MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== TriggerMatrix V4 ======

**REAL:**\\
{{:phatline:tm4-perspektive-l.hd-.jpg?700|}}\\

**CAD-Design:**\\
{{:phatline:TM4-Render-black.jpg?700|}}\\
\\
**Left: Serial Nr1 << >> Right: Prototype**\\
{{:phatline:TM4-V0-V1.jpg?700|}}\\
\\

===== CODE, FIRMWARE =====
**Install [[http://www.ucapps.de/mios_studio.html|MIOS Studio]], connect TM4 via USB, and Start the STUDIO**\\
\\
**1. Upload [[http://www.ucapps.de/mios32/mios32_bootloader_v1_018.zipm|MIOS BOOTLOADER]]**\\
**2. (only needet for Virgin Machines) type following commands into the MIOS-TERMINAL:**\\
  * set lcd_type GLCD_SSD1306_ROTATED\\
  * set lcd_num_x 9\\
  * set lcd_num_y 1\\
  * set lcd_width 128\\
  * set lcd_height 64\\
  * store\\
**3. (for Version Updates) Unzip {{:phatline:TM4.zip|the TM4-Firmware}}, and Upload the TM4.hex**\\
**4. Unconnect USB & Connect the USB again --- finished.**\\
**5. If the Machine is not detected by mios studio, and you already checked the usb-connections, the device or the code is broken, for that on the backside of TM4 is a switch, please set it to "bLOAD", now you can upload new & unbroken codes, dont forget to set it to "normal" back again - after upload new code - else the APP will not boot...**\\

===== BUILD =====

==== BOM, Components, PCBs ====
  * [[http://www.midibox.org/dokuwiki/doku.php?id=mididocs:seq:blm16x16_x&s[]=16x16|BLM16x16x, not longer produced anymore...]]\\
  * [[http://wiki.midibox.org/doku.php?id=stm32f4_module&s[]=core32|CORE32 STM32F4]]\\
  * [[http://ucapps.de/mbhp_midi_io.html|2x  Midi IO]]
  * [[http://www.ucapps.de/mbhp_din.html|DINX4]]
  * [[https://www.reichelt.de/at/de/schiebepotentiometer-stereo-10-kohm-linear-rs60n12-lin10k-p73870.html?&trstct=pos_7&nbc=1|8x 10K Lin, Faders]]
  * [[https://www.reichelt.de/at/de/faderknopf-gerippt-lever-1-weiss-knopf-8x1-2ws-p73944.html?&nbc=1|6x Fader-Knob, BLACK]]
  * [[https://www.reichelt.de/at/de/faderknopf-gerippt-lever-1-weiss-knopf-8x1-2ws-p73944.html?&nbc=1|2x Fader-Knob, WHITE]]
  * [[https://www.reichelt.de/at/de/eingabetaster-schaltspannung-24v-fuer-led-sw-dtl-2-sw-p7248.html?&trstct=vrt_pdn&nbc=1|9x Switches]]
  * [[https://www.mouser.at/ProductDetail/Bourns/PEC16-4015F-S0024?qs=80T3JVN997C8C2pS8mtlBg==|3x Encoder]]
  * [[https://de.aliexpress.com/item/32831561142.html?spm=a2g0s.9042311.0.0.43a34c4dYVZPFq|9x OLED-Displays 128x64px 0,96"]]
  * [[https://www.conrad.at/de/p/toolcraft-to-5449905-sechskantmuttern-m2-din-934-messing-1000-st-1816635.html|108x M2 Nuts]]
  * [[https://www.conrad.at/de/p/toolcraft-to-5430846-linsenzylinderschrauben-m2-10-mm-kreuzschlitz-phillips-iso-7046-stahl-galvanisch-verzinkt-200-st-1810282.html|36x M2 Screws]]
  * [[https://www.reichelt.de/at/de/pfostenbuchse-10-polig-mit-zugentlastung-pfl-10-p14571.html?&trstct=pos_0&nbc=1|20x Crimpable connector, 2x5 Pole]]
  * [[https://www.reichelt.de/at/de/pfostenbuchse-16-polig-mit-zugentlastung-pfl-16-p14573.html?&trstct=pos_0&nbc=1|5x Crimpable connector, 2x8 Pole]]
  * [[https://www.reichelt.de/at/de/flachbandkabel-awg28-26-pol-grau-3m-ring-awg-28-26g-3m-p47644.html?&trstct=vrt_pdn&nbc=1|1x 26Pole Wire]]
  * [[https://www.reichelt.de/at/de/kippschalter-6a-125vac-1x-ein-ein-ms-500a-p13150.html?&trstct=pol_2&nbc=1|1x Boot-Switch for Bootload-Mod]]
  * [[https://www.midiphy.com/en/shop-details/184/20/5pcs-dk16-190v3-knob-transparent-|3x Encoder Knob]]
  * Full Sized SD-CARD, which is not Hi-Capacity, eg take 4 or 8GB Cards!\\
  * 2x Wood: 15 x 400 x 39mm, or > 16 x 400 x 39mm (39mm is minimal, i took 40mm...)
  * 1x Wood: 15 x 335 x 39mm, or > 16 x 333 x 39mm (39mm is minimal, i took 40mm...)
  * 3mm Alu Plates for Ground and Backpanel (you cut and drill it by your own)
  * 3mm Alu Frontpanel, CNC-machined (See DXF-File for more info)


