrings.
===== PCB =====
The PCB have components soldered on the tw
- scs_pcb: 21 Hits
- ster/apps/tutorials/027_scs|tutorial #027]].
The PCB I have designed can accommodate three different t... of switches: my favourite switches from [[16x4blm_pcb|Marquardt (6425 series)]], TK's favourites from I... series) available at Reichelt, and the [[16x4blm_pcb|E-Switch TL1100 series]] (see e.g. MB SEQv4) can ... s:ilmenator:scs_tk:scs_tk_v1.0.pdf|here}}.
===== PCB =====
As with any user interface board, form foll
- wilba_mb_6582_parts_list: 21 Hits
- erefore, you should read the [[wilba_mb_6582_base_pcb_construction_guide|MB-6582 Base PCB Construction Guide]] and decide on the PSU option and sockets you plan to use.
If you are constructing the base PCB, you will require all the parts listed here, with... ion A, B, C or D you are using
* Parts that are PCB mounted sockets (if you are not using the PacTec
- john_e._finster: 17 Hits
- at head + metal tube) on the "button-side" of the pcb, put some adhesive on the frontpanel as well and gently placed the pcb on the frontpanel. The buttons and knobs guided the pcb to its right position.
The leds are just placed roughly on the pcb before I glued it onto the frontpanel and soldere
- mb_matrix: 17 Hits
- I/O boards
* 14x BOBs
plus a core board and the PCB holding the user interface.
{{:home:users:ilmena... break). Located on the soldering side of the BOB PCB are a number of SMD resistors in 1206 size. There... d to apply a pair of screws to secure them to the PCB from underneath. The BOB's PCB has the corresponding holes, so for minimum mechanical stress screw you
- 16x4blm_pcb: 16 Hits
- ====== MIDIbox SEQ BLM 16x4 Control Surface PCB ======
In order to enhance my MB SEQv4 with an interna... his is simple: In my front panel there is a [[TPD_PCB|TPD]] (Track Position Display), a step display, a... ed ([[http://www.goldphoenixpcb.com/|Gold Phoenix PCB]]) has a size limit that I had to respect.
=====... o show all the components that are sitting on the PCB. {{:home:users:ilmenator:blm_schematic_v1.0.pdf|H
- tpd_pcb: 16 Hits
- ol surface panel, and to the left of my [[16x4blm_pcb|16x4 Button LED Matrix board]]. This makes for a ... ol surface board. An additional module ([[16x4blm_pcb|16x4 BLM]]) can be connected to a second 10pin co... r the MB SEQ itself to function properly.
===== PCB =====
The board is relatively small at roughly 8... s. Kit price for all you need to build this, i.e. PCB including every part on the BOM below, is 50€.
=
- gm5x5x5: 16 Hits
- home:skills:etching_pcbs: 15 Hits
- howto_create_a_pcb_english_german: 15 Hits
- wilba_mb_6582_prototype: 15 Hits
- mb-lre8x2cs_rev4.6: 14 Hits
- seqv4plus_le_mec: 13 Hits
- fnp-sid: 12 Hits
- wilba_mb_seq: 12 Hits
- wilba_mb_6582_control_surface_parts_list: 11 Hits
- kicad: 10 Hits
- stellax4: 10 Hits
