Differences

This shows you the differences between two versions of the page.

--- home:mbhp:module:din [2008/12/02 20:25] – Just Phil
+++ home:mbhp:module:din [2008/12/20 01:45] (current) – Fixed link stryd_one
@@ Line 5: / Line 5: @@
 ===== Getting Started =====
-  * [[:home:skills:preparation | Preparation]]
+  * [[:home:skills:tools| Tools]]
   * [[:home:skills:soldering]]
@@ Line 17: / Line 17: @@
   * etc
 ===== Details =====
 === Pins ===
-===== DIN & DOUT pin-numbers =====
+[[din_dout_pin_list | DIN & DOUT pin table]]
-The following table shows the relation between pin- and serial-register-numbers on the software side, and physical pins and their labeling on the hardware side. Shiftregisters are always counted from 1 (also on the software-side), and pins are always counted from 0.\\
-Please note that the order of DOUT pins is reversed compared to DIN pins. For a deeper explanation of this issue, refer the information after the table.
-==== Pin table ====
-^ Shift Register ^ SR number ^ Pin Number (sw) ^ Pin Hex number (sw) ^ Pin Name (DIN PCB / SR IC) ^ Pin Name (DOUT PCB / SR IC) ^
-|first|1|0|0x00|D0 / QA|D7 / H|
-|first|1|1|0x00|D1 / QB|D6 / G|
-|first|1|2|0x00|D2 / QC|D5 / F|
-|first|1|3|0x00|D3 / QD|D4 / E|
-|first|1|4|0x00|D4 / QE|D3 / D|
-|first|1|5|0x00|D5 / QF|D2 / C|
-|first|1|6|0x00|D6 / QG|D1 / B|
-|first|1|7|0x00|D7 / QH|D0 / A|
-|second|2|8|0x0 8|D0 / QA|D7 / H|
-|second|2|9|0x0 9|D1 / QB|D6 / G|
-|second|2|10|0x0a|D2 / QC|D5 / F|
-|second|2|11|0x0b|D3 / QD|D4 / E|
-|second|2|12|0x0c|D4 / QE|D3 / D|
-|second|2|13|0x0d|D5 / QF|D2 / C|
-|second|2|14|0x0e|D6 / QG|D1 / B|
-|second|2|15|0x0f|D7 / QH|D0 / A|
-|third|3|16|0x10|D0 / QA|D7 / H|
-|third|3|17|0x11|D1 / QB|D6 / G|
-|third|3|18|0x12|D2 / QC|D5 / F|
-|third|3|19|0x13|D3 / QD|D4 / E|
-|third|3|20|0x14|D4 / QE|D3 / D|
-|third|3|21|0x15|D5 / QF|D2 / C|
-|third|3|22|0x16|D6 / QG|D1 / B|
-|third|3|23|0x17|D7 / QH|D0 / A|
-|fourth|4|24|0x18|D0 / QA|D7 / H|
-|fourth|4|25|0x19|D1 / QB|D6 / G|
-|fourth|4|26|0x1a|D2 / QC|D5 / F|
-|fourth|4|27|0x1b|D3 / QD|D4 / E|
-|fourth|4|28|0x1c|D4 / QE|D3 / D|
-|fourth|4|29|0x1d|D5 / QF|D2 / C|
-|fourth|4|30|0x1e|D6 / QG|D1 / B|
-|fourth|4|31|0x1f|D7 / QH|D0 / A|
-|fifth|5|32|0x20|D0 / QA|D7 / H|
-|fifth|5|33|0x21|D1 / QB|D6 / G|
-|fifth|5|34|0x22|D2 / QC|D5 / F|
-|fifth|5|35|0x23|D3 / QD|D4 / E|
-|fifth|5|36|0x24|D4 / QE|D3 / D|
-|fifth|5|37|0x25|D5 / QF|D2 / C|
-|fifth|5|38|0x26|D6 / QG|D1 / B|
-|fifth|5|39|0x27|D7 / QH|D0 / A|
-|sixth|6|40|0x2 8|D0 / QA|D7 / H|
-|sixth|6|41|0x2 9|D1 / QB|D6 / G|
-|sixth|6|42|0x2a|D2 / QC|D5 / F|
-|sixth|6|43|0x2b|D3 / QD|D4 / E|
-|sixth|6|44|0x2c|D4 / QE|D3 / D|
-|sixth|6|45|0x2d|D5 / QF|D2 / C|
-|sixth|6|46|0x2e|D6 / QG|D1 / B|
-|sixth|6|47|0x2f|D7 / QH|D0 / A|
-|seventh|7|48|0x30|D0 / QA|D7 / H|
-|seventh|7|49|0x31|D1 / QB|D6 / G|
