Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 28 Hits
- basics =====
[[beginners_guide|{{title.gif}}]]
Before starting with the basics, it's useful to create a... s shorter than the others will restart four steps before the others, and on the next round, 8 steps before the others etc. For more on this topic, see sections 2.... imewise, the track lasts twice as many seconds as before, but what is gained in duration is lost in resolu
- frequently_asked_questions_faq: 9 Hits
- ox without having any knowledge about electronics before starting. However, if you have never learned to s... be supported by the host software, so check this before.
* **I posted a message in the Forum/I wrote ... components]]
* ** Which errors can I avoid? **
Before you order the components, check the prices of dif... ave to check the voltage pins with a multimeter **before** mounting the ICs. Furthermore a socket for the
- wilba_mb_6582_base_pcb_construction_guide: 9 Hits
- ====
**Please read the entire construction guide before buying parts or starting to solder anything.**
*... might not have soldered these kinds of components before, or know exactly what type of component to buy. S... o tinning wire (adding solder to the end of wire) before it is soldered to a terminal.
===== More advice... ad carefully any advice about specific components before you start soldering.**
For the base PCB, I recom
- protodeck: 8 Hits
-
As a lot of thing I build/create, I find a name before to begin anything.\\
A name is important. A nam... have helped me with midibox if I didn't do things before to ask him...\\
- [[http://noofny.blogspot.com/... glinton Array (we'll see that later)\\
as wrote before:\\
- in a column, all led of one considered col...
\\
\\
===== Firmwares=====
\\
As we saw before, there are 2 CORE inside the protodeck.\\
each
- home:software:windows:word2doku: 7 Hits
- Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l
- stryd_one_word2doku: 7 Hits
- Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l... Then
' Just process the chunk before any newline characters
' We'l
- wilba_mb_6582_control_surface_construction_guide: 5 Hits
- . Please wait until someone has tried this method before gluing to the panel. Watch this space!**
**THE ... afts go into the holes. It is best to do this bit before flipping the panel/PCB panel side down. Once they... boards to be separated easily. It is worth a look before going down the path mentioned below.
This is a s... 963-mb-6582-cs-cabling/|here]] for Wilba's advice before considering this alternative strategy.
More inte
- mbqg_fp: 5 Hits
- g to put through the holes first and measure them before you have the front panel manufactured.
It may be... same--just make sure each one is pushed in fully before soldering!
^ Description ^ Mouser P/N ^ Quanti... press down firmly with the iron on each leg just before applying the solder, in hopes that the leg will c... lutely sure** every single button is seated fully before soldering the remaining two pins. If the switch i
- aout_ng: 4 Hits
- possible but needs some external parts. As stated before, the MAX525 is quite expensive and hard to get, s... e VCF cutoff frequency will occur, so think twice before **not** using the (normal) TLV5630!
===== Connec... already soldered to the board, visual inspection before powering up is more important than on other modules! So double-check all solder joints again before proceeding. You can leave out the TL074s for a fi
- mididocs:seq:blm16x16_build_guide: 4 Hits
- s with his BLM (button LED matrix) 16x16+X. Never before had we seen such a mangle of duo LEDs, verowire a... nodes, while the cathodes share the same sinks as before. In total five SCALAR modules are present, one fo... d guide =====
==== General considerations: read before building ====
* The 289 through hole diodes a... uild. They should be trimmed as short as possible before soldering from the rear (i.e. the same side as th
- home:mbhp:module:aout_ng: 4 Hits
- possible but needs some external parts. As stated before, the MAX525 is quite expensive and hard to get, s... e VCF cutoff frequency will occur, so think twice before **not** using the (normal) TLV5630!
=== Connecto... already soldered to the board, visual inspection before powering up is more important than on other modules! So double-check all solder joints again before proceeding. You can leave out the TL074s for a fi
- how_to_create_custom_glcd_fonts_icons_bars_for_midibox_ng: 4 Hits
- required tools are available in a
similar way.
