MIDIbox

mcan

anonymous@undisclosed.example.com (Anonymous) — Fri, 03 Aug 2018 12:53:45 +0000

MCAN, MIDIbox Controlled Area Network Low cost MIDI(Native) Network using CAN, this is MCAN... ---------- Why? Because we CAN ... ha! I'll stop joking. :) At home I have no space to put my equipment in the middle of the room and maintain an access space behind to rewire the machines for each session. It is boring having to do it every time, especially to waste time and lose inspiration between two takes. For Audio, no problem, I've got a good and very large patchbay. For MIDI I've got…

macos_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 12 Mar 2014 21:34:09 +0000

How to set up the toolchain for coding MIOS32 apps with OS X steps: 0- install Xcode 1- about the terminal 2- get the mios32 files from the repository server 3- install the MIOS32 toolchain 4- configure the paths 5- other derivatives 1- install Xcode

linux_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Mon, 30 Sep 2024 20:15:44 +0000

Core Toolchain Setup for MIOS32 application development on Linux Preparation This document assumes that you have a relatively modern x86 based linux distribution. While it may work other distributions, it has only been tested on x86 Ubuntu 10.10. Many of the commands, especially

windows_mios32_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 01 Jul 2015 10:24:55 +0000

Core Toolchain Setup for MIOS32 application development on Windows The QuickStart Guide still needs to be done. The technical jargon: This is the Core Tools section in a walkthrough on the process of developing MIOS32 Applications, on Microsoft Windows XP, primarily in C, utilising the MIOS32 Operating System. The IDE platform used will be

eclipse

anonymous@undisclosed.example.com (Anonymous) — Tue, 17 Jul 2012 00:19:29 +0000

Introduction This page will instruct you to install and configure Eclipse as your MidiBox Integrated Development Environment (IDE). Eclipse is supported on multiple platforms, including Windows, Linux and Mac OS. The long-term goal is for this wiki page to provide instruction for all platforms. As it stands today, these instructions are written for use on the following operating systems:

m16

anonymous@undisclosed.example.com (Anonymous) — Mon, 08 Oct 2018 09:12:00 +0000

M16 MIDI Interface Add 16 MIDI I/O to your Core, SPI Slave Interface with up to 16 UARTs(MIDI I/O), based on low-cost FPGA... ---------- Features * The FPGA internal clock works @88.67MHz. * Fast 4 wires SPI in slave mode to control the board, 10Mb/s, 5V tolerant.

mios

anonymous@undisclosed.example.com (Anonymous) — Mon, 10 Jan 2011 22:10:57 +0000

MIOS Overview MIOS is the Operating System of the Chip. This Page covers MIOS and the BOOTLOADER (or Bootstrap Loader). General Informations can be found in the Intro-Article: what is a MIDIbox. There are two versions of MIOS: The (older) MIOS8, used for MBHP_Core modules equipped with 8bit PIC uControllers and

dipcoref4

anonymous@undisclosed.example.com (Anonymous) — Mon, 28 Dec 2020 07:39:11 +0000

dipCoreF4 A reduced Core for your MIDIbox App, an STM32F405RG in a DIP40 format. Features * MIOS32 uses same processor family and drivers(no deep change). * Same internal hardware as Disco or wCore (speed, memory, peripherals, etc...) . * Board pinout and package compatible with a MIOS8 PIC

svn

anonymous@undisclosed.example.com (Anonymous) — Tue, 30 Dec 2014 23:25:07 +0000

SVN Repository for MIOS8 and MIOS32 projects MIOS8 and MIOS32 projects are stored in a SVN repository. TODO: explain installation of SVN clients for Windows/MacOS/Linux here Optionally search for “svn” in the wiki to retrieve already existing documentation.

hardwareconfig

anonymous@undisclosed.example.com (Anonymous) — Thu, 18 Sep 2014 20:33:47 +0000

MIDIdocs The MBSEQ_HW.V4 File Forum Discussion Thread - for comments, corrections, or questions about this article This file contains configuration information about your SEQ's hardware - button, LED, and encoder assignments, some low level settings, etc. This file has to be in the root of your SD Card in order for the Wilba Frontpanel to work, because without this file, the SEQ core won't know anything about the buttons and LEDS on your frontpanel.

