MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Standard Control Surface (SCS) =======

{{ ::neonking:midio128_v3_cs.jpg?direct&600 |}}

===== Introduction =====

The Standard Control Surface (SCS) allows to edit some (but not all) configuration values without the need of a computer.

===== Description =====

A detented rotary encoder and 6 buttons are directly connected to J10 of the Core module to control the menu system.In addition a LCD is required. The recommended size is at least 2x20! Graphical LCDs (GLCDs) are supported as well.

The [[MIDIO128]] project uses the same control surface, which means that users who built a MIDIO128 can upload the MIDIbox NG firmware and control it with their existing hardware, and vice versa!

In the main page (which is active after power-on) it's possible to emulate BUTTON and ENC functions, which means that a very basic MIDI controller with a rotary encoder + 6 buttons could be created without the need to attach a MBHP_DIN module to the core!

===== Schematic =====

{{ ::neonking:mbng_scs.jpg?direct&800 |}}

===== SCS PCB =====

**[[scs_pcb|SCS PCB]]** by ilmenator

MIDIbox

User Tools

Site Tools

Page Tools