- lre-oled-bar2: 9 Hits
- user_projects: 9 Hits
- envelope-follower-bissel-based: 9 Hits
- euro-midi-io: 9 Hits
- ultracore: 8 Hits
- mididocs:seq:blm16x16_build_guide: 8 Hits
- protodeck: 8 Hits
- cc-looper: 8 Hits
- fadercore_-_vlr-8odisp: 8 Hits
- loopa-eurorack-panel: 8 Hits
- sammichsid: 7 Hits
- euro-aout-ng-connector-board: 7 Hits
- fairlightiii: 7 Hits
- seqv4plus_enc-plate: 7 Hits
- basics: 7 Hits
- home:mbhp:module:core: 7 Hits
- wilba_mb_6582_pcbthread: 7 Hits
- phatline: 7 Hits
- blm16x16v2: 7 Hits
- mididocs:seq:building: 7 Hits
- easy_cv: 6 Hits
- sammichfm: 6 Hits
- lre5-lcd2: 6 Hits
- aout_ng: 6 Hits
- home:mbhp:module:aout_ng: 6 Hits
- ilmenator: 6 Hits
- seq_v4l_mk._ii: 6 Hits
- kongatrigga: 6 Hits
- mb-606re: 5 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 5 Hits
- mb-digiroland: 5 Hits
- home:mbhp:module:lcd: 5 Hits
- frequently_asked_questions_faq: 5 Hits
- pcb: 5 Hits
- make_encoders_out_of_your_mouse: 5 Hits
- wilba_mb_seq_parts_guide: 5 Hits
- tools: 5 Hits
- ssm2164_getting_started: 5 Hits
- wilba_mb_6582_psuopte: 5 Hits
- wild_weasel: 5 Hits
- ssm2044_pcb: 5 Hits
- cv1: 5 Hits
- xyz-ir-controller: 5 Hits
- tm5-gateinput: 5 Hits
- tm5-gate-board: 5 Hits
- mnmlcore: 5 Hits
- mididocs:seq:hardwareconfig: 4 Hits
- simple_cv: 4 Hits
- fadercore_-_vlr-8x16ledmeter: 4 Hits
- etching_pcb: 4 Hits
- mb909: 4 Hits
- fadercore_-_vlr-8enc: 4 Hits
- tm5-dindoutgate: 4 Hits
- midibox_ay_3_8912_board: 4 Hits
- clock2audio2clock: 4 Hits
- home:mbhp:module:din: 4 Hits
- eagle: 4 Hits
- daw-encoder-display: 4 Hits
- lre-oled-bar: 4 Hits
- gm5_expansion_5x5_board: 4 Hits
- fadercore_-_vlr-3x8but: 4 Hits
- tk_gm5_jaycar_partlist: 4 Hits
- mb-twinsid: 4 Hits
- displaydriver-smd: 3 Hits
- gm5x5x5_pcb_bulk_order: 3 Hits
- midibox_tia: 3 Hits
- lorcan: 3 Hits
- chaos_matrix: 3 Hits
- questionable: 3 Hits
- tos_-_a_tds_controller_blog: 3 Hits
- mbhp4066: 3 Hits
- mb_rgb-led_matrix_8x8: 3 Hits
- srio-router: 3 Hits
- ssm2044_pcb_bulk_order: 3 Hits
- midiboxfx_-_midifiying_analog_gear: 3 Hits
- home:skills:tools: 3 Hits
- wiki:test_page: 3 Hits
- lcd: 3 Hits
- wilba_mb_6582_power_switch_bulk_order: 3 Hits
- scs_module: 3 Hits
- tm5-codeblock: 3 Hits
- fadercore_-_vlr-motorfader: 3 Hits
- modules_and_parts: 3 Hits
- home:mbhp:module:core32: 3 Hits
- din_module: 3 Hits
- mb_2069: 3 Hits
- mididocs:midibox_seq_v4: 3 Hits
- dipboardf4: 3 Hits
- daw-ableton: 3 Hits
- wcore_midi8: 3 Hits
- daw-btn: 3 Hits
- wilba_mb_seq_pcb_bulk_order: 3 Hits
- fantomxr: 3 Hits
- doutx2dinx1: 3 Hits
- kristal: 3 Hits
- wilba_mb_6582_panels: 3 Hits
- openpad-codeblock: 3 Hits
- core4discmidiex: 3 Hits
- msq-cc-lre-v2: 2 Hits
- pcd8544: 2 Hits
- triggermatrix: 2 Hits
- wilba: 2 Hits
- midiboxkb_-_using_a_c64_keyboard_as_input: 2 Hits
- peake: 2 Hits
- home:software:windows:cadsoft_eagle: 2 Hits
- wilba_bulk_orders: 2 Hits