application_development_32bit

anonymous@undisclosed.example.com (Anonymous) — Sun, 05 Feb 2012 09:54:23 +0000

Link to main ucapps.de MIOS32 programming page, including programming examples: Toolchain setup guides: Windows: windows_mios32_toolchain_core MacOS: macos_mios32_toolchain_core Linux: linux_mios32_toolchain_core

how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng

anonymous@undisclosed.example.com (Anonymous) — Mon, 27 Jun 2016 13:32:29 +0000

How to create custom GLCD fonts/icons/bars for Midibox NG I compiled this tutorial mainly because there aren´t a lot of informations available on this subject and I spent days to figure this out. It requires some amount of work to implement custom fonts and icons in a Midibox_NG, which I will try to guide you through as well as I can. My programming skills are very limited, so there might be better and more efficient ways to do this. So I consider this approach just one possible way.

lcd

anonymous@undisclosed.example.com (Anonymous) — Sun, 10 Jul 2016 15:05:52 +0000

Midibox LCD Module An LCD module isn't an MBHP module, you buy the LCD screen with the PCB attached and driver chips on-board, and that is your LCD module. Here you can find information how to use an LCD with the Midibox MBHP Core module. See also:

building

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2014 19:53:12 +0000

MIDIdocs Building a SEQ V4 Forum Discussion Thread - for comments, corrections, or questions about this article If you're new to the MIDIbox universe, you might be a bit confused about how to actually build one of these things. What PCBs and parts you'll need, where to get them, etc.

midibox

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 05:07:59 +0000

About MIDIbox What is a MIDIbox A MIDIbox is an open-source, non-commercial, DIY, hardware MIDI device. It can perform various functions depending on the firmware that is installed and the hardware that is used. The MIDIbox DIY-projects consist of hardware (MBHP) and software (MIOS Operating System + Application). Some projects have special designed modules, others only require a Core module. Every device needs at least one Core.

core4disc

anonymous@undisclosed.example.com (Anonymous) — Sun, 12 Feb 2023 13:42:48 +0000

Core 4 Discoveryboard STM32F407VGT6 this is one essential part for my triggermatrix5 i need a core pcb which is aviable in Europe, and uses the stm32F407VGT6 chip, which has 1MB ram... Shematic i think there is a error - PB2 is not connected to the CORE MODULE

midibox_quad_genesis

anonymous@undisclosed.example.com (Anonymous) — Wed, 20 Dec 2017 21:19:40 +0000

Page under construction! Summary MIDIbox Quad Genesis (MBQG) is a homebrew synthesizer project in progress, designed and built by Sauraen and originally commissioned by Josh Whelchel. It runs up to four sets of YM2612/YM3438 (OPN2) + SN76489/94/96 (PSG) sound chips, one set of which roughly comprised the sound generation hardware in a Sega Mega Drive / Genesis. The synth is powered by a STM32F4 core running MIOS32, and is based on MIDIbox hardware and software throughout.

stm32f4_module

anonymous@undisclosed.example.com (Anonymous) — Wed, 03 Aug 2016 17:48:53 +0000

Core 32 STM32F4 Introduction Features * 1MB Flash and 192k RAM * Easily available for private persons in small quantities and no SMD soldering skills required * ARM Cortex-M4 CPU is widely supported by the GNU toolchain, accordingly source code can be compiled under Windows/Linux/MacOS w/o spending money for an expensive ARM compiler

windows_toolchain_core

anonymous@undisclosed.example.com (Anonymous) — Wed, 04 Jul 2012 18:37:27 +0000

Core Toolchain Setup for MIOS application development on Windows Don't forget The QuickStart Guide! It's the quick and easy setup. It will work for nearly everyone. Please note that this page is only for MIOS8. For the more powerful STM32 based MIOS32, please visit

midiprocessing

anonymous@undisclosed.example.com (Anonymous) — Mon, 15 Sep 2014 19:48:51 +0000

MIDIdocs The V4L as a MIDI Processor Forum Discussion Thread - for comments, corrections, or questions about this article The V4L can also be used to process incoming midi signals. All incoming MIDI can be forced-to-scale, and effects (like delays and LFOs) can be applied to selected channels. Since firmware version 85, with a configuration change, the processed notes can go out on the same channel they came in on.

