Search
You can find the results of your search below.
Results
- introduction_to_ucapps.de: 22 Hits
- on Wiki======
//FIXME : Update things since it's very outdated//
The goal of this article is to provid... (EEPROM)
* A wide range of LCDs can be used
* Very modular design: You´re able to run a wide variety... no buttons or encoders or LCD), but this would be very difficult to control ( ;D )
<sup>3</sup> MidiBox... oders and buttons (changeable in some ways)
This very cool analog-style sequencer is perfect for progra
- protodeck: 13 Hits
- p/buy.html|Tim/smashTV]] :: the guy who makes the very best/reliablest/cheapest midibox modules in the w... \\
I chose the midibox framework because it is VERY reliable, well documented, it contains a lot of s... or each thing, it is the same connector and it is very easy to find self-crimping 2x5 connector part!\\ ... C_%28programming_language%29|C]] only. There is a very basic but powerful [[http://www.midibox.org/dokuw
- midiboxdmx: 12 Hits
- sed in an old Strand Tempus 2-12 case (I bought 4 very cheap!).
{{:midiboxdmx:mbdmx-boxed.jpg|}}
====... rofessional lighting desks which apart from their very high costs, are very unfriendly to use. I may discover during the development why this is the case? I h... s which are basically boxes with a few faders and very little intelligence.
I hope to develop something
- home:mbhp:parts: 10 Hits
- h.com/buy.html|Bourns encoders]] (detented type - very good quality, fast delivery!) at [[http://mbhp.av... oducten.html#M-SW-ROT|M-SW-ROT]] (detented type - very good quality, very fair price, fast delivery!) at [[http://www.voti.nl|Voti]] (NL) for around 1.20 Euro... [[http://www.voti.nl/shop/index.html|English]]) - Very fair prices and low shipping costs for special pa
- mididocs:seq:beginners_guide:start: 9 Hits
- wo tracks in Group 1 (i.e. G1T1 and G1T2). At the very least you need to set their type, length, port an... g. for tracks which play chords that don't change very often. For example, if your "chord track" is 64 s... thin that step (a kind of flam). This allows only very simple rolls. For more detailed control over the ... ity of the live pattern, press the controller key very softly, and then use only aftertouch to control t
- wickedblade: 8 Hits
- ng (i.e. making) the project. The final design is very close to what I'm describing here, but not entire... at I need, and the things that somewhat do it are very expensive, I thought, why not do it myself, and h... l Box / Pedal Board projects. These are neat, and very close to what I want, but not quite it, so here i... m paired vertically (send on top of return) isn't very nice and not easy to handle, I think, so I'm goin
- frequently_asked_questions_faq: 8 Hits
- ting the ICs. Furthermore a socket for the PIC is very helpful to be sure it won't get damaged while sol... rce code or via SysEx dumps (if supported). It is very useful to have an LCD that can be plugged into th... und a guy who practise a private PCB service with very good prices for hobbyists: [[http://www.mikes-ele... e.html|MBHP_CORE]] module.
*Update:* TK: "I made very good experiences with a switching PSU from Pollin
- application_development: 7 Hits
- tom applications for [[MIOS]]-driven Pic-Chips is very easy and straightforward:
{{http://www.audiocomm... IOS, you just have to learn the C-Syntax which is very easy. If you ever programmed in any other (also s... sary. But be aware: the learning curve for ASM is very steep, and if you don't need to squeeze out the very last mililisecond or spare another byte, __it is r
- where_to_order_components: 7 Hits
- [[http://www.voti.nl/shop/index.html|English]]) - Very fair prices and low shipping costs for special pa... re to check other stores as well. Generally ships very fast (at least to Texas)
* [[http://www.digikey... ]
* [[http://www.bgmicro.com|B.G.Micro (US)]] - Very inexpensive LCDs, and a whole lot of other electr... ] - LCDs
* [[http://www.mpja.com/|MPJA (US)]] - Very cheap 100-packs of LCDs. Also has knobs, cheap vo
- ssm2044_pcb: 6 Hits
- oject for absolute beginners. The soldering isn't very difficult, but you will need either an AOUT_NG (S... it distorted because of clipping ;-) )
TK made a very nice audio demo, too: [[http://www.midibox.org/fo... lter similar to e.g. the CEM3378/79. The sound is very rich and expressive (you heard the demos, right?)... eter or DAC, the usable range of control input is very limited, i.e. the lower third of values doesn't c
- mcan: 6 Hits
- akes.
