Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
aout_lc_module [2016/08/04 23:44] – [Resolution Adjustment] psykhaze | aout_lc_module [2016/08/04 23:44] – [Introduction] psykhaze |
---|
\\ | \\ |
\\ | \\ |
In difference to the [[AOUT_Module]] or [[AOUT_NG module]], this project doesn't require a special (expensive and hard to get) DAC IC, instead resistors are formed to a discrete R-2R ladder network. Building such a circuit means a lot of soldering effort, but as the MBHP is indented as a Do-It-Yourself platform, and not as a commercial product, this argument is very weak. However, the resistor ladder could be replaced by a DAC with parallel interface (see Karl's schematics), this would still have the advantage, that the DACs are accessible via a serial chain (-> low number of uC pins are allocated), and that the software driver doesn't need to be adapted for a proprietary interface. | In difference to the [[AOUT_Module|AOUT]] or [[AOUT_NG]], this project doesn't require a special (expensive and hard to get) DAC IC, instead resistors are formed to a discrete R-2R ladder network. Building such a circuit means a lot of soldering effort, but as the MBHP is indented as a Do-It-Yourself platform, and not as a commercial product, this argument is very weak. However, the resistor ladder could be replaced by a DAC with parallel interface (see Karl's schematics), this would still have the advantage, that the DACs are accessible via a serial chain (-> low number of uC pins are allocated), and that the software driver doesn't need to be adapted for a proprietary interface. |
\\ | \\ |
\\ | \\ |