Differences

This shows you the differences between two versions of the page.

--- mf_ng_board_parts_list [2016/06/28 23:42] – [Compatible Motorfaders] psykhaze
+++ mf_ng_board_parts_list [2016/07/09 20:26] (current) – [MotorFader NG] psykhaze
@@ Line 1: / Line 1: @@
 ====== MotorFader NG ======
-{{ ::neonking:mbhp_mf_v3_proto1.jpg?direct&500 |}}
+{{ ::neonking:mbhp_mf_v3_proto1.jpg?direct&600 |}}
-===== Introduction =====
+  * [[http://ucapps.de/mbhp_mf_ng.html|Official UcApps Page]]
+  * {{http://ucapps.de/mbhp/mbhp_mf_ng.pdf|MF-NG Schematic}}<sup>UCApps</sup>
-[[http://ucapps.de/mbhp_mf_ng.html|Official UcApps Page]]
+===== Parts List =====
-the Motorfader NG module was designed with following rules :
+^ Description           ^ Type             ^ Quantity ^  Reichelt Ref      ^ Mouser Ref     ^
+| L293D                 | IC               | 4        | L 293 D            |                |
-  * High-quality faders (Alps K faders with "coreless" motors) Handling
+| 74HC165               | IC               | 1        | 74HC 165           |                |
-  * Deliver stable enough ADC conversion results due to the reduced 3.3V voltage range
+| PIC18F452-I/P         | Microcontroller  | 1        | PIC 18F452-I/P     |                |
-  * Handle touch sensors properly without heavy CPU load (without an additional external device or microcontroller)
+| 10 MHz                | Quartz           | 1        | 10,0000-HC49U-S    |                |
-  * PIC based projects Compatible for best usability
+| 6N138                 | Optocoupler      | 1        | 6N 138             |                |
-  * DIY friendly and not requiring additional gear for something which isn't part of the MBHP yet
+| 1N4148                | Diode            | 1        | 1N 4148            |                |
-  * Easy Testing and troubleshooting
+| 1N4002                | Diode            | 1        | 1N 4002            |                |
+| 7805                  | Voltage Regulator| 1        | uA 7805            |                |
-===== Result =====
+| LM317                 | Voltage Regulator| 1        | LM317-220          |                |
+| 4*47 kOhm             | Resistor Network | 2        | SIL 5-4 47K        |                |
-  * Dedicated PIC controller controls the motorfaders directly.
+| 1 kOhm                | Trimpot          | 1        | PT 6-L 1,0K        |                |
-  * Firmware can be updated via MIDI!
+| 100 Ohm               | Resistor         | 1        | 1/4W 100           |                |
-  * Motorfaders are accessed via MIDI - this allows standalone usage, cascading (to chain multiple modules), and the re-use of existing infrastructure such as MIOS, MIOS Studio and MIOS Bootloader
+| 220 Ohm               | Resistor         | 3        | 1/4W 220           |                |
-  * Can either be connected to a PC directly, or controlled from a second PIC or STM32 or LPC17
+| 240 Ohm               | Resistor         | 1        | 1/4W 240           |                |
-  * native support of various protocols (e.g. PitchBender, CCs, even Logic Control and Mackie Control Emulation)
+| 470 Ohm               | Resistor         | 2        | 1/4W 470           |                |
-  * support for 8 touch sensors
+| 1 kOhm                | Resistor         | 2        | 1/4W 1.0k          |                |
-  * instead of TC4427 I'm using L293D now - not at least because of the integrated diodes.
+| 4.7 kOhm              | Resistor         | 1        | 1/4W 4.7k          |                |
-  * due to the direct motor control connections, the PIC is now able to generate PWM with 50 uS steps for improved motor speed control while a motor is moved
+| 10 kOhm               | Resistor         | 2        | 1/4W 10k           |                |
-  * Dedicated Firmware  for this task, Enough memory free to integrate advanced features, such as runtime-calibration and motor position tracing
+| 10 uF                 | Capa Elec        | 2        | rad 10/35          |                |
+| 2200 uF               | Capa Elec        | 1        | rad 2.200/25       |                |
+| 100 nF                | Capa Ceram       | 6        | Z5U-2,5 100n       |                |
+| 33 pF                 | Capa Ceram       | 2        | Kerko 33p          |                |
+| Green Status LED      | LED              | 1        | LED 3MM ST GN      |                |
+| PIC Socket            | IC-Socket        | 1        | GS 40              |                |
+| L293D/74HC595 Socket  | IC-Socket        | 5        | GS 16              |                |
+| Optocoupler Socket    | IC-Socket        | 1        | GS 8               |                |
+| MIDI sockets          | MIDI Socket      | 2        | MABP 5S            |                |
 ===== Compatible Motorfaders =====
   * **ALPS RASON11M9** - [[http://ucapps.de/mbhp/MF_NG_connection_diagram.pdf|Interconnection Diagram]]