Before I begin I´d like to point out some **limitations*... update I recommend deleting all the changed files before the update and then getting all the new files aga... ibox_NG firmware should be compiled at least once before you start
to mess with the code. On the one hand... If you have compiled the firmware on your system before and
didn´t make any other changes than those pre
- fnp-sid: 4 Hits
- with this pcb) |
|J2 |1|12V power source (before the switch - careful, this header is always hot. ... o voltage regulators (Make sure you bend the legs before soldering and dont worry too much if the hole doe... e negative side. Again, it helps to bend the pins before soldering the capacitor)
14. Solder in your ext... g some parts, check they didn't fall on the floor before complaining to nILS.
7. If you are looking for J
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 4 Hits
- this function - you're done already.
\\
\\
=== Before the mod: ===
<code asm>DIN_ENTRY_EOT MACRO
dw ... where you wired your two status LEDs
\\
\\
=== Before the mod: ===
<code asm>DOUT_ENTRY_EOT MACRO
dw ... nc''
* Find ''CS_MENU_BUTTON_SID_LR''
* Right before this line insert:
<code asm>;; -----------------... TAT_DISPLAY_UPDATE_REQ
return</code>
\\
\\
=== Before the mod: ===
<code asm> bsf CS_STAT, CS_STAT_DIS
- wilba_mb_seq_construction_guide: 4 Hits
- john_e._finster: 4 Hits
- howto_create_a_pcb_english_german: 3 Hits
- wilba_mb_6582_control_surface_parts_list: 3 Hits
- home:skills:etching_pcbs: 3 Hits
- pga:preconfigsoftware: 3 Hits
- seq_v4l_mk._ii: 3 Hits
- windows_mios32_toolchain_core: 3 Hits
- electronics_basics: 3 Hits
- home:skills:troubleshooting:hardware: 3 Hits
- troubleshooting: 3 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 3 Hits
- wiki:syntax: 3 Hits
- mcan: 3 Hits
- wilba_mb_6582_psuopte: 3 Hits
- wilba_mb_6582_parts_list: 3 Hits
- pga:buildchanbrd: 3 Hits
- mios_faq: 3 Hits
- wilba_mb_6582: 3 Hits
- home:project:midi_mapper: 2 Hits
- layout_improvements: 2 Hits
- midibox_audiomatrix: 2 Hits
- forum_netiquette: 2 Hits
- c_from_first_principles: 2 Hits
- home:project:mb808: 2 Hits
- nils_bulk_terms: 2 Hits
- checksum: 2 Hits
- midiboxmixermanual: 2 Hits
- midibox_sid_faq: 2 Hits
- midiboxmixerhardware: 2 Hits
- mb_matrix: 2 Hits
- how_to_select_a_pic_id_header: 2 Hits
- windows_toolchain_core: 2 Hits
- albs_waldorf_knob_bulk_order: 2 Hits
- home:project:midi_router: 2 Hits
- midiboxmixersoftware: 2 Hits
- pga:buildregbrd: 2 Hits
- questionable: 2 Hits
- changing_din_pins: 2 Hits
- elo: 2 Hits
- mb_2069: 2 Hits
- seqv4plus_le_mec: 2 Hits
- tos_-_a_tds_controller_blog: 2 Hits
- ssm2044_pcb: 2 Hits
- encoders: 1 Hits
- albs_waldorf_knobs_2011_bulk_order: 1 Hits
- mb808: 1 Hits
- wcore_i2c: 1 Hits
- eclipse: 1 Hits
- wcore_midi8: 1 Hits
- macos_mios32_toolchain_core: 1 Hits
- waldorf_knobs_bulk_order_fall_2013: 1 Hits
- waldorf_knobs_bulk_order_spring_2014: 1 Hits
- wcore_res-sd: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- lucem: 1 Hits
- wcoref4_pcb: 1 Hits
