Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 64 Hits
- er interface consists of buttons, indicator leds, two LCD displays, and 17 knobs. In this guide the but... ba's frontpanel layout most menus are only one or two button presses away. Some menus/functions have th... }}]]
On the left side of the frontpanel there's two groups of buttons which deserve special mention. ... yers, except on drum tracks, where the maximum is two.
In a new session, parameter layer button A sele
- mcan: 19 Hits
- cially to waste time and lose inspiration between two takes.
For Audio, no problem, I've got a good and very large patchbay.
For MIDI I've got two MIDITimePiece units, they are enough for a music ... </wrap> </wrap> \\
\\
==== The Buss ====
There's two ways to connect the nodes on the buss:\\
**A sin... is the smartest part of CAN \\
What happens when two or more nodes attempt to transmit at the same tim
- mbhp_genesis: 15 Hits
- ns
* Filter cutoff frequency selectable between two options (unfiltered or Mega Drive Model 1 mode), ... es 5V inputs (as CORE_STM32F4 does). However, for two or more boards, due to fanout, an external level ... - On board 2, don't stuff U3 or C3, but connect two wires on the top of the board, one from U3:13 to ... from U3:12 to J3:1. They should follow the first two angled lines on the footprint for J3 under U3.
- mbqg_fp: 13 Hits
- rews.
===== Aluminum Front Panel =====
There are two designs available here: my original, and a modifi... ===
This is the set of parts I used to build the two MIDIbox Quad Genesis units I constructed. It can ... preference, though you should always use the same two colors beneath all bi-color buttons. Please plan ... ed with e.g. an encoder and 16 LEDs, or a button, two LEDs, and a diode. This is why they're marked "A2
- frequently_asked_questions_faq: 13 Hits
- . One way to explain them is using the analogy of two buttons. With an encoder, when you turn it to the... parameter up and down. Note that an encoder needs two pins on the DIN Module, one for "up" and one for ... vice ID? **
In common MIOS applications there are two different IDs: the MIOS ID which addresses the co... //www.ucapps.de/mbhp_usb.html|MBHP_USB]] provides two MIDI In and two MIDI Out ports, but due to M$ dri
- midibox_tia: 12 Hits
- essor.\\
When I started this project, there were two main structures of a MIDIbox, SEQ or SYNTH orient... data lines 6 and 7 while the 02 clock is high.\\
Two (2) independent audio generating circuits are inc... Audio Circuit ====
=== Synthesis: ===
There are two audio circuits for generating sound. They are ide... t for each voice (pin 12 & 13).\\
In General, the two voices are added to the same output (pin 13), pin
- wiki:syntax: 11 Hits
- orce a newline** without a paragraph, you can use two backslashes followed by a whitespace or the end o... is some text with some linebreaks\\ Note that the
two backslashes are only recognized at the end of a l... some text with some linebreaks\\ Note that the
two backslashes are only recognized at the end of a l... lists. To create a list item, indent your text by two spaces and use a ''*'' for unordered lists or a '
- wilba_mb_6582_base_pcb_construction_guide: 11 Hits
- tage regulator on each SID module, there are just two (one 9v and one 12v).
* **PSU Option C:** Uses ... and B use the same parts except option B requires two extra voltage regulators, part V2 (7809) and part... t into the joint. Unfortunately, people only have two. There are a few techniques which I use to compen... hing the component to the PCB so you can then use two hands to solder the other joints while the compon
- wilba_mb_seq_construction_guide: 10 Hits
- all in, except S19,S33,S26,S40, to leave room for two clamps.
Place the PCBs onto the studs. Observe that the two halves can join with alignment between pads on ei... edge and concentrate on the alignment between the two pads for the Beat LED, and that the studs are in ... tween the entire spacer "base" and the panel. Use two wooden skewer sticks to put the blobs onto the pa
- syntax: 9 Hits
- orce a newline** without a paragraph, you can use two backslashes followed by a whitespace or the end o... is some text with some linebreaks\\ Note that the
two backslashes are only recognized at the end of a l... some text with some linebreaks\\ Note that the
two backslashes are only recognized at the end of a l... lists. To create a list item, indent your text by two spaces and use a ''*'' for unordered lists or a '
- pga:buildoutbrd: 9 Hits
- Building the Output Board:\\
The output board has two purposes. It provides 1 to 4 audio outputs from y... uts:\\
Depending on your board, you may need only two outputs (line mixer) or all four for a “full” mix... hree are just like it.\\
From left to right, the two pins marked – 1 + are the output pins. Balanced o... ish. Next to those are three resistors. The first two will be 1K if you want balanced outputs, or just
- midibox_sid_faq: 8 Hits
- o 4 cores, (with each core capable of controlling two SIDs), allowing you to have up to 8 SID audio cha... ct isn't really so interesting. If you are having two identical SIDs, then the volume will just be doub... use common synths mostly don't provide 6 LFOs and two envelopes for a mono voice, they provide seperate... ried sweeping the SID's resonance? :) It's just a two-pole filter. You'll be much more successful with
- mb_matrix: 8 Hits
- an also load and save "patches" and configure the two mergers. The lower row of buttons doesn't do anyt... nces between matrix and BOBs should be possible.
