Search
You can find the results of your search below.
Results
- wilba_mb_6582_base_pcb_construction_guide: 18 Hits
- ple electronics kits, but might not have soldered these kinds of components before, or know exactly what ... e C64 PSU.
You must decide at the start which of these PSU options you wish to use, as this affects whic... doing it well all along.
I recently came across these guides, which are really well presented:
* http... the entire pad is covered with solder.
* Repeat these steps to solder the other leads of that component
- mididocs:seq:beginners_guide:start: 18 Hits
- is guide (it is likely you'll have four of each). These will be called MIDI IN1 and MIDI OUT1, or just IN... buttons have indicator LEDs associated with them. These LEDs will tell you whether something (out of many... to set their type, length, port and MIDI channel. These settings are made on the EVENT page (MENU + EVENT... k types are Note, Chord, CC and Drum, and each of these types has subtypes based on a combination of maxi
- protodeck: 11 Hits
- iki/doku.php?id=mios|here]] to understand how all these layers go!\\
\\
There are differents parts wh... transistor, resistor ... a big fun!\\
\\
All these modules can be built by ourselves or bought as ki... kefile file.\\
\\
The right way to get all of these file is to go there:\\
[[http://svnmios.midibox... chspecs/midimessages.php#3|Control Changes]].\\
These messages are made with 3 bytes:\\
- the status
- mbqg_fp: 11 Hits
- buttons, LEDs, encoders, etc., and of course all these electronic components themselves
* A bunch of 3... logged in to your MIDIbox Forum account to access these downloads)
[[http://midibox.org/forums/applicati... nted, Diffused) (For some reason I ended up using these only for the yellow LEDs in the commands display ... ll the other clear/white things there, or because these LEDs are closer to yellow than to amber, and the
- wilba_mb_6582_parts_list: 10 Hits
- C18F4685|4|40 pin|
Again I remind you to buy all these IC sockets and solder them all to the PCB, even i... ts, etc.) then refer to other documentation about these options. FYI, the ports on the Core modules //sho... similar sized case), do not solder SIL headers to these pads, the connection to the control surface PCB i... rarily use any DPDT switch until a good supply of these switches is located. **The DPDT rocker switch fro
- frequently_asked_questions_faq: 10 Hits
- isplaying track/instrument/parameter names, since these messages are sent by the host itself. But they al... ard or veroboard, in german "Lochrasterplatine"). These are boards with a lot of pre-made holes ordered i... rfader Driver: 7812) to regulate the voltage. All these components (apart from the transformer or wall ad... be pipelined through the serial interface.
With these values in mind, the so called system tick of MIOS
- wilba_mb_6582: 10 Hits
- _parts_list|MB-6582 Control Surface Parts List]]
These parts work with the 10mm gap between frontpanel and control surface PCB.
Any variation in these parts (or the 10mm gap) will affect the end resul... ink</del>
====== Control Surface Wiring ======
These describe the wiring of the control surface PCB. T... pictured on the rear of the chassis connected?**
These are **not** volume controls. These are for using
- using_pic18f4620: 8 Hits
- not be necessary for most cases of '4620 use, as these components are now available precompiled and pack... n Reference
movff FSR0L, FSR2L //These guys
movf PREINC2, W //Put the... ready in W
movff FSR0L, FSR2L //These guys
movff PREINC2, MIOS_PARAMETER1 //Put th... re using a standard, PIC18F452-based application, these steps should not be necessary. These procedures a
- stuartm_stukontrol: 8 Hits
- nd redo the whole thing with MIDI controls.
While these ideas developed, I also tried to find out what I ... or MB applications, but I kinda liked the feel of these compared to the ALPS "Miniture Fader" (also 60mm)... er
=== ALPS Potentiometers ===
Like the faders, these are a bit more expensive. But I've tested several... l of the ALPS pots.