-|seventh|7|50|0x32|D2 / QC|D5 / F|
-|seventh|7|51|0x33|D3 / QD|D4 / E|
-|seventh|7|52|0x34|D4 / QE|D3 / D|
-|seventh|7|53|0x35|D5 / QF|D2 / C|
-|seventh|7|54|0x36|D6 / QG|D1 / B|
-|seventh|7|55|0x37|D7 / QH|D0 / A|
-|eighth|8|56|0x3 8|D0 / QA|D7 / H|
-|eighth|8|57|0x3 9|D1 / QB|D6 / G|
-|eighth|8|58|0x3a|D2 / QC|D5 / F|
-|eighth|8|59|0x3b|D3 / QD|D4 / E|
-|eighth|8|60|0x3c|D4 / QE|D3 / D|
-|eighth|8|61|0x3d|D5 / QF|D2 / C|
-|eighth|8|62|0x3e|D6 / QG|D1 / B|
-|eighth|8|63|0x3f|D7 / QH|D0 / A|
-|ninth|9|64|0x40|D0 / QA|D7 / H|
-|ninth|9|65|0x41|D1 / QB|D6 / G|
-|ninth|9|66|0x42|D2 / QC|D5 / F|
-|ninth|9|67|0x43|D3 / QD|D4 / E|
-|ninth|9|68|0x44|D4 / QE|D3 / D|
-|ninth|9|69|0x45|D5 / QF|D2 / C|
-|ninth|9|70|0x46|D6 / QG|D1 / B|
-|ninth|9|71|0x47|D7 / QH|D0 / A|
-|tenth|10|72|0x4 8|D0 / QA|D7 / H|
-|tenth|10|73|0x4 9|D1 / QB|D6 / G|
-|tenth|10|74|0x4a|D2 / QC|D5 / F|
-|tenth|10|75|0x4b|D3 / QD|D4 / E|
-|tenth|10|76|0x4c|D4 / QE|D3 / D|
-|tenth|10|77|0x4d|D5 / QF|D2 / C|
-|tenth|10|78|0x4e|D6 / QG|D1 / B|
-|tenth|10|79|0x4f|D7 / QH|D0 / A|
-|eleventh|11|80|0x50|D0 / QA|D7 / H|
-|eleventh|11|81|0x51|D1 / QB|D6 / G|
-|eleventh|11|82|0x52|D2 / QC|D5 / F|
-|eleventh|11|83|0x53|D3 / QD|D4 / E|
-|eleventh|11|84|0x54|D4 / QE|D3 / D|
-|eleventh|11|85|0x55|D5 / QF|D2 / C|
-|eleventh|11|86|0x56|D6 / QG|D1 / B|
-|eleventh|11|87|0x57|D7 / QH|D0 / A|
-|twelfth|12|88|0x5 8|D0 / QA|D7 / H|
-|twelfth|12|89|0x5 9|D1 / QB|D6 / G|
-|twelfth|12|90|0x5a|D2 / QC|D5 / F|
-|twelfth|12|91|0x5b|D3 / QD|D4 / E|
-|twelfth|12|92|0x5c|D4 / QE|D3 / D|
-|twelfth|12|93|0x5d|D5 / QF|D2 / C|
-|twelfth|12|94|0x5e|D6 / QG|D1 / B|
-|twelfth|12|95|0x5f|D7 / QH|D0 / A|
-|thirteenth|13|96|0x60|D0 / QA|D7 / H|
-|thirteenth|13|97|0x61|D1 / QB|D6 / G|
-|thirteenth|13|98|0x62|D2 / QC|D5 / F|
-|thirteenth|13|99|0x63|D3 / QD|D4 / E|
-|thirteenth|13|100|0x64|D4 / QE|D3 / D|
-|thirteenth|13|101|0x65|D5 / QF|D2 / C|
-|thirteenth|13|102|0x66|D6 / QG|D1 / B|
-|thirteenth|13|103|0x67|D7 / QH|D0 / A|
-|fourteenth|14|104|0x6 8|D0 / QA|D7 / H|
-|fourteenth|14|105|0x6 9|D1 / QB|D6 / G|
-|fourteenth|14|106|0x6a|D2 / QC|D5 / F|
-|fourteenth|14|107|0x6b|D3 / QD|D4 / E|
-|fourteenth|14|108|0x6c|D4 / QE|D3 / D|
-|fourteenth|14|109|0x6d|D5 / QF|D2 / C|
-|fourteenth|14|110|0x6e|D6 / QG|D1 / B|
-|fourteenth|14|111|0x6f|D7 / QH|D0 / A|
-|fifteenth|15|112|0x70|D0 / QA|D7 / H|
-|fifteenth|15|113|0x71|D1 / QB|D6 / G|
-|fifteenth|15|114|0x72|D2 / QC|D5 / F|
-|fifteenth|15|115|0x73|D3 / QD|D4 / E|
-|fifteenth|15|116|0x74|D4 / QE|D3 / D|
-|fifteenth|15|117|0x75|D5 / QF|D2 / C|
-|fifteenth|15|118|0x76|D6 / QG|D1 / B|
-|fifteenth|15|119|0x77|D7 / QH|D0 / A|
-|sixteenth|16|120|0x7 8|D0 / QA|D7 / H|
-|sixteenth|16|121|0x7 9|D1 / QB|D6 / G|
-|sixteenth|16|122|0x7a|D2 / QC|D5 / F|
-|sixteenth|16|123|0x7b|D3 / QD|D4 / E|
-|sixteenth|16|124|0x7c|D4 / QE|D3 / D|
