Search
You can find the results of your search below.
Results
- wilba_mb_6582_base_pcb_construction_guide: 25 Hits
- acks on the PCB, that all points along that track should measure the same voltage, etc.
So some parts of ... PT-10 case (like the original MB-6582), then you should use a Commodore 64 power supply (i.e. the thing w... lator. I am just giving people some extra options should they get really stuck buying a C64 power supply./... ther you're a newbie or veteran at soldering, you should still have a look at soldering guides and other i
- mididocs:seq:beginners_guide:start: 17 Hits
- are called the left LCD and right LCD.
The unit should have at least one physical MIDI IN and one physic... ings for G1T1 and G1T2://
>>>
>>>// • Track type should be "Note"//
>>>// • Maximum length should be 128 steps//
>>>// • Port should be 'Def.' (or 'OUT1')//
>>>// • the MIDI channel (Chn.) should be wh
- windows_toolchain_svn: 15 Hits
- od of creating the keypair. Run the program - you should see the icon in your Start Menu after using the a... ere's how to set up PuTTY:
\\
\\
Run PuTTY. There should be an icon in your start menu.
\\
\\
In the tree-... he public one) you saved earlier. Hit 'Open'. You should see a screen like this:
\\
{{wiki:svn_win:putty1....
\\
Now drill to 'Session' in the tree-view. This should be the same screen you saw when you first ran PuT
- frequently_asked_questions_faq: 14 Hits
- ary encoders. We use the 'relative' type.
* ** Should I buy linear or logarithmic pots/faders? **
Linea... " or "log." index for every pot type - if not you should call your distributor and ask him before you buy ... nt do DIY and don't want to do without a PCB, you should look for a company which is specialized for proto... **
Before you plug the ICs into the sockets, you should measure the voltage levels at the power pins (Vss
- eclipse: 14 Hits
- ect a workspace. If unfamiliar with Eclipse, you should just use the default workspace location for now.
... k.
\\
{{:eclipse:go_to_workbench.jpg|}}
\\
You should now be presented with the Eclipse workbench. To ... click 'OK' button. The app_skeleton_cpp project should appear in the 'Projects' field of the 'Import' window, its checkbox should be checked. Click 'Finish' button.
\\
{{:eclipse
- pga:buildregbrd: 13 Hits
- power switch you have chosen. The secondary side should have three wires. Two are the 8VAC windings,and t... , read the transformer documents to see which two should be connected as the center tap. If you have a mul... he other secondary leads with the read lead. Each should read about 8 volts. If one reads eight and the ot... terminal of the regulator board connector.
Now it should look something like this:
{{pga:txandbridge.gif}}
- wickedblade: 12 Hits
- ons (edit/cancel and store) and 2 rotary encoders should do it.
The pedalboard will send program change c... have to be careful with my measurements, but this should work.
==== Possible relays ====
All relays are ... ds (mainly noise problems), but I'm thinking this should be okay, because the voltage is DC and the intens... will be finished...
The channel switching relays should be simple 5VDC SPST (normally open) relays. I fou
- wilba_mb_6582: 11 Hits
- ultiple MIDIbox modules into one compact PCB, and should work exactly the same as connecting multiple MIDI... mance in the firmware, the Modulation Matrix LEDs should be wired with common cathodes in vertical columns... nc", "CC", "Edit", "Play" are in the wrong order (should be "Play", "Edit", "CC", "Sync")**
** EDIT 2 - The menu button should be at the intersection of "JD8-D3 & JD5-D3" NOT "
- windows_toolchain_core: 11 Hits
- ean installation. We all hate to do this, but you should start by uninstalling any of the following applic... cc.sourceforge.net/doc/sdccman.pdf|here]], but it should be installed with SDCC. If you are getting the sn... * Add these entries if they don't exist (Entries should be separated by semicolons):
* ;C:\MSYS\1.0\b... ct the variable 'PATH' and click 'Edit'.
