Differences

This shows you the differences between two versions of the page.

--- mb-lre8x2cs_pcb [2013/02/21 13:33] – [Whishlist] update fairlightiii
+++ mb-lre8x2cs_pcb [2016/06/22 00:03] (current) – [Pictures] psykhaze
@@ Line 1: / Line 1: @@
-===== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface=====
+====== MB-LRE8x2CS PCB / 16 LEDrings/Encoders Control Surface ======
 Welcome to the wiki page of the control surface board featuring combo DINx4 and improved DOUTx4 modules with 16 LEDrings and 16 encoders.
@@ Line 9: / Line 9: @@
 It is a very practical and cheap way to make a midi controller with adding only a core or make a more important controller without having to wire LEDrings.
-==== PCB ====
+===== PCB =====
 The PCB have components soldered on the two sides.\\
@@ Line 20: / Line 20: @@
 The diameter of each LEDring is 1,299 inch (33 mm) with the use of 3mm LED.\\
-====Pictures====
+=====Pictures=====
 ==Protoboard (note this is not the last version but has same dimensions and LEDs/Encoders positioning):==
@@ Line 233: / Line 233: @@
   * <del>Trying to move some critical vias</del>.   //Fairlightiii// **Done**
   * What about the use of ULN2803s?   //Fairlightiii// **Let them here for 8x2 configuration, not present on upcoming 4x2 and 8x1 boards**
-  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?).   //Fairlightiii// **No implemented**
+  * Trying to add DINX2 onboard to handle the 16 encoder switches (start/end of the chain?).   //Fairlightiii// **Not planned to be implemented**
-  * What about the size of the PCB?   //Fairlightiii//**Slightly less big (I won some mm in the edges)**
+  * What about the size of the PCB?   //Fairlightiii// **Slightly less big (I won some mm in the edges)**
-  * new arrangment of encoders and LED-rings in 4x4 matrix?  //MaG2k//**Upcoming 4x2 and 8x1 boards**
+  * new arrangment of encoders and LED-rings in 4x4 matrix?  //MaG2k// **Upcoming 4x2 and 8x1 boards**