- mb_mixer_pcb_bulk_order: 2 Hits
- triggermatrix4: 2 Hits
- usb_gm5_module: 2 Hits
- midi_interface_blacklist: 2 Hits
- triggermatrix5: 2 Hits
- home:mbhp:module:opl3: 2 Hits
- apparat_20_construction_blog: 2 Hits
- layout_improvements: 2 Hits
- core4disc: 2 Hits
- home:mbhp:module:din_dout_pin_list: 2 Hits
- msq-cc-lre: 2 Hits
- midibox_ay_3_8912_mixer: 2 Hits
- acsensorizer_04: 2 Hits
- tk_gm5_bulkorder: 2 Hits
- openpad: 2 Hits
- din_dout_pintable: 2 Hits
- home:skills:soldering: 2 Hits
- home:software:linux:mbuntu: 2 Hits
- m16: 2 Hits
- dipboardf4_modules: 2 Hits
- gslug: 2 Hits
- mb-sidr8tr:start: 2 Hits
- stuartm_stukontrol: 2 Hits
- mb_olre16: 2 Hits
- wcore_i2c: 2 Hits
- encyclopedia_entries: 2 Hits
- soldering: 2 Hits
- mbuntu:mbuntu: 2 Hits
- wikify:template:module: 2 Hits
- wcoref4_pcb: 2 Hits
- mbcv_dindout: 2 Hits
- seq_v4_plus: 2 Hits
- wcore: 2 Hits
- gm5x5x5_errata: 2 Hits
- findbuddha: 2 Hits
- mbhp: 2 Hits
- ucoregb: 2 Hits
- sid_board_parts_list: 1 Hits
- where_to_order_pre-made_printed_circuit_boards_pcbs_and_parts_kits: 1 Hits
- soundcards_with_ymf262_and_or_yac512_chips: 1 Hits
- midibox_snes_apu: 1 Hits
- midibox_ay_3_8912: 1 Hits
- floorboard: 1 Hits
- aout_lc_module: 1 Hits
- ssm2164_pcb: 1 Hits
- midibox_sid_faq: 1 Hits
- eusart_bug: 1 Hits
- wikify:mbhp: 1 Hits
- wikify:skills: 1 Hits
- mios_pin_list: 1 Hits
- mb-fmx2: 1 Hits
- home:skills:constructing_enclosures: 1 Hits
- wcore_res-sd: 1 Hits
- dictionary:board: 1 Hits
- display_driver: 1 Hits
- elo: 1 Hits
- mb-lre8x2cs_bulk_order_2014: 1 Hits
- wcore_usb: 1 Hits
- electronics_diy_common_tools: 1 Hits
- 16th_fixed_polysequencer: 1 Hits
- msq-cc-bcr: 1 Hits
- scs-oled: 1 Hits
- wilba_mb_6582_builders_list: 1 Hits
- midibox_3396: 1 Hits
- where_to_order_components: 1 Hits
- antixfm: 1 Hits
- home:mbhp:module:dout: 1 Hits
- home:mbhp:parts: 1 Hits
- selfservice: 1 Hits
- peterpressure: 1 Hits
- midibox_8x8_standalone_matrix: 1 Hits
- logic_board: 1 Hits
- gm5x5x5_-_allied_parts_list: 1 Hits
- ultra: 1 Hits
- control_board: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- dj3nk: 1 Hits
- tk_mbseqv4l_pcb_bulk_order: 1 Hits
- home:project:mb808: 1 Hits
- home:mbhp: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- trace: 1 Hits
- home:skills:troubleshooting:hardware: 1 Hits
- siliconheaven: 1 Hits
- midibox_speakjet_k64_modul: 1 Hits
- pinheader: 1 Hits
- midibox: 1 Hits
- eagle3d_midibox_user_pack: 1 Hits
- case_and_frontpanels_diy_common_tools: 1 Hits
- circuit_designs: 1 Hits
- mididoc:midibox_cv_v2: 1 Hits
- mbqg_tb_case: 1 Hits
- seppoman: 1 Hits
- troubleshooting: 1 Hits
- parts_faq: 1 Hits
- midibox_pokey: 1 Hits
- wickedblade: 1 Hits
- cadsoft_eagle: 1 Hits
- mididocs:seq:blm16x16_x: 1 Hits
- home:skills: 1 Hits
- home:project:midi_mapper: 1 Hits
pcb.txt · Last modified: 2006/10/15 09:35 (external edit)