Two BOBs each connect to a single I/O board, which do... nt will fit here as well!
Most DIN sockets have two little holes on the bottom side which can be used... he STM32F4 core board.** A single BOB can replace two I/O boards. The only additional thing required fo
- wilba_mb_6582_prototype: 8 Hits
- art_bug|EUSART bug]]. Then I decided I should put two in, since I liked the idea of a separate MIDI channel to the slaves.
In the end, I've created two PCBs, one for the base of the case for the PICs a... are for V2. The idea is that one Core can control two SID modules where the SID modules share all the c... * mounts for the 4x20 PLED display
There's also two small PCBs with switches and LEDs mounted on them
- korg_wavedrum_midification: 7 Hits
- scratchcontroller: 7 Hits
- wilba_mb_6582_psuopte: 7 Hits
- apparat_20_construction_blog: 7 Hits
- seqv4plus_le_mec: 7 Hits
- lucem: 7 Hits
- mididocs:seq:launchpadblm: 6 Hits
- wilba_mb_6582: 6 Hits
- using_pic18f4620: 6 Hits
- midibox_quad_genesis: 6 Hits
- make_encoders_out_of_your_mouse: 6 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 6 Hits
- bipolar_12v_psu: 6 Hits
- chaos_matrix: 6 Hits
- mb_2069: 5 Hits
- questionable: 5 Hits
- electronics_basics: 5 Hits
- introduction_to_ucapps.de: 5 Hits
- troubleshooting: 5 Hits
- aout_ng: 5 Hits
- arkade: 5 Hits
- fnp-sid: 5 Hits
- din: 4 Hits
- midi_specification: 4 Hits
- seqv4plus_enc-plate: 4 Hits
- mididocs:seq:building: 4 Hits
- home:mbhp:module:aout_ng: 4 Hits
- pga:buildregbrd: 4 Hits
- opamp: 4 Hits
- midibox_snes_apu: 4 Hits
- tpd_pcb: 4 Hits
- home:mbhp:module:din: 4 Hits
- flo: 4 Hits
- m16: 4 Hits
- midibox_audiomatrix: 4 Hits
- pga:preconfigsoftware: 3 Hits
- home:mbhp:module:core: 3 Hits
- ssm2044_pcb: 3 Hits
- home:skills:etching_pcbs: 3 Hits
- decibel: 3 Hits
- series: 3 Hits
- encoders: 3 Hits
- lcd: 3 Hits
- home:skills:troubleshooting:hardware: 3 Hits
- wiki:test_page: 3 Hits
- parallel: 3 Hits
- home:mbhp:module:lcd: 3 Hits
- howto_create_a_pcb_english_german: 3 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 3 Hits
- mb-lre8x2cs_pcb: 3 Hits
- ssm2164_getting_started: 3 Hits
- mb-lre8x2cs_pcb_bulk_order: 3 Hits
- dictionary:binary: 3 Hits
- acsensorizer_04: 3 Hits
- elo: 3 Hits
- seq_v4l_mk._ii: 3 Hits
- mbhp_genesis_ls: 3 Hits
- din_module: 3 Hits
- wcore: 3 Hits
- ain_module: 3 Hits
- dictionary:attenuation: 3 Hits
- fantomxr: 3 Hits
- wilba_mb_6582_control_surface_construction_guide: 3 Hits
- interpreter: 2 Hits
- aout_4: 2 Hits
- mididocs:v4l:midiprocessing: 2 Hits
- voltage_divider: 2 Hits
- windows_toolchain_core: 2 Hits
- seqv4plus_beat_led: 2 Hits
- midiboxmixer: 2 Hits
- home:project:mb808: 2 Hits
- pga:choices: 2 Hits
- home:skills:troubleshooting: 2 Hits
- home:mbhp:module:opl3: 2 Hits
- handshake: 2 Hits
- mb-sidr8tr:start: 2 Hits
- ultracore: 2 Hits
- acsensorizer_02: 2 Hits
- seqv4plus_jog: 2 Hits
- seq_c64_keyboard_mod: 2 Hits
- dougwellington_mb6582_panels: 2 Hits
- wcore_midi8: 2 Hits
- switch: 2 Hits
- tos_-_a_tds_controller_blog: 2 Hits
- mb-lre8x2cs_rev4.6: 2 Hits
- wilba_midibox_rc: 2 Hits
- mididoc:midibox_cv_v2: 2 Hits
- soundcards_with_ymf262_and_or_yac512_chips: 2 Hits
- trsequencer: 2 Hits
- windows_toolchain_svn: 2 Hits
- parts_faq: 2 Hits
- capacitor: 2 Hits
- diode: 2 Hits
- stuartm_stukontrol: 2 Hits
- speakjet_breadboard_construction: 2 Hits
- wild_weasel: 2 Hits
- opl3_module_modified: 2 Hits
- dictionary:byte: 2 Hits
- mididocs:seq:blm16x16_x: 2 Hits
- mb808: 2 Hits
- dcb: 1 Hits
- dseq_bs: 1 Hits
- stryd_one: 1 Hits
