Differences

This shows you the differences between two versions of the page.

--- sammichsid [2012/12/06 23:23]
wilba updated prices
+++ sammichsid [2022/02/26 05:42] (current)
latigid_on
@@ Line 62: / Line 62: @@
 ===== sammichSID Build Guide =====
-You can find v1.0 of the build guide here (zipped 6MB PDF):
+You can find v1.0 of the build guide here (zipped 11MB PDF):
+{{projects:sammichsid_build_guide_v1_0.zip}}
-{{http://www.mb6582.org/sammichSID/sammichSID_Build_Guide_v1_0.zip}}
 (I zipped it so you would be forced to download it and not view it in your browser)
@@ Line 76: / Line 77: @@
 Here are the PCB layouts in PDF format, for troubleshooting purposes. Note the base PCB has ground plane removed, i.e. pins on the ground plane will be shown without any tracks connected to them, but you can tell on the PCB that they are connected to the ground plane.
-{{http://www.mb6582.org/sammichSID/sammichSID_Base_PCB.pdf}}
+{{http://www.schickt.de/mb.org/sammichSID_Base_PCB.pdf}}
-{{http://www.mb6582.org/sammichSID/sammichSID_CS_PCB.pdf}}
+{{http://www.schickt.de/mb.org/sammichSID_CS_PCB.pdf}}
 ===== sammichSID Power Supply =====
@@ Line 110: / Line 111: @@
 [[http://www.redbubble.com/people/wilba/t-shirts|{{http://ih2.redbubble.net/work.4115679.4.fig,red,mens,fbfbfb.sammichsid-white-print-v3.jpg}}]]
+===== sammichSID 8-bit OLED driver =====
+sfred created a firmware for OLED displays:
+{{ :sammichsid:setup_sammich_sid_8bit-oled.zip |}}

MIDIbox