=== Potentiometer Knobs ===
These are coming from Conrad, as Reichelt does not have
- mb808: 7 Hits
- istors to interface with the digital controller. These AND gates have inputs for 2 signals, called commo... mon trig line could sometimes be high enough that these caps are needed to keep the voltage from sagging.... fy the code in each of the "F" buttons handlers. These can be found starting on line 681 of seq_buttons.... t multiple menu's at once. Now, in order to turn these button presses into additional menu shortcuts the
- home:project:mb808: 7 Hits
- istors to interface with the digital controller. These AND gates have inputs for 2 signals, called commo... mon trig line could sometimes be high enough that these caps are needed to keep the voltage from sagging.... fy the code in each of the "F" buttons handlers. These can be found starting on line 681 of seq_buttons.... t multiple menu's at once. Now, in order to turn these button presses into additional menu shortcuts the
- wilba_mb_6582_control_surface_parts_list: 7 Hits
- d 1/8" nuts, but M3 washers will fit 1/8" bolts). These bolts are glued to the panel underside in the cor... acers), 25x M3x6mm screws, 25x M3 spring washers. These spacers are glued to the panel underside where th... surface PCBs and front panel are designed around these switches. They snap into the PCB holes and are th... different LEDs in the mod matrix to the rest, as these use their own DOUT which is not shared with the o
- pga:buildregbrd: 7 Hits
- nd the negative should read below -8 volts DC. If these tests pass, clean up your wiring and we will go o... six positions C1 to C6, two near each regulator. These can face either way. (not polarized).after solder... nd the four holes between regulators IC2 and IC3. These holes are marked “AG”,”SH”,”CT”, and “DG”. Use th... clippings from the capacitors to join all four of these together. These are the four grounds of the syste
- wickedblade: 6 Hits
- articularly the Pedal Box / Pedal Board projects. These are neat, and very close to what I want, but not ... Ds showing which loops/buffers are activated, but these will be wired in parallel with the relays, so the... more outputs. But I may use specific outputs for these anyway, because I may use separate output registe... onsume 50mW, that makes for a total of 600mW (and these are low-current types!). Translated in current, t
- mb_matrix: 6 Hits
- syntax: 6 Hits
- pedal_box:manual: 6 Hits
- korg_wavedrum_midification: 6 Hits
- lcd: 6 Hits
- home:mbhp:module:lcd: 6 Hits
- mbhp_genesis: 6 Hits
- mios_c_simulator_-_debugger: 6 Hits
- acsensorizer_04: 5 Hits
- electronics_basics: 5 Hits
- troubleshooting: 5 Hits
- wiki:syntax: 5 Hits
- mididocs:seq:usingblm: 5 Hits
- parts_faq: 5 Hits
- bipolar_12v_psu: 5 Hits
- wilba_mb_6582_control_surface_construction_guide: 5 Hits
- seqv4plus_le_mec: 5 Hits
- eclipse: 4 Hits
- home:mbhp:module:din: 4 Hits
- chaos_matrix: 4 Hits
- flo: 4 Hits
- ssm2044_pcb: 4 Hits
- midibox_quad_genesis: 4 Hits
- windows_toolchain_core: 4 Hits
- c_tips_and_tricks_for_pic_programming: 4 Hits
- macos_mios32_toolchain_core: 4 Hits