- cisc: 1 Hits
- celsius: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- midibox_ay_3_8912_envelope: 1 Hits
- cpld: 1 Hits
- windows_mios32_toolchain_core: 1 Hits
- c_tips_and_tricks_for_pic_programming: 1 Hits
- speakjet_application_software_v_0.1: 1 Hits
- layering_the_ui: 1 Hits
- ssm2044_pcb_bulk_order: 1 Hits
- john_e._finster: 1 Hits
- comparator: 1 Hits
- wilba_mb_6582_control_surface_parts_list: 1 Hits
- pga:midichart: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- midiboxmixermanual: 1 Hits
- mios_faq: 1 Hits
- hardsid.dll: 1 Hits
- eusart_bug: 1 Hits
- pga:inputchoices: 1 Hits
- pga:buildchanbrd: 1 Hits
- windows_toolchain_codeblocks: 1 Hits
- wilba_mb_6582_panels: 1 Hits
- pga:stackboards: 1 Hits
- pga:softwareoverview: 1 Hits
- midibox_seq_quick_reference: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- installing_gputils_and_sdcc_on_debian_linux: 1 Hits
- coresound: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- home:skills:soldering: 1 Hits
- mios: 1 Hits
- mb-twinsid: 1 Hits
- user_contest2007: 1 Hits
- subtractor: 1 Hits
- home:skills:troubleshooting:firmware: 1 Hits
- fadercore_-_vlr-case: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- junction: 1 Hits
- seq_buttons: 1 Hits
- midibox_sid: 1 Hits
- ain_4: 1 Hits
- midibox_lc: 1 Hits
- ainser8_module: 1 Hits
- aout_lc_module: 1 Hits
- core_module: 1 Hits
- ainser64_module: 1 Hits
- stm32f4_module: 1 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 1 Hits
- midimasterclock: 1 Hits
- dictionary:boolean: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- midibox_pokey: 1 Hits
- crystals_and_oscillators: 1 Hits
- midibox_speakjet: 1 Hits
- soldering: 1 Hits
- midibox_fm_21: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- sammichfm: 1 Hits
- dictionary:bistable: 1 Hits
- dictionary:antenna: 1 Hits
- zero_wait_state: 1 Hits
- wcore_res-sd: 1 Hits
- 16x4blm_pcb: 1 Hits
- sammichsid: 1 Hits
- scs_pcb: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- user_projects: 1 Hits
- midibox_3396: 1 Hits
- wcore_line-transmit: 1 Hits
- wcore_i2c: 1 Hits
- seq_v4_plus: 1 Hits
- dictionary:bridge: 1 Hits
- dipboardf4: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- dictionary:buffer: 1 Hits
- dictionary:bus: 1 Hits
- cs1: 1 Hits
- enc_4_4: 1 Hits
- dictionary:bios: 1 Hits
- dictionary:bi-directional: 1 Hits
- dictionary:ata: 1 Hits
- home:project:midibox_sid: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- goblinz: 1 Hits
- darlington_pair: 1 Hits
- emf: 1 Hits
- electrode: 1 Hits
- dougs_solder_price_survey: 1 Hits
- dip_switch: 1 Hits
- digital_signal: 1 Hits
- digital: 1 Hits
- differential_amplifier: 1 Hits
- demodulation: 1 Hits
- chip: 1 Hits
- gslug: 1 Hits
- wavelength: 1 Hits
- acmidiprotocol: 1 Hits
- ucdocabstract: 1 Hits
- changing_dout_pins: 1 Hits
- changing_din_pins: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- ultra: 1 Hits
- best_documentation_effort_and_howto_for_total_newbies: 1 Hits
- home:software:picasm: 1 Hits
- exclusive_or: 1 Hits
- hex_or_hexadecimal: 1 Hits
- ucdoctemplate: 1 Hits
- proportional_amplifier: 1 Hits
- tunneling: 1 Hits
- triac: 1 Hits
- transformer: 1 Hits
- temp_template_test: 1 Hits
- stryd_one_codeblocks: 1 Hits
- scsi: 1 Hits
- rs-232: 1 Hits
- rf: 1 Hits
- pld: 1 Hits
- yagi: 1 Hits
- pio: 1 Hits
- phototransistor: 1 Hits
- pcmcia: 1 Hits
- nebula_bulk_orders_rean: 1 Hits
- multivibrator: 1 Hits
- memory: 1 Hits
- ks0108: 1 Hits
- irq_interrupt_request: 1 Hits
- irda: 1 Hits
- midibox_sd_card_sample_player: 1 Hits