Differences

This shows you the differences between two versions of the page.

--- mbseq_v4_plus [2017/09/10 21:19] – [Required modules] latigid_on
+++ mbseq_v4_plus [2017/09/11 20:53] (current) – removed latigid_on
@@ Line 1: / Line 1: @@
-====== SEQ V4+ ======
-Around November 2016 I embarked upon a new version of the SEQ v4. Some initial concepts had an integrated 16*4 BLM included, but the idea was refined to something simpler.
-The goals of the project are to provide an upgraded control surface with high-quality hardware. This includes Matias keyswitches rated at 50M cycles and a streamlined workflow with a dedicated button row.
-Although I (latigid on) have done most of the design and prototyping, I am in communication with TK. who will cover the software changes to get the new control surface up and running. I've also had a lot of collaboration with Adrian Hallik who is looking at a case design.
-===== Required modules =====
-The following components are intended to comprise a full SEQ V4+:
-  * [[SEQV4plus_le_MEC|le MEC]] (*2 required)
-    * [[SEQV4plus_Beat_LED|Beat LED]] (optional but recommended)
-  * [[SEQV4plus_ENC-PLATE|ENC-PLATE]] (*2 required)
-  * [[SEQV4plus_JOG-TRANS|JOG-TRANS]]
-  * Two 40*2 OLED displays (details later)
-  * A [[wcore|wCoreF4]] including:
-    * [[wcoref4_pcb|wCoreF4 PCB]]
-    * [[wcore_usb|USB-power module]]
-    * [[wcore_res-sd|RES-SD module]]
-  * [[wcore_midi8|MIDI8]]
-  * [[wcore_i2c|I2C]]
-  * [[wcore_line-transmit|line-transmit]]
-    * in effect there is space for a DB-25 expansion port, so alternative options are possible.