Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 25 Hits
- the information is often available on the LCDs as well (most often on the left edge of the left LCD).
Y... ll automatically set the correct layer numbers as well. Initialise the track by pressing GPB16 for a few... n wheel at that step. CCs can be recorded live as well. (See section 4.1.4. for details.)//
Note that y... . If you punched in the notes on the right LCD as well (like you did with G1T1), it does no harm, but th
- wiki:syntax: 9 Hits
-
You can mark something as <del>deleted</del> as well.
You can mark something as <del>deleted</del> as well.
**Paragraphs** are created from blank lines. If... ply www.google.com - You can set the link text as well: [[http://www.google.com|This Link points to goog... imply www.google.com - You can set
link text as well: [[http://www.google.com|This Link points to goog
- home:software:windows:word2doku: 8 Hits
- links yourself after pasting)
* May not work well with documents that have highly customized styles... to markup newline characters (prevents a loop, as well)
If Not .Text = ... to markup newline characters (prevents a loop, as well)
If Not .Text = vbCr Then
... to markup newline characters (prevents a loop, as well)
If Not .Text = vbCr Then
- stryd_one_word2doku: 8 Hits
- links yourself after pasting)
* May not work well with documents that have highly customized styles... to markup newline characters (prevents a loop, as well)
If Not .Text = ... to markup newline characters (prevents a loop, as well)
If Not .Text = vbCr Then
... to markup newline characters (prevents a loop, as well)
If Not .Text = vbCr Then
- mididocs:seq:building: 8 Hits
- build. If you're building a SEQ now, you may as well use the STM32F4 core.
The SEQ's core is connecte... lays, cables to connect the PCBs and the LCDs, as well as the parts required to populate the Core and Fr... com|eBay]] can be good sources for cheap parts as well.
===MIDIbox-shop.com===
[[http://midibox-shop.c... nd he offers some commonly used parts for sale as well (like MIDI jacks, IDC connectors, LEDs, Encoders,
- soldering: 7 Hits
- with more pictures at least//
===== Soldering well =====
A quote from [[http://www.elecraft.com/Tec... Solder.html|Ask Dr. Solder]] sums things up quite well:
\\
//**Q: How long should it take to make a "go... t being experienced in soldering. Applying a lot (well, too much) of heat will cause the pads to detach ... Yes, you can get the pads off with solder wick as well if you start rubbing it against the joint, but in
- user_contest2007: 7 Hits
- a MIDIbox LC ;-)
Of course your box have to work well...
4) [[Best DIY-looking MIDIbox]]--------------... , Case you build from A to Z.
The electronics as well as the final outside design will be take into acc... right place for you.
It's about the outside as well as the inside and the docs (or "datasheets" ;-) )... ryone...
You have to prove that your design work well.
9) [[Most Freaky internal wiring]]-------------
- mb-sidr8tr:start: 7 Hits
- 14#entry134614|post]] relating to this project as well.
{{:mb-sidr8tr:front-panel-rev2.png?640|}}
{{:m... a normal CORE); or to use a modular approach, as well as anything in between. Wiring all the parts toge... re. It's very very easy to do, however - it's all well documented in the MBSID source code.
==== Contro... l power option could be used for the rackmount as well.
You can order the bareboard [[https://oshpark.c
- tos_-_a_tds_controller_blog: 6 Hits
- eauty of it all. Since I'm good with electronics (well...better than many) & computers I've decided to m... 12 and -12 volts output and I thought to myself, "Well, that should be enough...". It was enough but it ... ed to swap data lines with control/voltage lines, well, dont! I did(unintentionally) and the result is f... ght (too tight or too wide) \\
- printed layer is well printed but some glyphs are a bit off and it does
- wilba_mb_6582_base_pcb_construction_guide: 6 Hits
- switch. Please do not assume this idea will work well, it might introduce noise, hum and heat!//
* **... on about soldering, so you can learn how to do it well, or confirm you've been doing it well all along.
I recently came across these guides, which are really well presented:
* http://www.curiousinventor.com/gui
- questionable: 6 Hits
- ) of the required parts to populate the PCB's, as well as additional odds and ends that you'll probably ... Neutrik/RE-AN (Mouser # 550-77304), and will work well for the vertical faders, but I am looking for a m... ec (POT10K) and are pretty cheap. They've worked well for projects in the past, so I'm hoping that they'll work well for this project as well. The knobs used for the
- home:skills:soldering: 6 Hits
- Solder.html|Ask Dr. Solder]] sums things up quite well:
\\
//**Q: How long should it take to make a "go... t being experienced in soldering. Applying a lot (well, too much) of heat will cause the pads to detach ... Yes, you can get the pads off with solder wick as well if you start rubbing it against the joint, but in... ool and a little solvent (isopropyl alcohol works well). Even tinned/plated boards are filthy - you'd b
- midibox_audiomatrix: 5 Hits
- he AD chip (which has the buffers on-chip)?// \\
Well, I guess that depends on how boutique you want to... :iconinfo.gif}}]]
//**MT88x Crosspoint Switch**//
Well, the MT ones seem to have good crosstalk specs wh... handle. Given that memory is not a concern...\\
Well, the way it's arranged is per-chip. 16 bits are u... h size restrictions, etc. again unity gain)\\
As well as crosspoint matrix boards for\\
MT8816 DIP 40\\
- pedal_box: 5 Hits
- and a display to see patch change / CC names, as well as their values.
It has grown far beyond it's ori... flects the actions of your existing floorboard as well.
**Pedal Board**
<box 253px right round>
{{mcro... s a MIDI Monitor / Processor. Pedal Board is a... well... floorboard.