- waldorf_knobs_bulk_order_2013: 1 Hits
- home:about:midibox: 1 Hits
- pic18f4685_8bit_lcd_driver: 1 Hits
- midibox_speakjet_k64_modul: 1 Hits
- fadercore_-_vlr-8enc: 1 Hits
- seqv4plus_jog: 1 Hits
- pga:choices: 1 Hits
- pga:smtsoldering: 1 Hits
- ssm2164_pcb: 1 Hits
- dseq32_matrix: 1 Hits
- midibox_ay_patch_menu: 1 Hits
- aout_4: 1 Hits
- gm5x5x5_noob_guide: 1 Hits
- home:mbhp:reichelt_shopping_cart: 1 Hits
- wilba_mb_6582_panels: 1 Hits
- cv1: 1 Hits
- triggermatrix5: 1 Hits
- midiboxmixer: 1 Hits
- tpd_pcb: 1 Hits
- midibox_live: 1 Hits
- wilba_mb_seq: 1 Hits
- midiboxdmx: 1 Hits
- midi_specification: 1 Hits
- midi_interface_blacklist: 1 Hits
- sammichsid: 1 Hits
- loopa-eurorack-panel: 1 Hits
- midibox_uc: 1 Hits
- msq-cc-lre: 1 Hits
- application_development: 1 Hits
- pga:postconfigsoftware: 1 Hits
- mios_c_simulator_-_debugger: 1 Hits
- envelope-follower-bissel-based: 1 Hits
- wilba_mb_6582_prototype: 1 Hits
- mnmlcore: 1 Hits
- windows_toolchain_codeblocks: 1 Hits
- mb-sidr8tr:start: 1 Hits
- mb_sync24: 1 Hits
- midibox_tia: 1 Hits
- mb-lre8x2cs_pcb_bulk_order: 1 Hits
- windows_toolchain_svn: 1 Hits
- mb-lre8x2cs_rev4.6: 1 Hits
- home:mbhp:module:core: 1 Hits
- home:skills:soldering: 1 Hits
- wickedblade: 1 Hits
- msq-cc-bcr: 1 Hits
- usb_gm5_module: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- wilba_midibox_rc: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- waldorf_knobs_bulk_order_april_2013: 1 Hits
- durisian: 1 Hits
- ucoregb: 1 Hits
- dougs_solder_price_survey: 1 Hits
- frailn_ay-3-8912_mini_sale: 1 Hits
- latency: 1 Hits
- linux_midi: 1 Hits
- monostable: 1 Hits
- non-disclosure_agreement_or_nda: 1 Hits
- stryd_one_codeblocks: 1 Hits
- x10: 1 Hits
- mb-sidr8tr:mb-mtrx_bulk: 1 Hits
- xon_xoff: 1 Hits
- zero_wait_state: 1 Hits
- mb-lre8x2cs_pcb: 1 Hits
- home:project:midibox_seqv3: 1 Hits
- northernlightx: 1 Hits
- midibox_vgmplayer: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- howto:dev:libcan: 1 Hits
- how_to_organize_a_bulk_order: 1 Hits
- introduction_to_midi: 1 Hits
- soldering: 1 Hits
- start: 1 Hits
- wikify:template:project: 1 Hits
- shortcut_trigger_for_enttec_light_factory: 1 Hits
- enc_4_4: 1 Hits
- stryd_one_mbhp: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- pga:compile: 1 Hits
- midibox_quad_genesis: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- waldorf_knobs_bulk_order_2012: 1 Hits
- gm5x5x5: 1 Hits
- syntax: 1 Hits
- home:mbhp:parts:mbhp_suppliers: 1 Hits
- home:project:midimon: 1 Hits
- mididocs:midibox_seq_v4: 1 Hits
- mb909: 1 Hits
- home: 1 Hits
- peake: 1 Hits
- home:project:midibox_fm: 1 Hits
- etching_pcb: 1 Hits
- pcb: 1 Hits
- mtbf: 1 Hits
- speakjet_control_overview: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- reichelt_shopping_cart: 1 Hits
- pga:midichart: 1 Hits
- stuartm_stukontrol: 1 Hits
- home:home: 1 Hits
- albs_waldorf_knob_-_order_no._3: 1 Hits
- pga:configmixer: 1 Hits
- msq-cc-lre-v2: 1 Hits
- changing_dout_pins: 1 Hits
- waldorf_knobs_bulk_order_2015_2016: 1 Hits