Differences

This shows you the differences between two versions of the page.

--- clock2audio2clock [2018/05/25 03:09] – phatline
+++ clock2audio2clock [2021/01/17 01:00] (current) – [Building FABRICATED PCB] phatline
@@ Line 6: / Line 6: @@
 {{:phatline:Clk2aClk.jpg?1000|}}\\
 {{youtube>qjcWe_V-kEI}}
+{{youtube>YXOqIRc4XmM}}
 {{:phatline:Clk2aClk-test-setup.jpg?1000|}}\\
 ===== Introduction =====
-i fell in love with a zoom livetrack-l12, a multitrack-audio-recorder, in a compact design, severell submixes, parametric eqs, compressor, efx and a extra master-track-recording, and that for a good price...\\
+i use a zoom livetrack-l12, a multitrack-audio-recorder: compact design, severell submixes, parametric eqs, compressor, efx and a master-track-recording, a good price...\\
-but it doesnt have midi... in specially it does not have a midiclock.\\
+AND it doesnt have midi... it does not do midiclock.\\
 so when i have to make a track new, or i want to overdub a track, a track that is Midiclock-Driven a sequencer track for example...\\
 \\
@@ Line 30: / Line 30: @@
   * 3x Midi-Cables\\
+====== Shematic ======
+{{:phatline:clk2a2clk-shematic.png?900|}}\\
+====== Building FABRICATED PCB ======
+for DIY on Protoboard - see below "Building DIY"\\
+The Design is optimized for Pick and Place most SMD Parts are on the Back-PCB\\
+i ordered 5 PCBs from JLCPCP with almost all SMD Parts (except Thruholes and the PTC) presoldered\\
+now waiting for Presoldered PCBs\\
+{{:phatline:clk2a2clk-3D-top.png?500|}}\\
+arg... Jacks to near by... FIXME\\
+{{:phatline:clk2a2clk-3D-back.png?500|}}\\
+===== BOM =====
+^Value^Designator^Footprint^LCSC Part Number^Library-Type^Mouser^
+|47uF|C1,C2,C3,C4|midibox:1206-C|C96123|basic|
+|100nF|C5,C6,C7|midibox:1206-C|C24497|basic|
+|220nF|C8|midibox:1206-C|C1857|basic|
+|1N4148W|D1|midibox:SOD123-DIODE|C81598|basic|
+|LED-Yellow|D2,D3|midibox:0603-LED|C72038|basic|
+|BootLoad|J1|midibox:Header-1x2|
+|Debug|J2|midibox:Header-1x2|
+|Int.Sw|J3|midibox:Header-1x2|
+|Header-1x3|J4|midibox:Header-1x3|
+|Midi-DIN-5-Socket_RX|J5|midibox:Midi-DIN5-MAB5SH|||806-KCDX-5S-S2 |
+|Midi-DIN-5-Socket_TX|J6,J7|midibox:Midi-DIN5-MAB5SH|||806-KCDX-5S-S2 |
+|3.5Jack|J8,J9,J10|midibox:35JACK-CUI_SJ1-3535NG-PI|||490-SJ1-3535NG |
+|CV1|JAUT1|midibox:Header-1x2|
+|Mounting-Hole|M0,M1,M2,M3,M4|midibox:Mounting-Hole-M3|
+|PTC|PTC1|midibox:1206-R|C126818|extended|576-1206L150THWR|
+|4K7|Rb1,R1,R2,R3|midibox:1206-R|C17936|basic||
+|1K|R4|midibox:1206-R|C4410|basic||
+|220|R7,R8,R9,R10,R11,R12,R13,R14|midibox:1206-R|C17958|basic|
+|10K|Ra1,Ra2,R5,R6|midibox:1206-R|C17902|basic||
+|100K|Rf1,Rf15|midibox:1206-R|C17900|basic||
+|DIPCOREF4_52P|U1|dipcore-V2C:dipCoreF4_v2c-52p-DIP-40-CMPNT_CORE_52P||@Antichambre|
+|6N138|U2|midibox:DIP-8|||512-6N138M |
+|MCP6002|U3|midibox:SOP-8_SOIC-8|C7377|basic|
+|mouse-cut|cut1,cut2,cut3|midibox:mouse-cut|
+====== Building DIY ======
 {{:phatline:Clk2aClk-midibox.jpg?1000|}}\\
 **Midibox:**\\