MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== MIDIbox SCS Standard Control Surface module ======

The SCS module implements a standard user interface that is available as a module in the MIOS codebase. It goes nicely with a 20x character LCD and connects to J10 on the core board. An application example can be found in [[http://svnmios.midibox.org/listing.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Ftutorials%2F027_scs%2F|tutorial #027]].

The PCB I have designed can accommodate three different types of switches: my favourite switches from [[16x4blm_pcb|Marquardt (6425 series)]], TK's favourites from ITT Schadow (D6 series) available at Reichelt, and the [[16x4blm_pcb|E-Switch TL1100 series]] (see e.g. MB SEQv4) can be used.

===== Schematic =====
The v1.0 schematic of the MIDIbox SCS board can be downloaded {{:home:users:ilmenator:midibox_scs_v1.0_schematics.pdf|here}}.

===== Layout =====
As with any user interface board, form follows function here. Switches and encoder are mounted on the front, everything else sits on the back of the PCB. There are mounting holes all over the PCB, SW5 (on the lower left) doubles the encoder switch if needed, e.g. to act as a "fast" button.


The total size of the PCB is 97mm x 49mm.

MIDIbox

User Tools

Site Tools

Page Tools