User Tools

Site Tools


pinheader

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pinheader [2016/06/15 12:54]
psykhaze
pinheader [2016/07/11 00:00] (current)
psykhaze
Line 4: Line 4:
  
 A pinheader is a basic connector to plug things on your PCB without having them soldered. A pinheader is a basic connector to plug things on your PCB without having them soldered.
-It can be **single or dual row** (SIL-DIL). The usual pitch, aka the distance between 2 pins is 2,54mm.+ 
 +It can be **single or dual row** (SIL-DIL). ​ 
 + 
 +The usual pitch, aka the distance between 2 pins is **__2,54mm__**.
 A pin header is designed to be splitted that you can have only the number of pins required to solder. A pin header is designed to be splitted that you can have only the number of pins required to solder.
pinheader.txt · Last modified: 2016/07/11 00:00 by psykhaze