MIDIbox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== TM5 Gate-Expansion ======
{{:phatline:TM5-Gate-Board-3D-Perspektive.jpg?700|}}\\
{{:phatline:TM5-Gate-Board-3D-Front.jpg?700|}}\\
{{:phatline:TM5-Gate-Board-3D-Back.jpg?700|}}\\

This are the Gate In/Out boards, 4 off them are needet to get 16x Gate-input/Trigger, and 16x Gate-Output \\

====== Shematic ======
{{:phatline:TM5-Gate-Board-Schema.jpg?950|}}\\

====== Building and BOM======
You need this PCB 4times\\

===== BOM =====
^qty		^reference		^value		^footprint		^MouserPartNr^
|	1	|	Gate1	|	Header-2x5-Micromatch	|	Header-2x5-Micromatch	|	571-1-2178710-0	|
|	8	|	J1-J8	|	3.5Jack for Gates	|	3-5JACK-CUI_SJ1-3535NG	|	490-SJ1-3535NG	|
|	8	|	R1-R8	|	1K	|	R-1K-0805-250mW	|	667-ERJ-P06J102V	|

ok this is a list for one PCB, for Triggermatrix you need that 4times!\\
so all following lists are already 4 times values!\\
copy following list into this [[https://www.mouser.com/tools/part-list-import.aspx|mouser.com-Link]]
<WRAP center round box 60%>
571-1-2178710-0|4\\
490-SJ1-3535NG|32\\
667-ERJ-P06J102V|32\\
</WRAP>
\\
**Order from Reichelt:**\\
6x[[https://www.reichelt.de/at/de/idc-stiftwanne-micro-match-10-polig-mpe-372-1-010-p120052.html?&trstct=pos_2&nbc=1|Micromatch-connector 10pin]]\\
\\
The 3x Montage Blocks H1,H2,H3 * 4 = 12 - is already includet in the [[triggermatrix5]] - BOM!\\

{{:phatline:TM5-Gate-Board-PCB.jpg?950|}}\\


====== To Do ======
waiting for Prototype PCB\\

====== Community users working on it ======
  * **[[Phatline]]** =  PCB & Shematic, UI-Programming, Documentation...\\

Just let a Private message on the forum to user already involved.\\
or join the forum: [[http://midibox.org/forums/topic/28777-triggermatrix-5/|Triggermatrix 5]]\\