Differences

This shows you the differences between two versions of the page.

--- midibox_ay_3_8912_volume [2008/11/18 14:04] – lemonhorse
+++ midibox_ay_3_8912_volume [2008/11/26 15:10] (current) – lemonhorse
@@ Line 1: / Line 1: @@
 ===== MIDIBox AY 3 8912 - VOLUME MENU =====
+**MIDIBox AY 8912 Volume Respectively Amplitude Control:**
 *  Press **F4** (F3 + SHIFT) FOR THE **USER VOLUME** MENU
@@ Line 6: / Line 8: @@
 ::.
-^TONE^VALUE^VELOCITY^ENVELOPE MODE^
+^TONE^USER VALUE^CC7(A)/CC8(B)/CC9(C) MIDI VALUE^VELOCITY MODE^ENVELOPE MODE^
-| |priority 3|priority 2|priority 1|
+| |priority 4|priority 3|priority 2|priority 1|
-|VOLUME CH. A|0 to 15|ON/OFF|ON/OFF|
+|VOLUME CH. A|0 to 15|0 to 127 => coversation to 0-15|ON/OFF|ON/OFF|
-|VOLUME CH. B|0 to 15|ON/OFF|ON/OFF|
+|VOLUME CH. B|0 to 15|0 to 127 => coversation to 0-15|ON/OFF|ON/OFF|
-|VOLUME CH. C|0 to 15|ON/OFF|ON/OFF|
+|VOLUME CH. C|0 to 15|0 to 127 => coversation to 0-15|ON/OFF|ON/OFF|
 ::.
-=== ENVELOPE TO TONE ABC ON/OFF (ENVELOPE MODE ON) ===
+=== VOLUME TONE ABC - USER VALUE ===
-There will be a [ENV.ON] @ Tone A or B or C on the User **Volume Control Menu** instead of the volume value if the ENVELOPE MODE is activated.
+Just adjust the USER VOLUME VALUE here. You'll see no USER VOLUME VALUE if the [VELOCITY] or the [ENVELOPE] mode is activated.
+See => [F7] Velocity Menu: Toggle Velocity to Volume Tone A, B and C or Noise Period ON/OFF
+See => [F5] Envelope Control: Envelope Coarse, Env. Fine, Env. Shape, toggle Envelope Assignment to Tone A, B and C ON/OFF
+::.
+=== CONTROL CHANGE 7, 8 and 9 (MIDI CC EVENTS) ===
+The CONTROL CHANGE7 (VOLUME Tone A), CC8 (VOLUME Tone B) and CC9 (VOLUME Tone C) MIDI event overwrites the USER VOLUME VALUE (0-15) directly.
+But the CC Value will only apply if the VELOCITY and the ENVELOPE mode is off.
+See => MIDIBox AY 3 8912 CC LIST => [[MIDIBox_AY_3_8912_CC_LIST]]
+::.
+=== ENVELOPE TO TONE ABC ON/OFF (ENVELOPE MODE ON/OFF) ===
+There will be a [ENV.ON] @ Tone A or B or C on the User **Volume Control Menu** instead of the user volume value if the ENVELOPE MODE is activated.
 If the ENVELOPE MODE is in force the Volume Value will be overwritten.
 For more Information about the ENVELOPE MODE see => [[midibox_ay_3_8912_envelope| ENVELOPE (MENU)]]
+::.
-=== VELOCITY TO TONE ABC ON/OFF (VELOCITY MODE ON) ===
+=== VELOCITY TO TONE ABC ON/OFF (VELOCITY MODE ON/OFF) ===
 If the VELOCITY MODE is activated there will be a [VELOCITY] @ Tone A, B or C on the **User Volume Control Menu** instead of the volume value.
@@ Line 27: / Line 51: @@
 Note: if VELOCITY + ENVELOPE Mode is activated the ENVELOPE MODE is in effect.
+Press [F7] for the Velocity Menu (toggle Velocity to Volume Tone A, B and C or Noise Period)
+::.
 === MANUAL VOLUME CONTROL ===
@@ Line 32: / Line 59: @@
 See => [[midibox_ay_3_8912_mixer]]
+::.
--.-
-[18.11.2008]
+[26.11.2008]