- pedal_box: 4 Hits
- kicad: 4 Hits
- stryd_one: 4 Hits
- midiboxfx_-_midifiying_analog_gear: 4 Hits
- dougwellington_marquardt_switch_bulk_order: 3 Hits
- midiboxdmx: 3 Hits
- pga:choices: 3 Hits
- wilba_mb_6582_panels: 3 Hits
- wilba_mb_6582_prototype: 3 Hits
- installing_gputils_and_sdcc_on_osx: 3 Hits
- wilba_mb_6582_psuopte: 3 Hits
- midibox_audiomatrix: 3 Hits
- 16x4blm_pcb: 3 Hits
- windows_mios32_toolchain_core: 3 Hits
- albs_waldorf_knob_-_order_no._3: 3 Hits
- pedal_box:pc_editor_manual: 3 Hits
- frailn_ay-3-8912_mini_sale: 3 Hits
- application_development: 3 Hits
- home:skills:troubleshooting: 3 Hits
- midibox_tia: 3 Hits
- albs_waldorf_knob_bulk_order: 3 Hits
- cs1: 3 Hits
- mb-sidr8tr:mb-mtrx_bulk: 3 Hits
- home:skills:tools: 3 Hits
- wcoref4_pcb: 3 Hits
- mididocs:seq:building: 3 Hits
- mididocs:seq:blm16x16_build_guide: 3 Hits
- mididocs:index: 3 Hits
- home:mbhp:module:core: 3 Hits
- home:project: 3 Hits
- pga:preconfigsoftware: 3 Hits
- stryd_one_codeblocks: 3 Hits
- envelope-follower-bissel-based: 3 Hits
- scs_pcb: 3 Hits
- introduction_to_ucapps.de: 3 Hits
- questionable: 2 Hits
- opl3_module_modified: 2 Hits
- nils_bulk_terms: 2 Hits
- pcmcia: 2 Hits
- dougwellington_transformer_bulk_order: 2 Hits
- pga:buildoutbrd: 2 Hits
- mididocs:v4l:midiprocessing: 2 Hits
- emf: 2 Hits
- pickit2: 2 Hits
- c_from_first_principles: 2 Hits
- changing_din_pins: 2 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 2 Hits
- m00dawg: 2 Hits
- forum_netiquette: 2 Hits
- home:project:midi_mapper: 2 Hits
- wiki:test_page: 2 Hits
- wilba_mb_seq_construction_guide: 2 Hits
- din_module: 2 Hits
- home: 2 Hits
- seq_v4l_mk._ii: 2 Hits
- fnp-sid: 2 Hits
- wilba_mb_seq_pcb_bulk_order: 2 Hits
- wcore: 2 Hits
- wilba_mb_seq_parts_guide: 2 Hits
- mcan: 2 Hits
- windows_toolchain_codeblocks: 2 Hits
- m16: 2 Hits
- wikify: 2 Hits
- srio-router: 2 Hits
- triggermatrix: 2 Hits
- tpd_pcb: 2 Hits
- lre5-lcd2: 2 Hits
- mbqg_tb_case: 2 Hits
- led: 2 Hits
- windows_toolchain_notepadplus: 2 Hits
- soldering: 2 Hits
- home:skills:troubleshooting:hardware: 2 Hits
- home:skills:soldering: 2 Hits
- wikify:project: 2 Hits
- how_to_organize_a_bulk_order: 2 Hits
- midibox_pokey: 2 Hits
- encoders: 2 Hits
- midibox_sid_faq: 1 Hits
- midiboxlc: 1 Hits
- john_e._finster: 1 Hits
- midibox64e: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- sysex: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- windows_toolchain_quickstart: 1 Hits
- mb-lre8x2cs_rev4.6: 1 Hits
- installing_gputils_and_sdcc_on_ubuntu_8.04: 1 Hits
- midibox_master_keys: 1 Hits
- home:mbhp:parts: 1 Hits
- midibox_snes_apu: 1 Hits
- pga:inputchoices: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- audiocommander: 1 Hits
- home:skills:basics: 1 Hits
- installing_gputils_and_sdcc_on_debian_linux: 1 Hits
- mios_faq: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- pga:softwareoverview: 1 Hits
- wilba_mb_6582_parts_bulk_order: 1 Hits
- waldorf_knobs_bulk_order_2013: 1 Hits
- albs_waldorf_knobs_2011_bulk_order: 1 Hits
- pic18f4685_8bit_lcd_driver: 1 Hits
- pga:buildchanbrd: 1 Hits
