Differences

This shows you the differences between two versions of the page.

--- mbhp_genesis_ls [2016/04/02 17:13] – sauraen
+++ mbhp_genesis_ls [2016/11/22 19:22] (current) – [Parts List] sauraen
@@ Line 12: / Line 12: @@
 Both buffers must be powered from +5V, not +3.3V or whatever the MCU uses. In addition, the MCU must be tolerant of 5V signals being applied to its I/O pins (the CORE_STM32F4 module is tolerant)--otherwise it will damage the MCU!
+===== Parts List =====
+^ Qty ^ Ref. Deg. ^ Part Name ^ Mouser Part Number ^ Description / Notes ^
+| 1 | U101 | 74HCT245 | 595-SN74HCT245N | Bidirectional buffer chip |
+| 1 | U102 | 74HCT541 | 595-SN74HCT541N | Buffer chip |
+| 2 | [U101], [U102] | 20-pin 0.3" DIP socket | 571-1-2199298-6 | Socket for chips |
+| 2 | J101, J102 | 10x2 pin header, 0.1" pitch | 649-68691-420HLF | Connectors to core and MBHP_Genesis module |
+| 1 | J103 | 2x1 pin header, 0.1" pitch | 571-826936-2 | Connector for +5V power from core |
+| 2 | C101, C102 | 0.1 uF | 21RZ310-RC | Power supply filtering capacitors for chips (place one next to each chip's +5V connection) |
+| 1 | C103 | 10 uF | 140-REA100M1HBK0511P | Power supply filtering capacitor for board |
+| 1 | --- | --- | e.g. 854-SB4 | Prototyping board to build circuit on |