Differences

This shows you the differences between two versions of the page.

--- mb-sidr8tr:start [2011/10/18 16:38] – Added j9/j8 header info m00dawg
+++ mb-sidr8tr:start [2011/11/12 15:30] – m00dawg
@@ Line 68: / Line 68: @@
 ^ J9 ^ J8 ^
+^ DIN ^ DOUT ^
 | GND | NC |
 | 5V  | NC |
@@ Line 94: / Line 95: @@
 ==== LED Matrix ====
-This is a proposed layout for an LED matrix board to be used coupled with the above panel design. While other boards can likely be made from home using various methods, it might be wise to have this one printed. Note that this design currently has the mounting holes up higher than the current design of the front panel. The mounting holes were moved down on the panel so the design was more uniform. Modify per your needs!
+I have designed this a few times and finally settled on using a baseboard that houses the LEDs and buttons, and using a daughtboard to house the shift-registers and things. This should also allow the MB-6582 button matrix via another daughter-card.
+{{:mb-sidr8tr:8x8-led-matrix-rev7-brd.png?320}}
+{{:mb-sidr8tr:8x8-led_matrix-daughter-rev1-board.png?320}}
-{{:mb-sidr8tr:8x8-led_matrix-rev6-board.png?320}}
-{{:mb-sidr8tr:8x8-led-matrix-sch-rev6.png?320}}
-{{:mb-sidr8tr:8x8-led-matrix-rev6.zip|Eagle}}
 A [[mb-sidr8tr:mb-mtrx_bulk|Bulk Order]] is being organized is you are interested in obtaining your own board at a better price than doing a single board one-off. If you want to know more about the latest happenings, check out [[http://midibox.org/forums/topic/15425-feedback-for-an-led-matrix-board/page__pid__136259|this]] forum post.