For Audio, no problem, I've got a good and very large patchbay.
For MIDI I've got two MIDITimePie... odes are in parallel over the buss.\\
This allows very long cabling, some hundred meters can be achieved... intended for a particular device. This should be very useful to avoid useless software processing--Core... ing/size and Sysex packaging. This two fields are very useful.\\
\\
The **cable** allows to get up to **
- john_e._finster: 5 Hits
- o constantly resolder the tracks because they are very brittle and break every time the pcb gets bent ju... is was easier said then done! The pcb material is very sturdy and it took a small drill, a pair of nippe... Mackie Clone. Both are made out of beech wood, a very dense and firm wood, which can be worked with (cut, sanded, drilled into,...) very easily if one has the right tools like a sharp (!
- apparat_20_construction_blog: 5 Hits
- h such a small capsule in it, the handset makes a very hollow-sounding cave and is very sensitive to feedback. Glueing the capsule directly behind the grid is also no good because the mic gets very susceptible to pops and breath. So I took the pla... oder bypass. The debouncing of the buttons is not very good on the alesis, so it happens quite often tha
- wilba_mb_6582_control_surface_construction_guide: 5 Hits
- .. the threaded spacers that go next to these are very close, so check for clearance.**
insert some swi... together.
Turn the PCB/panel panel face down on VERY FLAT SURFACE. I use the front panel that comes with the PT-10 case, this is very flat, and you can rotate it to see the gap around... he **inside** of the bent cable. This makes for a very strong connection with little stress on the solde
- aout_ng: 4 Hits
- home:skills:etching_pcbs: 4 Hits
- howto_create_a_pcb_english_german: 4 Hits
- mb-sidr8tr:start: 4 Hits
- northernlightx: 4 Hits
- home:mbhp:module:aout_ng: 4 Hits
- home:project:midibox_sid:tb303_mode: 3 Hits
- home:skills:troubleshooting: 3 Hits
- troubleshooting_lcd_displays: 3 Hits
- stuartm_stukontrol: 3 Hits
- durisian: 3 Hits
- home:project:midibox_sid_tb303_mode: 3 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 3 Hits
- elektor_vocoder: 3 Hits
- troubleshooting: 3 Hits
- pedal_box: 3 Hits
- midibox_sid_faq: 3 Hits
- lucem: 3 Hits
- midibox_sid_tb303_mode: 3 Hits
- korg_wavedrum_midification: 3 Hits
- mididocs:seq:building: 3 Hits
- make_encoders_out_of_your_mouse: 3 Hits
- home:mbhp:make_encoders_out_of_your_mouse: 3 Hits
- risc: 2 Hits
- wilba_mb_6582_base_pcb_construction_guide: 2 Hits
- relay: 2 Hits
- wilba_mb_6582_prototype: 2 Hits
- midibox_8x8_standalone_matrix: 2 Hits
- midi_specification: 2 Hits
- sag: 2 Hits
- martinsomerville: 2 Hits
- live: 2 Hits
- ic: 2 Hits
- yagi: 2 Hits
- how_to_setup_xcode3_to_access_the_svn_server: 2 Hits
- wilba_mb_6582_control_surface_parts_list: 2 Hits
- ultracore: 2 Hits
- howto:dev:autotools-skeleton: 2 Hits
- mb-lre8x2cs_pcb_bulk_order: 2 Hits
- windows_toolchain_svn: 2 Hits
- bipolar_12v_psu: 2 Hits
- mb-lre8x2cs_rev4.6: 2 Hits
- home:skills:soldering: 2 Hits
