MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Menu Button as Shift button ======
If you had an old mbSIDv1 with a CS Step A (5 select button, 1 rotary, and 1 menu button) and you have upgrade it to v2, you can simply have the useful Shift function on menu button when the main menu is displayed. 
===== Step-by-Step description =====
  * Open cs_menu_button.inc, it's located in src directory of midibox_sid_v2_0_rcXX.
  * Find this function CS_MENU_BUTTON_Exec_NoStartup. It's just under CS_MENU_BUTTON_Exec.
  * Add this lines:<code asm>	;; special condition if main menu displayed and menu button pressed, go to shif function
	btfsc	CS_MENU, 7
	goto	CS_MENU_BUTTON_Shift</code>

  * like shown here:<code asm>CS_MENU_BUTTON_Exec_NoStartup
	;; activate/deactivate menu button function
	bcf	CS_MENU_MODE, CS_MENU_MODE_MENU_PRESSED
	btfss	MIOS_PARAMETER2, 0; if button is pressed
	bsf	CS_MENU_MODE, CS_MENU_MODE_MENU_PRESSED

	;; special condition if main menu displayed and menu button pressed, go to shif function
	btfsc	CS_MENU, 7
	goto	CS_MENU_BUTTON_Shift

	;; do nothing if button has been depressed
	btfsc	MIOS_PARAMETER2, 0
	return</code>
  * Open cs_menu.inc
  * Find this function CS_MENU_Exec
  * Comment this lines to avoid conflict with the previous code insert:<code asm>	;; exit if we are in main menu
	btfsc	CS_MENU, 7
	return</code>
  * like shown here:<code asm>CS_MENU_Exec
	;; exit if SID not available
	btfss	CS_STAT, CS_STAT_SID_AVAILABLE
	return

	;; clear CS_SELECT_CTR (so that new message appears immediately)
	clrf	CS_SELECT_CTR

	;; clear refresh item counter --- ensures that the whole display will be refreshed
	clrf	CS_MENU_REFRESH_ITEM_CTR

	;; exit if we are in main menu
	;; btfsc	CS_MENU, 7
	;; return

	;; execute function
	;; calc pointer to function: CS_MENU_TABLES + (CS_MENU*CS_MENU_T_ENTRY_LEN) + CS_MENU_ENTRY_EXEC_OFFSET
	movlw	CS_MENU_T_ENTRY_EXEC_OFFSET
	call	CS_MENU_GetMenuTablesPtr
	goto	MIOS_HLP_IndirectJump</code>
    * Now recompile the setup_*.asm
    * Send it to your mbSID via MIOSStudio
    * You’re all done!
===== Advertisement  =====
In this way the encoder slow function pressing shift (menu) button work only if you are in main menu, and than turn any CS encoder.
Since turning encoder jump the lcd to the referred parameter's menu, the slow function remain set-on since you come back to main menu.
The slow encoder speed, pushing shift after (during) the encoder movement do not work.
MIDIbox

User Tools

Site Tools

Page Tools
