MIDIbox

User Tools

Site Tools

Trace: • lre-oled-bar2 • flo • mbseq_panel_gb • transistor • smithy • mcan • tools • bandmaster • dipcoref4 • jack
wilba_mb_6582_control_surface_construction_guide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
wilba_mb_6582_control_surface_construction_guide [2020/12/12 18:08] – typo m00dawgwilba_mb_6582_control_surface_construction_guide [2020/12/15 15:13] (current) – Added link to JST cabling method m00dawg
Line 124: Line 124:
  
 **SOLDERING RIBBON CABLE BETWEEN BASE AND CS PCBS** **SOLDERING RIBBON CABLE BETWEEN BASE AND CS PCBS**
 +
 +**Note** There is a potentially better method mentioned on the forums ([[http://midibox.org/forums/topic/21498-connecting-mb-6582-pcbs-with-jst-xh/|here]]) which uses JST headers on the baseboard and either right-angled JST headers on the CS or just normal right-angled SIL headers. Coupled with ready-made JST cables, this is a much simpler approach and allows the two boards to be separated easily. It is worth a look before going down the path mentioned below.
  
 This is a slightly difficult process, so I'll give as much advice as possible. This is a slightly difficult process, so I'll give as much advice as possible.
wilba_mb_6582_control_surface_construction_guide.1607796491.txt.gz · Last modified: 2020/12/12 18:08 by m00dawg