Differences

This shows you the differences between two versions of the page.

--- tm5-gate-board [2022/12/26 18:21] – created phatline
+++ tm5-gate-board [2022/12/28 20:13] – [BOM] phatline
@@ Line 1: / Line 1: @@
-====== Core4Disc Midi-Expansion ======
+====== TM5 Gate-Expansion ======
 {{:phatline:TM5-Gate-Board-3D-Perspektive.jpg?700|}}\\
 {{:phatline:TM5-Gate-Board-3D-Front.jpg?700|}}\\
 {{:phatline:TM5-Gate-Board-3D-Back.jpg?700|}}\\
-This are the Gate In/Out boards, 4 off them are needet to get 16x Gate-input/Trigger, and 16x Gate-Output [[triggermatrix5]]\\
+This are the Gate In/Out boards, 4 off them are needet to get 16x Gate-input/Trigger, and 16x Gate-Output \\
 ====== Shematic ======
@@ Line 10: / Line 10: @@
 ====== Building and BOM======
-Handsolder...\\
+You need this PCB 4times\\
 ===== BOM =====
 ^qty		^reference		^value		^footprint		^MouserPartNr^
 |	1	|	Gate1	|	Header-2x5-Micromatch	|	Header-2x5-Micromatch	|	571-1-2178710-0	|
-|	3	|	H1, H2, H3	|	Montageblock	|	Mounting-Hole-M3-for-FPanel-with-Block	|	none	|
 |	8	|	J1-J8	|	3.5Jack for Gates	|	3-5JACK-CUI_SJ1-3535NG	|	490-SJ1-3535NG	|
 |	8	|	R1-R8	|	1K	|	R-1K-0805-250mW	|	667-ERJ-P06J102V	|
-I dont have to forget to order a ton off "Montageblock"...\\
+ok this is a list for one PCB, for Triggermatrix you need that 4times!\\
+copy following list into this [[https://www.mouser.com/tools/part-list-import.aspx|mouser.com-Link]]
+<WRAP center round box 60%>
+-1-2178710-0|4\\
+-SJ1-3535NG|32\\
+-ERJ-P06J102V|32\\
+</WRAP>
+\\
+**Order from Reichelt:**\\
+x[[https://www.reichelt.de/at/de/idc-stiftwanne-micro-match-10-polig-mpe-372-1-010-p120052.html?&trstct=pos_2&nbc=1|Micromatch-connector 10pin]]\\
+\\
+The 3x Montage Blocks H1,H2,H3 * 4 = 12 - is already includet in the [[triggermatrix5]] - BOM!\\
 {{:phatline:TM5-Gate-Board-PCB.jpg?950|}}\\