^ ^ PbX ^ Pb... miliar with compliling 'C' files for MIOS. \\
As well as uploading files to the Core module. See [[http
- wickedblade: 5 Hits
- tpd_pcb: 4 Hits
- stuartm_stukontrol: 4 Hits
- control_surface_troubleshooting: 4 Hits
- midiboxfx_-_midifiying_analog_gear: 4 Hits
- home:about:midibox: 4 Hits
- mb_matrix: 4 Hits
- syntax: 4 Hits
- mididocs:seq:usingblm: 4 Hits
- wilba_mb_6582_control_surface_parts_list: 4 Hits
- where_to_order_components: 3 Hits
- chaos_matrix: 3 Hits
- home:mbhp:parts: 3 Hits
- shortcut_trigger_for_enttec_light_factory: 3 Hits
- wilba_mb_6582_prototype: 3 Hits
- dcb: 3 Hits
- hardsid.dll: 3 Hits
- what_is_a_midibox: 3 Hits
- pedal_box:manual: 3 Hits
- lucem: 3 Hits
- mb_clock: 3 Hits
- usb: 2 Hits
- stryd_one_codeblocks: 2 Hits
- pga:purpose: 2 Hits
- home:mbhp:module:lcd: 2 Hits
- how_to_organize_a_bulk_order: 2 Hits
- introduction_to_midi: 2 Hits
- windows_toolchain_codeblocks: 2 Hits
- ucdocabstract: 2 Hits
- mbhp_genesis: 2 Hits
- midibox_pokey: 2 Hits
- troubleshooting: 2 Hits
- home:skills:troubleshooting: 2 Hits
- wilba_mb_6582: 2 Hits
- protodeck: 2 Hits
- arkade: 2 Hits
- getting_started_faq: 2 Hits
- midibox_snes_apu: 2 Hits
- apparat_20_construction_blog: 2 Hits
- acsensorizer_04: 2 Hits
- pga:buildregbrd: 1 Hits
- how_to_mix_c_and_asm: 1 Hits
- dougwellington_mb6582_panels: 1 Hits
- home:software: 1 Hits
- john_e._finster: 1 Hits
- mb_rgb-led_matrix_8x8: 1 Hits
- best_pro-looking_midibox: 1 Hits
- elektor_vocoder: 1 Hits
- best_customization_extension: 1 Hits
- pga:compile: 1 Hits
- pga:softwareoverview: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- midiboxmixermanual: 1 Hits
- mbqg_fp: 1 Hits
- pga:buildoutbrd: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- windows_mios32_toolchain_core: 1 Hits
- midi_specification: 1 Hits
- mios: 1 Hits
- midibox_seq_quick_reference: 1 Hits
- layout_improvements: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- mb-lre8x2cs_bulk_order_2014: 1 Hits
- mididocs:seq:launchpadblm: 1 Hits
- eusart_bug: 1 Hits
- midibox_sid_faq: 1 Hits
- svn: 1 Hits
- pga:smtsoldering: 1 Hits
- windows_toolchain_svn: 1 Hits
- bipolar_12v_psu: 1 Hits
- siliconheaven: 1 Hits
- mb808: 1 Hits
- eclipse: 1 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- mios_faq: 1 Hits
- windows_toolchain_core: 1 Hits
- flo: 1 Hits
- pga:buildchanbrd: 1 Hits
- trsequencer: 1 Hits
- change_id: 1 Hits
- best_recycled_midibox: 1 Hits
- lcd: 1 Hits
- transformer: 1 Hits
- mididocs:seq:blm16x16_x: 1 Hits
- midibox_vgmplayer: 1 Hits
- midibox_fm_21: 1 Hits
- encyclopedia_entries: 1 Hits
- start: 1 Hits
- frequently_asked_questions_faq: 1 Hits
- introduction_to_ucapps.de: 1 Hits
- midibox_ay_ym_v2: 1 Hits
- ssm2044_pcb: 1 Hits
- mididoc:midibox_cv_v2: 1 Hits
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 1 Hits
- scs_module: 1 Hits
- mb-606re: 1 Hits
- routine: 1 Hits
- aout_lc_module: 1 Hits
- home: 1 Hits
- wikify:software: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- mb_2069: 1 Hits
- midibox_quad_genesis: 1 Hits
- aout_ng: 1 Hits
- mcan: 1 Hits
- wilba_mb_6582_psuopte: 1 Hits
- wilba_mb_6582_pcbthread: 1 Hits
- wilba_mb_6582_parts_list: 1 Hits
- midibox_ay_3_8912: 1 Hits
- wilba_mb_6582_control_surface_construction_guide: 1 Hits
- dipcoref4: 1 Hits
- subroutine: 1 Hits
- pci: 1 Hits
- pcb: 1 Hits
- durisian: 1 Hits
- speakjet_control_overview: 1 Hits
- home:software:windows:cadsoft_eagle: 1 Hits
- pga:midichart: 1 Hits
- best_diy-looking_midibox: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- neatest_pro_internal_wiring: 1 Hits
- phatline: 1 Hits
- acmidiprotocol: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- mididocs:seq:hardwareconfig: 1 Hits
- midibox: 1 Hits
- home:project:mb808: 1 Hits
- best_user_patches_librairy: 1 Hits
- most_freaky_internal_wiring: 1 Hits
- c_from_first_principles: 1 Hits
- dsp: 1 Hits
- dtmf: 1 Hits
- eisa: 1 Hits
- fiber_optics: 1 Hits
- forum_netiquette: 1 Hits
- frailn_ay-3-8912_mini_sale: 1 Hits
- i_o: 1 Hits
- inductance: 1 Hits
- ir: 1 Hits
- jakes_daddy: 1 Hits
- links: 1 Hits
- megabyte_mb: 1 Hits
- menno: 1 Hits
- midibox_sd_card_sample_player: 1 Hits