- eusart_bug: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- hardsid.dll: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- fantomxr: 1 Hits
- dseq32_matrix: 1 Hits
- mbhp_acronyms: 1 Hits
- meta_events: 1 Hits
- forum_highlights: 1 Hits
- layout_improvements: 1 Hits
- pga:postconfigsoftware: 1 Hits
- windows_toolchain_svn: 1 Hits
- midibox_seq_quick_reference: 1 Hits
- pga:purpose: 1 Hits
- usb_gm5_module: 1 Hits
- midibox_uc: 1 Hits
- control_surface_troubleshooting: 1 Hits
- peake: 1 Hits
- linux_mios32_toolchain_core: 1 Hits
- home:mbhp:module:aout: 1 Hits
- midibox_speakjet: 1 Hits
- case_and_frontpanels_diy_common_tools: 1 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 1 Hits
- home:project:midibox_fm: 1 Hits
- tos_-_a_tds_controller_blog: 1 Hits
- mb-lre8x2cs_pcb: 1 Hits
- northernlightx: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- midibox_ay_ym_v2: 1 Hits
- mb_visual_metronome: 1 Hits
- stryd_one_preparation: 1 Hits
- electronics_diy_common_tools: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- mbuntu:mbuntu: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- voltage_divider: 1 Hits
- transponder: 1 Hits
- trace: 1 Hits
- speakjet_dev_archive: 1 Hits
- smithy: 1 Hits
- semi-conductor: 1 Hits
- scratchcontroller: 1 Hits
- aout_lc_module: 1 Hits
- rf: 1 Hits
- ssm2164_pcb: 1 Hits
- lre-oled-bar2: 1 Hits
- tm5-housing: 1 Hits
- euro-midi-io: 1 Hits
- triggermatrix4: 1 Hits
- stellax4: 1 Hits
- mb-sidr8tr:start: 1 Hits
- wcore_midi8: 1 Hits
- seqv4plus_jog: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- mbcv_dindout: 1 Hits
- sd_card_module: 1 Hits
- enc_4_4: 1 Hits
- dictionary:binary: 1 Hits
- gm5x5x5: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- dictionary:ascii: 1 Hits
- dictionary:boolean: 1 Hits
- mb-digiroland: 1 Hits
- ain_4: 1 Hits
- ain_module: 1 Hits
- rs-232: 1 Hits
- relay: 1 Hits
- mtbf: 1 Hits
- acmidiprotocol: 1 Hits
- tk_gm5_jaycar_partlist: 1 Hits
- gm5x5x5_pcb_bulk_order: 1 Hits
- waldorf_knobs_bulk_order_april_2013: 1 Hits
- home:skills:references: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- wilba_mb_6582_power_switch_bulk_order: 1 Hits
- pga:patches: 1 Hits
- home:about:mbhp_acronyms: 1 Hits
- home:software:linux:mbuntu: 1 Hits
- dougwellington_alps_type_n_motorfader_bulk_order: 1 Hits
- infrasound: 1 Hits
- ucdocabstract: 1 Hits
- mbseq_panel_gb: 1 Hits
- mb_mixer_pcb_bulk_order: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- pga:configmixer: 1 Hits
- button_overlay: 1 Hits
- home:home: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- gm5x5x5_-_allied_parts_list: 1 Hits
- dougwellington_mb6582_powersupply_bulk_order: 1 Hits
- acsim_console_c: 1 Hits
- perl: 1 Hits
- yagi: 1 Hits
- passive_component: 1 Hits
- non-disclosure_agreement_or_nda: 1 Hits
- menno: 1 Hits
- linux_midi: 1 Hits
- links: 1 Hits
- kernel: 1 Hits
- kartoshka_encoders: 1 Hits
- irq_interrupt_request: 1 Hits
- ic: 1 Hits
- harmonic: 1 Hits
- dielectric: 1 Hits
- glitch: 1 Hits
- frequency: 1 Hits
- fpga: 1 Hits
- findbuddha: 1 Hits
- dtmf: 1 Hits
- dsp: 1 Hits
- dougs_solder_price_survey: 1 Hits
- din: 1 Hits
- digital: 1 Hits
- daughter_board: 1 Hits