* This should be empty now (remember you cut it out before?). H
- windows_toolchain_codeblocks: 11 Hits
- ww.mingw.org|MinGW]].
**Enough of that.**\\
You should have come here after the [[windows_toolchain_core... ave decided this previously in this tutorial) you should install the GDB to assist you in the debugging pr... purposes, CodeBlocks latest nightly build version should be installed.
//If there is an existing version ... will detect and configure installed compilers. It should find 'GNU GCC Compiler' if you installed MingW, a
- wilba_mb_6582_control_surface_construction_guide: 10 Hits
- struction guide.
The reason for this is that you should use an UNSOLDERED control surface PCB as a guide ... sanding (roughening) the places where the JB-Weld should go. Please wait until someone has tried this meth... y be required to prepare the places where JB-Weld should go, by sanding (roughening) the surface** (I have... bs of JB-Weld on panel where the threaded spacers should go
put together panel and PCB (with the spacers
- elo: 9 Hits
- nake pattern entering at J1 and exiting at J2. R1 should be installed as a resistor 220-470R for the first... ft encoders have the pin directions swapped; this should be taken into account in an MB_NG file. In theory... ed.
* If touch sensors __are__ used, then RN2/5 should be omitted. The inverter gates ensure a defined l... ?direct&400|}}
The reset circuits R9/R10/C29/C30 should be installed. The termination circuits R3-6/C25-2
- seqv4plus_le_mec: 9 Hits
- (CC) pin.
* Stating the obvious: the LED legs should be pointing up!
* Using a screwdriver or other... o leave the cathode pins unbent for now, as these should either be soldered carefully so the switch can st... 47R from A to 1 and B to 2 for each instance. RJ9 should match RJ1. For blue and green, solder A to 2 and ... lus_beat_led|Beat LED]] and so 100-220R resistors should be used here.
==== SJs ====
* SJs are simi
- mbqg_fp: 9 Hits
- ion if you use acrylic which is much thicker (2mm should probably be fine but 3mm might be a problem, with... nd screw mounting holes are 1/8" (3.17 mm), which should give 3mm LEDs a little play (some are in practice... completely up to personal preference, though you should always use the same two colors beneath all bi-col... de), and each one has a cathode marking, so there should never be any confusion. With the exception of the
- mbhp_genesis: 9 Hits
- pic18f4685_8bit_lcd_driver: 8 Hits
- bipolar_12v_psu: 8 Hits
- parts_faq: 8 Hits
- windows_mios32_toolchain_core: 8 Hits
- introduction_to_ucapps.de: 8 Hits
- pedal_box:manual: 8 Hits
- wilba_mb_6582_parts_list: 7 Hits
- stryd_one_codeblocks: 7 Hits
- installing_gputils_and_sdcc_on_osx: 7 Hits
- mb_matrix: 7 Hits
- wiki:syntax: 7 Hits
- midibox_audiomatrix: 7 Hits
- midibox_sid_faq: 7 Hits
- aout_ng: 6 Hits
- soldering: 6 Hits
- wilba_mb_seq_construction_guide: 6 Hits
- troubleshooting: 6 Hits
- using_pic18f4620: 6 Hits
- wcoref4_pcb: 6 Hits
- home:mbhp:module:core: 6 Hits
