MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== MIDIBox AY 3 8912 - Controllers ====

  * **CONTROLLER 01 - ENVELOPE SHAPE CONTROL:**
  * CC1 Value 000-015 dec. => ENVELOPE SHAPE down
  * CC1 Value 016-023 dec. => ENVELOPE SHAPE up down
  * CC1 Value 024-031 dec. => ENVELOPE SHAPE down continue
  * CC1 Value 032-039 dec. => ENVELOPE SHAPE down continue2
  * CC1 Value 040-047 dec. => ENVELOPE SHAPE down up
  * CC1 Value 048-055 dec. => ENVELOPE SHAPE up continue
  * CC1 Value 056-063 dec. => ENVELOPE SHAPE up
  * CC1 Value 064-127 dec. => ENVELOPE SHAPE up continue2
  * See ENVELOPE SHAPE => [[http://www.midibox.org/dokuwiki/midibox_ay_3_8912_envelope]]
  * **CONTROLLER 02 - GLOBAL ENVELOPE FINE** 0-127 (128-255 with +128 OFFSET CC3)
  * **CONTROLLER 03 - GLOBAL ENVELOPE FINE +128 OFFSET** (Value 0 => NO OFFSET, Value 1-128 => OFFSET +128)
  * **CONTROLLER 04 - GLOBAL ENVELOPE COARSE** 0-127 (128-255 with +128 OFFSET CC5)
  * **CONTROLLER 05 - GLOBAL ENVELOPE COARSE +128 OFFSET** (Value 0 => NO OFFSET, Value 1-128 => OFFSET +128)	      	
  * **CONTROLLER 06 - GLOBAL NOISE PERIOD** (Value 0-127 => 0-31 NIOSE PERIOD) 
  * **CONTROLLER 07 - VOLUME A** (Value 0-127 => 0-15 VOLUME)
  * **CONTROLLER 08 - VOLUME B** (Value 0-127 => 0-15 VOLUME)
  * **CONTROLLER 09 - VOLUME C** (Value 0-127 => 0-15 VOLUME)
  * **CONTROLLER 10** - Value 1-127 = Tone A ON / Value 0 = Tone A OFF
  * **CONTROLLER 11** - Value 1-127 = Tone B ON / Value 0 = Tone B OFF
  * **CONTROLLER 12** - Value 1-127 = Tone C ON / Value 0 = Tone C OFF
  * **CONTROLLER 13** - Value 1-127 = Noise A ON / Value 0 = Noise A OFF
  * **CONTROLLER 14** - Value 1-127 = Noise B ON / Value 0 = Noise B OFF
  * **CONTROLLER 15** - Value 1-127 = Noise C ON / Value 0 = Noise C OFF
  * **CONTROLLER 16** - Value "Envelope Mode" Tone A on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 17** - Value "Envelope Mode" Tone B on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 18** - Value "Envelope Mode" Tone C on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 19** - Value "Velocity Mode" Tone A on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 20** - Value "Velocity Mode" Tone B on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 21** - Value "Velocity Mode" Tone C on/off - Value 0 = OFF / Value 1-127 = ON
  * **CONTROLLER 22** - Value "Noise Period to Velocity" ON/OFF
  * Value 0 => "Velocity to Noise Period" = OFF
  * Value 1 => "Velocity to Noise Period" = ON [Take Velocity from MIDI Channel TONE A]
  * Value 2 => "Velocity to Noise Period" = ON [Take Velocity from MIDI Channel TONE B]
  * Value 3 => "Velocity to Noise Period" = ON [Take Velocity from MIDI Channel TONE C]
  * Value > 3 => NOT effective
  * Note: CC22 is effective on the MIDI Channel of Tone A or B or C


(20.06.2009)