Differences

This shows you the differences between two versions of the page.

--- encoder_specifications [2006/04/06 18:05] – illogik
+++ encoder_specifications [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Bourns PEC11-series detented encoders (From SmashTV) ======
-Encoder mode: "DETENTED2"
-Pinout: [[http://www.avishowtech.com/mbhp/images/encspecs17.gif]]
-Note: the rightmost picture is "top down" (as seen from the top of the encoder looking down to the shaft)
-pin "A" goes to D1
-pin "C" goes to Vs
-pin "B" goes to D0
-(This means that, encoder C pin is "common". Encoder B pin goes to lower numbered DIN pin (of two pins assigned to that encoder) and encoder A pin to higher numbered DIN pin.)
-the detent can be removed
-Thanks go to:
-mandingo: [[http://69.56.171.55/~midibox/forum/index.php?topic=3843.msg25094#msg25094]]
-jdutcher: [[http://69.56.171.55/~midibox/forum/index.php?topic=3911.msg25766#msg25766]]
-xcoulonx: [[http://69.56.171.55/~midibox/forum/index.php?topic=3299.msg23699#msg23699]]
-====== Encoders from VOTI (www.voti.nl) ======
-M-SW-ROT, detented rotary encoder, price EUR 1,19
-Encoder mode: "DETENTED2" (not 100% sure will verify later)
-pinout;
-[[http://www.voti.nl/docs/rotary-encoder.jpg]]
-if you view the encoder from the top with the pins pointing towards you;
-left pin (A) goes to D0
-middle pin (B) goes to D1
-right pin (C) goes to Vs
-the detent can also be removed