Differences

This shows you the differences between two versions of the page.

--- wcoref4_pcb [2018/08/20 21:27] – [Versions] latigid_on
+++ wcoref4_pcb [2018/12/18 09:36] (current) – [BOM v1.0] latigid_on
@@ Line 28: / Line 28: @@
 ===== BOM v1.0 =====
+**Please find the current BOM on [[http://midiphy.com]]. The table below is depreciated and will not be updated.**
 ^Type     ^Qty	^Value	   ^Package	^Parts^Mouser^Reichelt^Conrad^Other^Notes^
 ^Resistors^^^^^^^^^^
 |         |1    |330R 5%   |THT         |R102         |      |        |      |     | |
-|         |4    |1k   5%   |1206        |R7B1-4       |      |        |      |     | |
+|         |1    |560R 5%   |THT         |R33D        |      |        |      |     | |
+|         |3    |1k   5%   |1206        |R33A,B,C      |      |        |      |     | |
 |         |2    |1k   5%   |THT         |R11, R13     |      |        |      |     | |
 |         |2    |2k2 5%   |THT         |R7A, R8A     |      |        |      |     | |
@@ Line 68: / Line 71: @@
   * The [[wcore_usb|USB]] board is now combined with the wCore. It can be used as is or broken apart and the USB reconnected with wires, a 2.54mm header or a 10-pin Micro-MaTch connector.
   * Resistors R7B1-4 were renamed properly to R33A-D. R33**D** should have a different value (560~820R) than R33A/B/C (1k). Using longer cables on J15A/B and a smaller resistance for R33D could lead to displays not initialising properly.
+  * There is a circular silkscreen mark that aligns with the same mark on the Waveshare breakout.