User Tools

Site Tools


aout_module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
aout_module [2009/05/06 13:54] 204.138.85.6aout_module [2016/08/06 00:43] (current) – [Introduction] psykhaze
Line 1: Line 1:
-AOUT modules generate analog voltages (and gate signals) controlled by Midibox. Usually these are used to drive Analog Synthesizers.+====== AOUT Module ======
  
-The following modules are available:+{{ :neonking:mbhp_aout_3.jpg?400 |}}
  
-[[http://www.ucapps.de/mbhp_aout.html|AOUT Module]] <sup>uCApps</sup>\\ +=====Introduction===== 
-(Uses the expensive and somewhat hard-to-find MAX525 DACs and MAX6007 voltage reference.  What appears to be a suitable drop-in replacement for MAX6007B appears in [[http://www.midibox.org/forum/index.php/topic,13490.0.html|this thread]]:  the TI LM4040A20IDBZR [[http://www.ti.com/lit/gpn/LM4040A20|(datasheet)]].\\ + 
-[[http://www.ucapps.de/mbhp_aout_lc.html|AOUT_LC Module]] (low cost AOUT Module)<sup>uCApps</sup>\\ +AOUT modules generate **Analog (Control) Voltages (and gate signals)** *. It provides **8 control voltage (CV) outputs with 12 bit resolution and 2 gate outputs**. It is used by various MIDIbox projects to control analog synthesizers and/or FX gear. 
-[[aout_ng|AOUT_NG Module]] (new AOUT Module)\\+\\ 
 +\\ 
 +The **MAX525 DACs** feature better performance than the one used on the [[AOUT_NG]]. **So for perfectionists wanting to drive analog VCOs with maximum tuning precision, the AOUT is the right choice**. Bipolar operation is possible but needs some external parts. Althought, MAX525 is quite expensive and has limited availability. 
 + 
 +=====Parts / Schematic===== 
 + 
 +see [[aout_board_parts_list|AOUT Parts List]] 
 + 
 +  * {{http://ucapps.de/mbhp/mbhp_aout.pdf|Schematic}}<sup>UCapps</sup> 
 + 
 +Replacement for MAX6007B Voltage Reference :  **LM4040A20** [[http://www.ti.com/lit/gpn/LM4040A20|(datasheet)]].\\
  
-The SHX8 module is used to extend the number of AOUT outputs using Sample and Hold chips 
  
-[[http://www.ucapps.de/mbhp_shx8.html|SHX8 Module]] (expands AOUT Module < 64 CV Outputs) <sup>uCApps</sup>\\ 
-(expired, S&H chips are discontinued/obsolete)\\ 
aout_module.1241618047.txt.gz · Last modified: 2009/05/06 13:54 by 204.138.85.6