Differences

This shows you the differences between two versions of the page.

--- mb-lre8x2cs_pcb [2013/01/17 15:17] – fairlightiii
+++ mb-lre8x2cs_pcb [2016/06/22 00:03] (current) – [Pictures] psykhaze
@@ Line 1: / Line 1: @@
-===== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface=====
+====== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface ======
 Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules with 16 LEDrings and 16 encoders.
@@ Line 9: / Line 9: @@
 It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings.
-==== PCB ====
+===== PCB =====
 The PCB have components soldered on the two sides.\\
@@ Line 20: / Line 20: @@
 The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\
-====Pictures====
+=====Pictures=====
 ==Protoboard (note this is not the last version but has same dimensions and LEDs/Encoders positioning):==
@@ Line 142: / Line 142: @@
 |Kingbright WP103HD|5x2x7mm rectangular|[[http://fr.mouser.com/ProductDetail/Kingbright/WP103HD/?qs=sGAEpiMZZMs4quMj8r4lmhjquLrW8G4%252b6fJ5ym%2fib3s%3d|Mouser]]| |  X  | |Tk|
 |LED 3MM RT|3mm round|[[http://www.reichelt.de/LEDs-standard-hell/LED-3MM-RT/3/index.html?;ACTION=3;LA=446;ARTICLE=10228;GROUPID=3018;artnr=LED+3MM+RT|Reichelt]]|  X  | | |Tk|
-|"10001"|5x2x7mm rectangular|[[http://www.auspiciousmall.com/index.php?main_page=product_info&cPath=78_1_2&products_id=19|auspiciousmall.com]]| |  X  | |Fairlightiii|
+|"10001"|5x2x7mm rectangular|[[http://www.auspiciousmall.com/index.php?main_page=product_info&cPath=78_1_2&products_id=19|auspiciousmall.com]]|  X  |  X  |Used without ULNs(prototype)|Fairlightiii|
 |Kingbright L-934ID|3mm round|[[http://www.segor.de/#Q=LED%203%20rt%20diffus%2050mcd%20630
 |Segor Electronics]]|  X  | | |rvlt|
+|Kingbright WP132XID|3mm round|[[http://fr.mouser.com/ProductDetail/Kingbright/WP132XID/?qs=sGAEpiMZZMs4quMj8r4lmsNxrQ0ZQMdoZ/c/v7yOhNA= |Mouser]]|  X  | |Used without ULNs|grizz|
+|Kingbright WP132XID|3mm round|[[http://de.mouser.com/ProductDetail/Kingbright/WP132XID/?qs=sGAEpiMZZMs4quMj8r4lmsNxrQ0ZQMdoZ%2fc%2fv7yOhNA%3d |Mouser]]| |  X  |Used withMIDIbox NG & ULNs|MaG2k|
+|Kingbright WP113SRDT|5x2x7mm rectangular|[[http://de.mouser.com/ProductDetail/Kingbright/WP113SRDT/?qs=%2fha2pyFadugD%2fTsmQfHeoZzOEu7l2adZD53TPtc4aU1OtJcXIaccXQ%3d%3d |Mouser]]| |  X  |Used withMIDIbox NG & ULNs|MaG2k|
+|smashTV is selling|3mm round|[[http://www.avishowtech.com/buy.html |smashTV]]| |  X  |Used withMIDIbox NG & ULNs|MaG2k|
+|Tayda Electronics|3mm round|[[http://www.taydaelectronics.com/leds/round-leds/3mm-leds/led-3mm-red.html |Tayda Electronics]]|  X  | |Used withMIDIbox NG & ULNs|MaG2k|
 ====Components====
@@ Line 221: / Line 225: @@
-===Whishlist===
+====Whishlist====
 For an eventual next revision of the PCB, this is a list of improvements that members are free to complete:
-  * Changing IN/OUT sockets by polarized sockets and improving the silkscreen (avoid confusing SI/SO pin).   //Tk//
+  * <del>Changing IN/OUT sockets by polarized sockets and improving the silkscreen (to avoid confusing SI/SO pin)</del>.   //Tk// **Done**
-  * Moving cap C5 (too close to the IN socket).   //Tk//
+  * <del>Moving cap C5 (too close to the IN socket)</del>.   //Tk// **Done**
-  * Trying to move some critical vias.   //Fairlightiii//
+  * <del>Trying to move some critical vias</del>.   //Fairlightiii// **Done**
-  * What about the use of ULN2803s?   //Fairlightiii//
+  * What about the use of ULN2803s?   //Fairlightiii// **Let them here for 8x2 configuration, not present on upcoming 4x2 and 8x1 boards**
-  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?).   //Fairlightiii//
+  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?).   //Fairlightiii// **Not planned to be implemented**
-  * What about the size of the PCB?   //Fairlightiii//
+  * What about the size of the PCB?   //Fairlightiii// **Slightly less big (I won some mm in the edges)**
+  * new arrangment of encoders and LED-rings in 4x4 matrix?  //MaG2k// **Upcoming 4x2 and 8x1 boards**