ainser8_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 23:51:25 +0000

AINSER8 Module Introduction MBHP_AINSER8 is a Reduced version of the MBHP_AINSER64 module without 1-to-8 multiplexers and on-board VR, and only supported by MIOS32! It is based on the 8-channel ADC MCP3208 from Microchip. It can be used to scan pots and/or faders with 12bit resolution between 0 and 5V.

ainser64_module

anonymous@undisclosed.example.com (Anonymous) — Thu, 04 Aug 2016 09:43:51 +0000

AINSER64 Module Introduction MBHP_AINSER64 is the successor of the MBHP_AIN module, and only supported by MIOS32! It is based on the 8-channel ADC MCP3208 from Microchip and 8×4051 multiplexers so that up to 64 analog inputs are available. They can be used to scan pots and/or faders with 12bit resolution between 0 and 5V..

antichambre

anonymous@undisclosed.example.com (Anonymous) — Sun, 28 Apr 2019 08:42:07 +0000

Antichambre Projects list * MIDIbox TIA, Atari 2600 Synth. * MIDIbox KPR77, MIDIbox 808 adapted to Korg KPR77 Drum Machine.forum gallery * MIDIbox POKEY, Atari POKEY Synth (2013 work).forum gallery * Djo's MIDIbox DR55, a modified & midified Roland DR55.modular synth * MIDIbox 2069, A module based on the Korg NJM2069, LPF + VCA. * MIDIbox TIA, Cartridge Version.You can also follow the thread on forum. * SEQUATEUR, a versatile controller. * OLRE16, A UI module with 16*Enco…

coilwinder

anonymous@undisclosed.example.com (Anonymous) — Mon, 03 Apr 2023 23:40:48 +0000

Coil Winder A Tesla Coil winding machine, controlled by Mios: Watch German Video about using it, and TimeLapse build Watch English Video... CODE, FIRMWARE Install MIOS Studio, connect a Core-Stm32F4 via USB, and Start the STUDIO 1. Upload MIOS BOOTLOADER

midibox_fm_21

anonymous@undisclosed.example.com (Anonymous) — Thu, 02 Jun 2016 02:30:28 +0000

MIDIbox FM V2.1 See and This is a synth by Sauraen constructed in 2014-2015. It's as finished as it ever will be, but it was never documented for others to try to replicate... until now! Please note that this is still not a complete, well-documented project, and certainly not for beginners. I do not guarantee that all the information you will need is available he…

midibox_sd_card_sample_player

anonymous@undisclosed.example.com (Anonymous) — Tue, 29 May 2012 21:14:47 +0000

MIDIbox SD Card Polyphonic Sample Player This is a brief description of a project to play back samples in real time from an SD card to an I2S based DAC on the Midibox. It will play a number of samples simultaneously, mixing the output to the DAC, the number of samples depends upon the performance of the SD card.

seq_v4l_mk._ii

anonymous@undisclosed.example.com (Anonymous) — Wed, 15 Feb 2017 20:49:45 +0000

SEQ v4L mk II An updated SEQ V4L that only needs one ribbon connector to an LPC-17 or STM32F4 Core. Image credit: TK. Schematic Matrix wiring Wiring follows the same form as the original SEQ v4L. Each element is shown separately (please ignore the part designators):

triggermatrix4

anonymous@undisclosed.example.com (Anonymous) — Thu, 21 Oct 2021 13:39:33 +0000

TriggerMatrix V4 REAL: CAD-Design: Left: Serial Nr1 << >> Right: Prototype CODE, FIRMWARE Install MIOS Studio, connect TM4 via USB, and Start the STUDIO 1. Upload MIOS BOOTLOADER 2. (only needet for Virgin Machines) type following commands into the MIOS-TERMINAL:

installing_gnu_on_osx

anonymous@undisclosed.example.com (Anonymous) — Sat, 21 May 2011 20:52:47 +0000

Now located under macos_mios32_toolchain_core

lre-oled-bar

anonymous@undisclosed.example.com (Anonymous) — Fri, 04 Feb 2022 14:22:59 +0000

LRE8x2 096 SSD1306-BAR for Eurorack I made this PCBs to use it with Fairlightii´s mb-lre8x2cs_pcb 4x PCBs on one 100x100mm there is no V-Groove, you have to cut it on the marking groove it on top and back, with a new sharp cutter, do it several times, then break it

lre-oled-bar2

anonymous@undisclosed.example.com (Anonymous) — Tue, 12 Sep 2023 14:24:05 +0000

LRE8x2 096 SSD1306-BAR for Eurorack V2 I made this PCBs to use it with Fairlightii´s mb-lre8x2cs_pcb PCB I didnt panalize it, so you have to do this when ordering the PCB online you will need 4 PCBs per LRE8x2... normally you want to order 8 PCBs (using 2x LRE8x2)

lre5-lcd2

anonymous@undisclosed.example.com (Anonymous) — Tue, 12 Sep 2023 14:45:08 +0000

LRE5-LCD2 * 5 Encoders * 5 Ledrings * 5 ENC-Switchs * 5 3LEDS for ENC-Switches * 1 Shift-Switch * 2 1306 7Pin- OLED-LCDs controlled from a STM32F4 Microcontroller dipcoref4,CV1 build for CV1 as UI-Expansion-PCB. ready for Pick and Place

lucem

anonymous@undisclosed.example.com (Anonymous) — Mon, 06 Jul 2009 17:37:30 +0000

Introduction This is the place to come when it comes down to my activity around MIDI and midibox. Some random photos of my house, my workshop, projects and whatnot About Über-nerd from Germany, born Jan 1982. Studying computer science, had professional training in high-frequency analog electronics, audio signal processing and digital circuitry. Heavy EAGLE user. Programmer since the age of 8, starting on Commodore 64. Languages include C/C++, C#, Java, Basic, Python, Perl, PHP, assembly (808…

mb_olre16

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Apr 2019 08:50:31 +0000

OLRE16 :!: Under Developpment :!: Introduction The Start point was a search about a good LED-Ring for encoders Forum thread . 2 existing solutions , but that could be improved : * The LED Ring Breakout Board from Sparkfun Big, single blue color and only 16 segments. [ ] * Fairlightii LRE8x2CS..Monochrome, Only 16 segments

mb_rgb-led_matrix_8x8

anonymous@undisclosed.example.com (Anonymous) — Mon, 04 Aug 2014 18:33:23 +0000

MIDIbox RGB-LED Matrix 8x8 The RGB LED matrix described here can be used to signal feedback to the user, as for example in my MIDI Matrix with 56 Inputs and 56 Outputs. But, it can also be used for fancy stuff, Vegas mode, bling, impressing your neighbours,... Overview The PCB is as wide as the RGB LED modules themselves, with enough space above and below for mounting holes. This means that the modules can easily be chained horizontally in order to create type crawls. If you cut off the to…

midibox_pokey_2

anonymous@undisclosed.example.com (Anonymous) — Wed, 28 Sep 2016 07:48:15 +0000

MIDIBox Pokey 2 Many years ago, back in 2007, nILS began his work on the MB-POKEY which is documented here on the Wiki and on the Forum New projects came along that he maybe found more interesting, so now we have picked up from where he left to at least continue the work a bit further.

midibox_vgmplayer

anonymous@undisclosed.example.com (Anonymous) — Wed, 06 Apr 2016 14:42:58 +0000

MIDIbox VGM Player This small synth is a demo of the MBHP_Genesis module (available now from the MIDIbox Shop!). Hardware Features * Supports one to four MBHP_Genesis modules, allowing the user to play that number of VGM files simultaneously (one on each board) * OPN2: supports YM2612 and YM3438 * PSG: supports SN76489 and SN76496 directly, SN76494 with external clock generator