-|sixteenth|16|125|0x7d|D5 / QF|D2 / C|
-|sixteenth|16|126|0x7e|D6 / QG|D1 / B|
-|sixteenth|16|127|0x7f|D7 / QH|D0 / A|
-==== Numbers, labels and order of pins ====
-Also refer this forum article: http://www.midibox.org/forum/index.php/topic,12379.0.html
-== Pin and SR order ==
-For DOUT shift registers, software pin-numbers will be reflected in reverse direction on hardware level:\\
-pin-number 0 (software level) is D7 of the first shift register (hardware level), not D0!\\
-pin-number 15 (software level) is D0 of the second shift register(hardware level), not D7!
-The first shift register is for both DIN and DOUT the one that is closest to the core on hardware level.
-== Labeling ==
-In the datasheets of the shift-register IC's, D0 is often labled A / QA, D7 is labled H / QH.\\
-In TK's layouts the labels for IC-pins are I0 - I7, O0 - 07, which corresponds to A/QA - H/QH.\\
-== DIN chain ==
-hardware-level: CORE <- R1::qH <- R1::H <- R1 <- R1::G ..... R2::qH <- R2::H etc.\\
-The first bit read is DIN1::I7, this goes to the MSB on software level. MSB represents the higher pin value,\\
-so you have the same order in hard-  as in software.
-== DOUT  chain ==
-hardware-level: CORE -> R1::SER -> R1::A -> R1::B -> R1::C ..... R2::SER -> R2::A etc.\\
-first bit pushed out is LSB of the last SR(software level), this goes to Rlast::H. Last bit pushed out is MSB of first SR (software level), this goes to R1:A. On software level, MSB represents the higher pin value, so A will represent alway the higher pin value on hw-level for DOUT chains.
-== Bit order ==
-MIOS_DOUT_SRSet / MIOS_DOUT_SRGet / MIOS_DIN_SRSet / MIOS_DIN_SRGet: LSB always reflects the lowest pin number, MSB the highest pin number.
-==== Pin mappings in software (assembler)====
-Sometimes the pin numbers of special DINs or DOUTs can be specified in the main.asm or setup_*.asm file of a MIOS application.
-FIXME this should go in the application's user manual.
-=== Examples ===
-<code>
-#define DEFAULT_MIDI_RX_LED 0x40        ; DOUT SR#9, pin D0
-#define DEFAULT_MIDI_TX_LED 0x41        ; DOUT SR#9, pin D1
-</code>
-<code>
-#define DEFAULT_DIN_MENU_EXEC         7       ; menu exec button assigned to DIN pin #7
-#define DEFAULT_DIN_MENU_SNAPSHOT     6       ; menu snapshot button assigned to DIN pin #4
-#define DEFAULT_DIN_MENU_RIGHT        5       ; NOT USED - overlayed by datawheel
-#define DEFAULT_DIN_MENU_LEFT         4       ; NOT USED - overlayed by datawheel
-</code>
-<code>
-     ;;         SR  Pin  Mode
-      ENC_ENTRY  5,  0,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 1
-      ENC_ENTRY  5,  2,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 2
-      ENC_ENTRY  5,  4,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 3
-      ENC_ENTRY  5,  6,  MIOS_ENC_MODE_NON_DETENTED   ; V-Pot 4
-</code>
 ===Available Ports===