Differences

This shows you the differences between two versions of the page.

--- soldering [2016/06/07 21:23] – psykhaze
+++ soldering [2016/06/07 21:27] (current) – [And Even More Tips] psykhaze
@@ Line 1: / Line 1: @@
-======= Soldering =======
+======== Soldering ========
-//FIXME Update This Page with Pictures and a Procedural way to do//
+{{ ::neonking:soldering.jpg?direct&500 |}}
+//FIXME Update this page with more pictures at least//
-====== Soldering well ======
+===== Soldering well =====
 A quote from [[http://www.elecraft.com/TechNotes/Ask_Dr_Solder.html|Ask Dr. Solder]] sums things up quite well:
@@ Line 28: / Line 30: @@
 \\
-====== Quotes from the forum: ======
+===== Quotes from the forum: =====
 //i have had a few peeling pads when doing these boards, it seems that the recoil from the pump hitting the hot pad/trace can strip it off sometimes... (it's certainly also bent some very thick wires) i'm going to get some desoldering braid instead//
@@ Line 38: / Line 40: @@
 \\
-====== Some More Tips ======
+===== Some More Tips =====
   * Make sure your board is //clean!//  A bare copper board has noticable oxidization within minutes.  Before soldering, consider lightly scrubbing your board with steel wool and a little solvent (isopropyl alcohol works well).  Even tinned/plated boards are filthy - you'd be surprised what you wipe off if you pour a little alcohol on it and rub it vigorously with a paper towel.
@@ Line 57: / Line 59: @@
 \\
-====== And Even More Tips ======
+==== And Even More Tips ====
 Black Light - The best and easiest way I've found for checking if there are any bad solders or shorts on my boards is to look at the boards under a black light (I'm using a screw in fluorescent bulb). The resin board comes out bright green and the solder, which I find a pain to see clearly sometimes, comes out dark purple. You can easily see any missed pins or anything else that may cause problems later on. -MOG151;)
@@ Line 65: / Line 67: @@
 \\
-====== Bad Soldering =======
+===== Bad Soldering ======
 see -> [[Bad Solderings Gallery]]
-====== Making a LCD Cable ======
+===== Making a LCD Cable =====
 Follow the guide in PDF here :