Differences

This shows you the differences between two versions of the page.

--- pedal_box:manual [2009/12/15 05:43] – Durisian
+++ pedal_box:manual [2009/12/15 05:52] (current) – Durisian
@@ Line 82: / Line 82: @@
   * High Value
-a. Static? \\
+a. Static? aka 'FIX PED' \\
-Each pedal can be set to 1 (static) or 0 (change w/pc) \\
+Each pedal can be set to 1 (static) or 0 (change with rig control patch change) \\
-Not Fixed Pedals can change the bankstick, device and values they are set to by following Rig Control patch change events.
+Pedals will change the bankstick/device and values they are set to by following Rig Control patch change events when set to Static(aka FIX PED) is set to 0.
@@ Line 444: / Line 444: @@
 ^Function      ^PbX - TX  ^PbX - RX   ^PbD - TX  ^PbD RX  |
-|Channel       |1 - 16    |1 - 16     |1 - 16    |N       |
+|Channel       |1 - 16    |1 - 16     |1 - 16    |1 -16   |
 |Mode          |N         |N          |N         |N       |
-|Note          |Y         |Y          |N         |N       |
+|Note          |Y         |Y          |Y         |Y       |
 |Velocity      |N         |N          |N         |N       |
-|After Touch   |Y         |Y          |N         |N       |
+|After Touch   |Y         |Y          |Y         |Y       |
-|Pitch Bend    |N         |N          |N         |N       |
+|Pitch Bend    |Y         |Y          |Y         |Y       |
-|Control Change|Y         |Y          |Y         |N       |
+|Control Change|Y         |Y          |Y         |Y       |
-|Program Change|Y         |Y          |Y         |N       |
+|Program Change|Y         |Y          |Y         |Y       |
-Implementation is largly based on the Device Event List. Incoming events not listed will not be be responded too.
 The inbuilt MIDI merger if activated will forward all incoming events to the MIDI output (PbX and PbD)