MIDIbox

User Tools

Site Tools

Trace: • lre-oled-bar2 • flo • mbseq_panel_gb • transistor • smithy • mcan • tools • bandmaster • dipcoref4 • jack
wilba_mb_seq_parts_guide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wilba_mb_seq_parts_guide [2015/08/31 15:08] – added info on alternate tact switches altitudewilba_mb_seq_parts_guide [2018/03/07 21:59] (current) – goyousalukis
Line 1: Line 1:
 **WORK IN PROGRESS** **WORK IN PROGRESS**
 +===== Parts List =====
 +\\
 +This parts list corresponds to the PCB labeling on the Wilba Control Surface PCB sold by ModularAddict.com
  
 +^Name       ^Part                    ^Value  ^Quantity ^Reichelt Order Code ^Mouser^
 +|**Regular Parts**                                                      ||||||
 +|C1-C8     |Capacitor              |100nF   |8        |Z5U-2,5 100N        |594-A104K15X7RF5UAA  |
 +|D1-58     | Diode| 1N4148 |58 |1N 4148        |512-1N4148            |
 +|E1-17|Encoder+| |17 | |652-PEC16-4220FN0024|
 +|L1-16|Bicolor LEDs (red/green, 3mm round, diffused, common cathode)| |16| |859-LTL1BEKVJNN|
 +|L17-20, L31-34, L40-58 |LED green, 3mm round, diffused| |27| |859-LTL-4231|
 +| |Tempo LED|5mm|1| |604-WP483IDT|
 +|R1-R8A|1/4W Resistor |220 ohms (match to your LEDs)|10| |660-MF1/4DC2200F|
 +|RN1-12|6 Pin SIL resistor network|10k|12||264-10K-RC|
 +|SW1-58|Tactile Switches 12X7.3MM 160GF| |58| |TL1100F160Q|
 +| |Switch Caps Switch Cap Rectangle Black| |58| |611-PEBK|
 +|U1-U6|74HC165 shift register| |6| |595-SN74HC165N|
 +|U7-8|74HC595 shift register| |2| |595-SN74HC595N|
 +| | |16 pin IC Socket| | |575-199316|
 +|J1-2|10 pin IDC Socket++|10 pin|2| |571-5103309-1|
 +| |10 Pin IDC Header|10 pin|2| |710-61201023021|
  
 ++ see details about different encoder options below
 +
 +++ consider alternate sources like Amazon, AliExpress, eBay, ect.. for IDC headers/sockets. They are often sold in bags of 10.
  
 **REQUIRED AND WILL INCLUDE IN BULK ORDER** **REQUIRED AND WILL INCLUDE IN BULK ORDER**
Line 32: Line 55:
 Namely: TL-1240 [[http://www.mouser.com/ds/2/140/TL1240-346152.pdf]] and Mec 3F series [[http://www.mouser.com/ProductDetail/MEC-Switches/3FTH9/?qs=sGAEpiMZZMsqIr59i2oRcvYAxqB10yDKjM3xh7wCZYw%3d]] Namely: TL-1240 [[http://www.mouser.com/ds/2/140/TL1240-346152.pdf]] and Mec 3F series [[http://www.mouser.com/ProductDetail/MEC-Switches/3FTH9/?qs=sGAEpiMZZMsqIr59i2oRcvYAxqB10yDKjM3xh7wCZYw%3d]]
  
-The TL-1240 are short (8.2mm) so they cannot be used with encoders installed but are wired correctly for the LEDs+The TL-1240 are short (8.2mm) so they cannot be used with encoders installed but are wired correctly for the LEDs.
 The Mec parts are tall and have a variety of caps but the LEDs are NOT wired to anything despite having pads and will need to be wired by hand.  The 3 pin LEDs cannot be used with these switches.  Only the 3F Mec parts are suitable, the 5F and others may fit the footprint, but use a different scheme for the LEDs that wont work at all with this board The Mec parts are tall and have a variety of caps but the LEDs are NOT wired to anything despite having pads and will need to be wired by hand.  The 3 pin LEDs cannot be used with these switches.  Only the 3F Mec parts are suitable, the 5F and others may fit the footprint, but use a different scheme for the LEDs that wont work at all with this board
  
wilba_mb_seq_parts_guide.1441033703.txt.gz · Last modified: 2015/08/31 15:08 by altitude