midi_interface_whitelist

anonymous@undisclosed.example.com (Anonymous) — Fri, 12 Jun 2015 15:12:31 +0000

To find midi devices known to cause problems check the midi_interface_blacklist. Known to work MIDI interface/OS combinations include the following: Vendor Model OSs notes Edirol UM-880 OS X 10.10.2 Emagic amt8 Mac OS X 10.5 Unitor8 Mac OS X 10.5 E-MU 0404 USB

scs_pcb

anonymous@undisclosed.example.com (Anonymous) — Sat, 11 Sep 2021 09:09:29 +0000

MIDIbox SCS Standard Control Surface module The SCS module implements a standard user interface that is available as a module in the MIOS codebase. It goes nicely with a 20x character LCD and connects to J10 on the core board. An application example can be found in

srio-router

anonymous@undisclosed.example.com (Anonymous) — Sat, 08 Jan 2022 06:41:40 +0000

SRIO-ROUTER * Route 1 Userinterface to 8 Cores * So you save space in your Eurorack * So you save money * Route SRIO (J89 aka DIN and DOUT) * ROUTE 8x OLED Screens (with a extra expansion PCB...) * No Support for AIN ready for Pick and Place

start

anonymous@undisclosed.example.com (Anonymous) — Fri, 10 Jun 2016 14:19:25 +0000

Welcome to the MIDIbox Knowledge Base If you ever wanted to build the midi controller or sequencer of your dreams, or if you want to develop your own, custom MIDIbox - you came to the right spot :) We are working hard to improve the vast amount of information around. If you can help us, please feel free to

tpd_pcb

anonymous@undisclosed.example.com (Anonymous) — Sun, 21 Sep 2025 08:36:28 +0000

MIDIbox SEQ Track Position Display module Introduction Based on an original idea by Hawkeye who implemented an 8×8 LED matrix display to show the current track position in his MB SEQ, I designed the TPD module. It does not only provide an enlarged (and duo-color) LED matrix, but also a BPM display and dedicated tempo/BPM encoder, a step display, and four freely assignable buttons with adjacent duo-LEDs for status feedback.

wikify

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 03:58:22 +0000

MIDIbox Wiki Instructions This page and the other pages throughout entire wikify:* namespace are just a template. Don't edit these pages. The new pages should be laid out like these. Wiki Syntax The best way to learn the syntax and how it is used in the midibox-wiki is just to study existing pages. The syntax is easy to read and learn.

windows_mios32_toolchain_quickstart

anonymous@undisclosed.example.com (Anonymous) — Mon, 09 Mar 2009 13:53:56 +0000

TODO: QuickStart Guide for MIOS32 on Windows

software

anonymous@undisclosed.example.com (Anonymous) — Sat, 20 Dec 2008 02:44:33 +0000

Software PC This section covers details of the software you'll need on your linux, mac os/x, or windows PC, as well as software which is cross-platform. linux osx windows xplatform MBHP This section covers details of software which you will upload to your MIDIbox mios

test_page

anonymous@undisclosed.example.com (Anonymous) — Sun, 09 Jan 2011 21:48:20 +0000

Content This article describes the functionality of the DIN-module. This module is part of the MBHP and provides digital inputs to a MidiBox device Additional Info FIXME This article needs to be reworked

software

anonymous@undisclosed.example.com (Anonymous) — Fri, 19 Dec 2008 16:55:26 +0000

launchpadblm

anonymous@undisclosed.example.com (Anonymous) — Mon, 15 Sep 2014 18:05:53 +0000

MIDIdocs Novation Launchpad Button LED Matrix (BLM) Forum Discussion Thread - for comments, corrections, or questions about this article Since firmware version 87, the SEQ V4 supports the use of two Novation Launchpads as a BLM control surface. Two Launchpads form a 16×8+X BLM, and up to four can be connected to make a full

start

anonymous@undisclosed.example.com (Anonymous) — Thu, 27 Jun 2024 04:59:30 +0000

MIDIbox SEQ V4 Beginner's Guide The Beginner's Guide is intended to cover the basic operation and concepts of the MBSEQv4 step sequencer. It does not include instructions on how to make the most out of all the features of the sequencer, or what each of the options on every menu page does, but it does give a good overview for the new user.