clock2audio2clock
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| clock2audio2clock [2018/07/20 20:43] – [clk2a2clk] phatline | clock2audio2clock [2021/01/17 01:00] (current) – [Building FABRICATED PCB] phatline | ||
|---|---|---|---|
| Line 30: | Line 30: | ||
| * 3x Midi-Cables\\ | * 3x Midi-Cables\\ | ||
| + | ====== Shematic ====== | ||
| + | {{: | ||
| + | |||
| + | ====== Building FABRICATED PCB ====== | ||
| + | for DIY on Protoboard - see below " | ||
| + | The Design is optimized for Pick and Place most SMD Parts are on the Back-PCB\\ | ||
| + | i ordered 5 PCBs from JLCPCP with almost all SMD Parts (except Thruholes and the PTC) presoldered\\ | ||
| + | now waiting for Presoldered PCBs\\ | ||
| + | {{: | ||
| + | arg... Jacks to near by... FIXME\\ | ||
| + | {{: | ||
| + | |||
| + | ===== BOM ===== | ||
| + | ^Value^Designator^Footprint^LCSC Part Number^Library-Type^Mouser^ | ||
| + | |47uF|C1, | ||
| + | |100nF|C5, | ||
| + | |220nF|C8|midibox: | ||
| + | |1N4148W|D1|midibox: | ||
| + | |LED-Yellow|D2, | ||
| + | |BootLoad|J1|midibox: | ||
| + | |Debug|J2|midibox: | ||
| + | |Int.Sw|J3|midibox: | ||
| + | |Header-1x3|J4|midibox: | ||
| + | |Midi-DIN-5-Socket_RX|J5|midibox: | ||
| + | |Midi-DIN-5-Socket_TX|J6, | ||
| + | |3.5Jack|J8, | ||
| + | |CV1|JAUT1|midibox: | ||
| + | |Mounting-Hole|M0, | ||
| + | |PTC|PTC1|midibox: | ||
| + | |4K7|Rb1, | ||
| + | |1K|R4|midibox: | ||
| + | |220|R7, | ||
| + | |10K|Ra1, | ||
| + | |100K|Rf1, | ||
| + | |DIPCOREF4_52P|U1|dipcore-V2C: | ||
| + | |6N138|U2|midibox: | ||
| + | |MCP6002|U3|midibox: | ||
| + | |mouse-cut|cut1, | ||
| + | |||
| + | |||
| + | |||
| + | ====== Building DIY ====== | ||
| {{: | {{: | ||
| **Midibox: | **Midibox: | ||
clock2audio2clock.1532119404.txt.gz · Last modified: 2018/07/20 20:43 by phatline