- home:skills:soldering: 6 Hits
- pga:buildoutbrd: 5 Hits
- howto_create_a_pcb_english_german: 5 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 5 Hits
- home:skills:etching_pcbs: 5 Hits
- home:skills:troubleshooting:hardware: 5 Hits
- control_surface_troubleshooting: 5 Hits
- syntax: 5 Hits
- enc_4_4: 5 Hits
- aout_lc_module: 4 Hits
- troubleshooting_lcd_displays: 4 Hits
- pedal_box:pc_editor_manual: 4 Hits
- tos_-_a_tds_controller_blog: 4 Hits
- mios_faq: 4 Hits
- pga:preconfigsoftware: 4 Hits
- pga:inputchoices: 4 Hits
- wilba_mb_6582_panels: 4 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 4 Hits
- mcan: 4 Hits
- home:mbhp:module:aout_ng: 4 Hits
- sync_4_newbies: 4 Hits
- home:project:midibox_sid:tb303_mode: 4 Hits
- home:project:midibox_sid_tb303_mode: 4 Hits
- fnp-sid: 4 Hits
- seq_v4l_mk._ii: 4 Hits
- midibox_master_keys: 4 Hits
- midibox_sid_tb303_mode: 4 Hits
- mididocs:seq:blm16x16_build_guide: 4 Hits
- changing_din_pins: 3 Hits
- pga:configmixer: 3 Hits
- pga:compile: 3 Hits
- mtbf: 3 Hits
- dougs_solder_price_survey: 3 Hits
- midibox_speakjet_k64_modul: 3 Hits
- how_to_organize_a_bulk_order: 3 Hits
- speakjet_breadboard_construction: 3 Hits
- midiboxmixer: 3 Hits
- acsensorizer_04: 3 Hits
- wcore_res-sd: 3 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 3 Hits
- korg_wavedrum_midification: 3 Hits
- mb-sidr8tr:start: 3 Hits
- wilba_mb_6582_prototype: 3 Hits
- wcore: 3 Hits
- windows_toolchain_quickstart: 3 Hits
- layout_improvements: 3 Hits
- c_tips_and_tricks_for_pic_programming: 3 Hits
- macos_mios32_toolchain_core: 3 Hits
- simple_midi_specification: 3 Hits
- home:skills:bad_solderings_gallery: 2 Hits
- button_overlay: 2 Hits
- midibox_snes_apu: 2 Hits
- mididocs:v4l:midiprocessing: 2 Hits
- midi_specification: 2 Hits
- mios: 2 Hits
- midiboxdmx: 2 Hits
- pedal_box: 2 Hits
- home:skills:constructing_enclosures: 2 Hits
- layering_the_ui: 2 Hits
- home:mbhp:module:lcd: 2 Hits
- apparat_20_construction_blog: 2 Hits
- windows_toolchain_notepadplus: 2 Hits
- mios_c_simulator_-_debugger: 2 Hits
- wilba_mb_6582_control_surface_parts_list: 2 Hits
- installing_gputils_and_sdcc_on_fedora_core_5: 2 Hits
- how_to_setup_xcode3_to_access_the_svn_server: 2 Hits
- midiboxmixersoftware: 2 Hits
- mb-lre8x2cs_rev4.6: 2 Hits
- bad_solderings_gallery: 2 Hits
- pga:smtsoldering: 2 Hits
- mididocs:seq:building: 2 Hits
- pga:buildchanbrd: 2 Hits
- mb808: 2 Hits
- questionable: 2 Hits
- gm5x5x5_noob_guide: 2 Hits
- linux_mios32_toolchain_core: 2 Hits
- resistor: 2 Hits
- lcd: 2 Hits
- linux_midi: 2 Hits
- pad_4_4: 2 Hits
- easy_cv: 2 Hits
- frailn_ay-3-8912_mini_sale: 2 Hits
- cs1: 2 Hits
- c_from_first_principles: 2 Hits
- seqv4plus_jog: 2 Hits
- mb_olre16: 2 Hits
- wcore_usb: 2 Hits
- compliant: 2 Hits
- home:project:mb808: 2 Hits
- tm5-gateinput: 2 Hits
- protodeck: 2 Hits
- encoders: 2 Hits
- mididocs:midibox_seq_v4: 2 Hits
- midiboxfx_-_midifiying_analog_gear: 2 Hits
- switch: 1 Hits
- ain_module: 1 Hits
