User Tools

Site Tools


wcore_line-transmit

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wcore_line-transmit [2017/09/11 22:07]
latigid_on [BOM v1.0]
wcore_line-transmit [2017/09/11 22:09] (current)
latigid_on [Schematic]
Line 7: Line 7:
 [[http://​www.ucapps.de/​mbhp/​mbhp_line_driver_transmitter.pdf|MBHP Transmitter]]. ​ [[http://​www.ucapps.de/​mbhp/​mbhp_line_driver_transmitter.pdf|MBHP Transmitter]]. ​
  
-The two obvious differences are the J3 jumper (disconnects +5V from being sent) and the addition of a 100mil header. This way a DB-25 connector ​(or something else?) with ribbon cable mounting could be mounted ​off-board and connected ​to the line driver with an IDC.+The two obvious differences are the J3 jumper (disconnects +5V from being sent) and the addition of a 100mil header. This way a DB-25 (or something else?) with ribbon cable mounting could be positioned ​off-board and wired to the line driver with an IDC.
  
 ---- ----
wcore_line-transmit.txt ยท Last modified: 2017/09/11 22:09 by latigid_on