- mb808: 2 Hits
- stryd_one: 2 Hits
- hardsid.dll: 2 Hits
- home:mbhp:module:din: 2 Hits
- pga:buildchanbrd: 2 Hits
- spike: 2 Hits
- mbqg_fp: 2 Hits
- dougs_solder_price_survey: 2 Hits
- soldering: 2 Hits
- wcore_res-sd: 2 Hits
- seqv4plus_le_mec: 2 Hits
- dipboardf4: 2 Hits
- mb_2069: 2 Hits
- stm32f4_module: 2 Hits
- antixfm: 2 Hits
- arkade: 2 Hits
- din_module: 2 Hits
- wiki:test_page: 2 Hits
- mios_faq: 1 Hits
- wilba_mb_seq_construction_guide: 1 Hits
- home:mbhp:module:core: 1 Hits
- home:mbhp:module:core32: 1 Hits
- home:about:midibox: 1 Hits
- serial: 1 Hits
- ju_control_roland_alpha_juno_control_panel_cs: 1 Hits
- book_reviews: 1 Hits
- pga:inputchoices: 1 Hits
- eclipse: 1 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- oem: 1 Hits
- ssm2164_pcb: 1 Hits
- using_pic18f4620: 1 Hits
- home:mbhp:module:lcd: 1 Hits
- mbhp_genesis_ls: 1 Hits
- circuit_designs: 1 Hits
- windows_toolchain_core: 1 Hits
- flo: 1 Hits
- easy_cv: 1 Hits
- midibox_speakjet_k64_modul: 1 Hits
- ain_4: 1 Hits
- integrated_circuit: 1 Hits
- pga:purpose: 1 Hits
- ssm2164_getting_started: 1 Hits
- pga:buildoutbrd: 1 Hits
- layout_improvements: 1 Hits
- windows_mios32_toolchain_core: 1 Hits
- phatline: 1 Hits
- midibox_snes_apu: 1 Hits
- wilba_6582a_sid_mega_sale: 1 Hits
- cubase: 1 Hits
- mbhp_genesis: 1 Hits
- 16x4blm_pcb: 1 Hits
- sammichsid: 1 Hits
- fnp-sid: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- stryd_one_codeblocks: 1 Hits
- cv1: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- wilba_mb_6582: 1 Hits
- mios_c_simulator_-_debugger: 1 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 1 Hits
- mb_olre16: 1 Hits
- thermistor: 1 Hits
- wcore_usb: 1 Hits
- eusart_bug: 1 Hits
- midibox_audiomatrix: 1 Hits
- pga:choices: 1 Hits
- aout_lc_module: 1 Hits
- mil: 1 Hits
- installing_gputils_and_sdcc_on_osx: 1 Hits
- mb-lre8x2cs_pcb: 1 Hits
- ucdocabstract: 1 Hits
- cmos: 1 Hits
- home:project:mb808: 1 Hits
- parts_faq: 1 Hits
- transistor: 1 Hits
- bosone: 1 Hits
- c_from_first_principles: 1 Hits
- continuity: 1 Hits
- forum_netiquette: 1 Hits
- open_source_projects: 1 Hits
- gain: 1 Hits
- henry: 1 Hits
- resistor: 1 Hits
- mb_visual_metronome: 1 Hits
- irda: 1 Hits
- jackchaos: 1 Hits
- links: 1 Hits
- midibox_pokey: 1 Hits
- drumstuff: 1 Hits
- perl: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- dj3nk: 1 Hits
- core_module: 1 Hits
- stryd_one_preparation: 1 Hits
- seq4_aluminium_case_and_frontpanel_2014: 1 Hits
- acsensorizer_02: 1 Hits
- midibox_seq: 1 Hits
- transformer: 1 Hits
- control_surface_troubleshooting: 1 Hits
- user_contest2007: 1 Hits
- lcd: 1 Hits
- scs_module: 1 Hits
- home:skills:tools: 1 Hits
- freecad: 1 Hits
- albs_waldorf_knob_bulk_order: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- scratchcontroller: 1 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 1 Hits
- pcd8544: 1 Hits
- ssm2044_pcb_bulk_order: 1 Hits
- audiocommander: 1 Hits
- wilba_midibox_rc: 1 Hits
- acsim_console_h: 1 Hits
- do_it_yourself: 1 Hits
- phunk: 1 Hits
- albs_waldorf_knob_-_order_no._3: 1 Hits
- vhf: 1 Hits