===== MODs =====

==== Stable USB-Type-B - Mod ====
{{:phatline:TM4-USB-TYPE-B-MOD.jpg?400|}}\

====Pictured Doku====
**BLM16x16**\\
{{:phatline:TM4-Virgin-Panel.jpg?400|}}\
{{:phatline:TM4-BLM-Rubber.jpg?400|}}\
{{:phatline:TM4-BLM-PCB.jpg?400|}}\
{{:phatline:TM4-BLM-Rubberfull.jpg?400|}}\
{{:phatline:TM4-BLM-Mask.jpg?400|}}\
{{:phatline:TM4-Backpanel-Mounts.jpg?400|}}\\
**Code-Block**\\
{{:phatline:TM4-Code-Block-Mod.jpg?400|}}\
{{:phatline:TM4-Code-Block-Mount.jpg?400|}}\
{{:phatline:TM4-Faders.jpg?400|}}\\
{{:phatline:TM4-Code-Block-finish.jpg?400|}}\\
**Labels:**\\
{{:phatline:TM4-Clean.jpg?400|}}\
{{:phatline:TM4-Labels.jpg?400|}}\
{{:phatline:TM4-Labels-pinzette.jpg?400|}}\
{{:phatline:TM4-Labeled.jpg?400|}}\\
**Wires:**\\
{{:phatline:TM4-Wire-Fader-Detail.jpg?400|}}
{{:phatline:TM4-Wires.jpg?400|}}
{{:phatline:TM4-Wired.jpg?400|}}
\\
**Wood-Elements:**\\
15mm "hard-Wood", i use BEECH, let it cut by your local hardwarestore...\\
{{:phatline:TM4-Woods-measures.jpg?700|}}\\
{{:phatline:TM4-Woods-paint.jpg?700|}}\\
{{:phatline:TM4-Wood-Mount.jpg?700|}}\\

**Screws:**\\
{{:phatline:TM4-PCB-Spacer.jpg?700|}}\\
{{:phatline:TM4-M2-Nuts.jpg?700|}}\\

\\
**DIY-Back-Panel:**\\
3mm Aluminium Plate\\
{{:phatline:TM4-backpanel-measurement.jpg?700|}}\\
{{:phatline:TM4-backpanel-tools.jpg?700|}}\\

===== Features =====
**Short spoken:**\\
  * 16xdrumtriggers > Trigger-Routing-Matrix > Drum-Syntesizers\\
  * 5x Poly Melody-lines > Trigger-Routing-Matrix > Melody-Syntesizers (track 1-5)\\
  * 7x Mono Melody-lines > Trigger-Routing-Matrix > Melody-Syntesizers/Pitachable Drums (track 6-12)\\
\\
**Rules:**\\
  * Drum-Trigger are Velocity Master > we dont care about the velocity of the Melodys\\
  * There are Songs (ProgramChange), each Song has 8 different Trigger-Routings Presets> these are the Song-Parts\\
  * Each Song has 4 StepSequencer-Variants (Rythms)\\
  * Each Song can Remote up to 6 Melody Scenes (LoopA-compatible!)\\
  * 256 Songs saved on SD-Card, and Load-able while playing \\
  * The Tempo has to be changed by Hand or Midi, it is not saved with the song\\
  * System-Settings, like Ports or MidiChannels are Hardcodet, but there will be a sys-menue in near future\\
  * Triggermatrix midi-outs are connected to all synths, so it manage the program-change also\\
  * 16x Trigger-OUTs with fixed Notes, on one midichannel   - to connect Drum-Synths, Drum-Samplers\\
  * 5x  Polyphonic Melody-Retrigger-OUTs on 5 MidiChannels  - to connect MelodySynths to it\\
  * 7x Monophonic Melody-Retrigger-OUTs on 7 MidiChannels - to connect Monophonic Synths like pitchable Drums or Bass-Synths FIXME - i think 1-5 is poly the rest is mono!\\
  * All 16 Trigger & ReTrigger-OUTs share the same Routing and Channelstrip UI (Mute, Solo, Roll...)\\
  * Trigger, Poly, Mono-OUTs can be controlled seperatly by > **Random-Kill** & **Velocity-OFFSet**\\
  * 5x16 Melody-Input-Matrix - Route & Mix Melody Inputs to the 16 Melody-Retrigger-Outs (saved in Song)\\
  * 16x Melody-Input-Matrix-Hold-Buttons - hold the last Note, save it in the Patch - usefull when pitch drums.\\
\\
the Matrix has also a Trigger-Sequencer built in, the Melodys have to come from anywhere else, but @ the end, they have to be plugged into the matrix...\\
**Trigger-sequencer, a few facts:**\\
  * is a Drum-Step-Sequencer\\
  * 256 Steps in total\\
  * 32 th fixed rate\\
  * 3,4,5,7,11,13/4 tact\\
  * minimal LoopSection is 16steps = 1 Page, there are 16 pages to chain\\
  * intro LoopSection, from step 0 until to the "minimal LoopSection"- is played once, then it loops the normal LoopSection\\
  * The sequencer is made to give a static NoteStream, the Song-Structure is done LIVE by the TriggerMatrix-ROUTER\\
  * Full Velocity control, visible with 3 different colours, Velocity Set via FADER\\
  * Free programmable Swing to each Step, with 2 different swing Length-sets, which are controlled live with encoder\\
  * copy, paste, erase of pages\\
  * copy, paste, erase of rows\\
  * fixed forward play direction\\


===== Community users working on it =====
  * **[[Phatline]]** =  Programming, Documentation, Hardware-Prototype, Testing, Jamin...\\
  * Maxim Anokhin - as first User of TM4 - Serial Nr.1
===== Getting Involved ? =====

Just let a Private message on the forum to user already involved
MIDIbox

User Tools

Site Tools

Page Tools