- fantomxr: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- mbhp_genesis_ls: 1 Hits
- fadercore_-_vlr-frontpanel: 1 Hits
- northernlightx: 1 Hits
- ain_4: 1 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- midibox_lc: 1 Hits
- ainser8_module: 1 Hits
- knobs: 1 Hits
- core_module: 1 Hits
- led: 1 Hits
- ainser64_module: 1 Hits
- din_module: 1 Hits
- getting_started_faq: 1 Hits
- din_dout_pintable: 1 Hits
- scratchcontroller: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- home:about:midibox: 1 Hits
- home:about:mbhp_acronyms: 1 Hits
- dictionary:beta: 1 Hits
- wcore_i2c: 1 Hits
- core4disc: 1 Hits
- 16x4blm_pcb: 1 Hits
- tpd_pcb: 1 Hits
- cv1: 1 Hits
- cubase: 1 Hits
- mnmlcore: 1 Hits
- wikify: 1 Hits
- midi_interface_blacklist: 1 Hits
- cc-looper: 1 Hits
- user_projects: 1 Hits
- wcore_midi8: 1 Hits
- seqv4plus_beat_led: 1 Hits
- seq_v4_plus: 1 Hits
- wilba_mb_6582_psuopte: 1 Hits
- mb-lre8x2cs_bulk_order_2014: 1 Hits
- dictionary:bus: 1 Hits
- display_driver: 1 Hits
- mbcv_dindout: 1 Hits
- scs-oled: 1 Hits
- home:skills:troubleshooting:firmware: 1 Hits
- mididocs:seq:launchpadblm: 1 Hits
- default_encoder_assignments: 1 Hits
- midibox_quad_genesis: 1 Hits
- encoder_tables_in_c: 1 Hits
- wilba_mb_6582_parts_bulk_order: 1 Hits
- capacitor: 1 Hits
- qbas: 1 Hits
- home:skills:troubleshooting: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- dougwellington_marquardt_switch_bulk_order: 1 Hits
- findbuddha: 1 Hits
- dip_switch: 1 Hits
- decibel: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- pcb: 1 Hits
- acsim_console_c: 1 Hits
- speakjet_control_overview: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- pga:midichart: 1 Hits
- hex2syx: 1 Hits
- seq_c64_keyboard_mod: 1 Hits
- durisian: 1 Hits
- dougwellington_mb6582_powersupply_bulk_order: 1 Hits
- mb_mixer_pcb_bulk_order: 1 Hits
- gm5x5x5_pcb_bulk_order: 1 Hits
- changing_dout_pins: 1 Hits
- m00dawg: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits
- pga:patches: 1 Hits
- ucdocabstract: 1 Hits
- nils_bulk_terms: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- home:software:linux:mbuntu: 1 Hits
- gm5x5x5_errata: 1 Hits
- dougwellington_mb6582_panels: 1 Hits
- mbhp_acronyms: 1 Hits
- pickit2: 1 Hits
- mididocs:seq:hardwareconfig: 1 Hits
- flo: 1 Hits
- crystals_and_oscillators: 1 Hits
- serial_graphics_tablet: 1 Hits
- stryd_one_preparation: 1 Hits
- howto:dev:libcan: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- pga:stackboards: 1 Hits
- midibox_cv_v1: 1 Hits
- pga:softwareoverview: 1 Hits
- dseq32_matrix: 1 Hits
- mididocs:index: 1 Hits
- mbuntu:mbuntu: 1 Hits
- changing_the_order_of_items_in_menu_pages: 1 Hits
- acsensorizer_02: 1 Hits
- wiki:test_page: 1 Hits
- pga:postconfigsoftware: 1 Hits
- home:mbhp:module:din: 1 Hits
- rfid: 1 Hits
- home:mbhp:module:din_dout_pin_list: 1 Hits
- usb_gm5_module: 1 Hits
- plug-and-play_or_pnp: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- opamp: 1 Hits
- newbie: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- change_id: 1 Hits