Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 39 Hits
-
• Port is Def.
Only the MIDI channel setting is different, each track having its own MIDI channel (1-16) on... /session//. One session can have a maximum of 256 different patterns (64 per bank) and 64 different songs (i.e. different sequences of the patterns in the session).
>>>//It makes sense to organise your group
- wilba_mb_6582_control_surface_parts_list: 10 Hits
- ndex.html]]. The PCB dimensions might be slightly different with other manufacturers, and the bezel dimension... re in a 16x8 LED matrix, it is not advised to use different colours of LEDs that are powered by the same DOUT... ough the same resistor) as the brightness will be different. See {{mb-6582:mb-6582_cs_dout_wiring.pdf}} for L... red and green with identical mcd value would have different brightness because they would receive different c
- wiki:syntax: 6 Hits
- Links to [[syntax|existing pages]] are shown in a different style from [[nonexisting]] ones.
* DokuWiki doe... For Mozilla and Firefox it can be enabled through different workaround mentioned in the [[http://kb.mozillazi... .
===== Sectioning =====
You can use up to five different levels of headlines to structure your content. If... mitigate the problem, you can upload your file in different formats for maximum browser compatibility.
For e
- wilba_mb_6582_base_pcb_construction_guide: 6 Hits
- elp.
====== PSU Options ======
There are three different ways of supplying power to the base PCB:
* **PS... to use the PCB mounted sockets and switch with a different case), then you will need to solder the PCB mount... hing wrong with this technique, and it's not much different to tinning wire (adding solder to the end of wire... ey are therefore much harder to tack, so choose a different joint to tack (i.e. choose the pad which has a ri
- triggermatrix: 6 Hits
- There are Songs (ProgramChange), each Song has 16 different Trigger-Routings Presets> these are the Song-Part... atrix\\
* Full Velocity control, visible with 3 different colours, each colour-Vel is set with its own CC\\...
* Free programmable Swing to each Step, with 2 different swing Length-sets, which are controlled live via ... There are Songs (ProgramChange), each Song has 8 different Trigger-Routings Presets> these are the Song-Part
- midibox_sid_faq: 5 Hits
- WT). You can define up to 32 table entries for 3 different CC parameters which are played with every note. M... of waves and pitches for percussive sounds.
Four different directives can be selected for each entry: "-" (d... nal parameter handling relies on CC parameters. A different implementation would consume much more memory (wh... nt to switch between 6581 and 8580 because of the different filter characteristics.
But for really interestin
- introduction_to_ucapps.de: 5 Hits
- (mainly Synths). Throughout the site, you´ll find different devices for certain applications. As I assume yo... cool sounding ways!
* you can MORPH (!) between different patterns without hard breaks
* it is a very fun... with this! You will have to know about grounding, different voltages, measure where to bring the problems to ... is commonly used) More:[[LCDs]]
And now for the different applications: There is **always** an exact number
- frequently_asked_questions_faq: 5 Hits
- ore you order the components, check the prices of different distributors. Mail order companies with a large v... ID? **
In common MIOS applications there are two different IDs: the MIOS ID which addresses the core for cod... within any menu), you could send some pings with different device IDs to the box - once the application retu... e, which allows you to use the MIDI IO ports with different applications (e.g. Cubase, MIOS Studio and JSynth
- ssm2044_pcb: 5 Hits
- T3).
==== Filter Caps ====
It's possible to use different types of filter capacitors - above I listed the w... citors and to my ears, the sound wasn't extremely different or worse with them. There are some subtle differe... 0nF value.
Another hint: I found out that **with different capacitor types, the resonance response of the SS... in way too early), you can compensate by using a different value for R22 and R23. E.g. with the ceramic caps
- seq_v4l_mk._ii: 5 Hits
- 6*4 with one row of switches left out. Normally a different colour LED will be used to indicate steps. A J8/9... == Note for switches ====
The board supports two different type of switch: [[https://www.reichelt.com/Switch... nts/D6R90-F1-LFS/|Mouser]].
For D6 switches many different colours and even square shapes are possible. Ensu... * 48* switches. See part notes above. You can use different colours to help identify the different functions.
- pedal_box:manual: 5 Hits
- hange, on/off or tap events.
* Pedals can have different settings for each program change, or can be fixed... n of being set to a fixed midi event, or can have different setting for each program change (event, min and m... hange, on/off or tap events.
* Pedals can have different settings for each program change, or can be fixed... Pedal Board, your device may calculate a slightly different BPM</sup>
====Relays====
New in version 2 - Up
- mididocs:seq:usingblm: 5 Hits
- e than one octave of notes). It has a variety of different functions, depending on which view you are in.
T... e Layer}}
But you'll notice that if you select a different Parameter Layer using the buttons on your SEQ Fro... and off by pressing the BLM buttons.
To select a different trigger layer with the BLM, press ALT+the track select buttons. OR, select a different triggger layer using the frontpanel buttons on yo
- pedal_box: 5 Hits
- tween pre-defined min and max values (can also be different for each program change)
* A MIDI CC can be c... Editor files allows easy...ish customization for different MIDI devices.
* Settings configurable from box... progarmming platform
* Separate download for different PIC types
* Added option to enable midi input... ces, check the pin assignment, some devices use a different setup. \\
With different setups, there is no way
- midibox_quad_genesis: 4 Hits
- t this design to your needs or build a completely different power supply, though I wouldn't recommend trying ... e paradigms. Both may be active simultaneously on different voices.
The first is the case in which the user ... d then set up so their commands will be played on different voices based on a dynamic-assignment polyphony en... ly, move, duplicate, or copy-and-paste the individual commands or the marked section to a different position.
- home:about:midibox: 4 Hits
- wilba_mb_6582_panels: 4 Hits
- syntax: 4 Hits
- northernlightx: 4 Hits
- mcan: 4 Hits
- mbqg_fp: 4 Hits
- home:mbhp:module:core: 4 Hits
- seqv4plus_le_mec: 4 Hits
- midibox_tia: 4 Hits
- home:project:midibox_sid:tb303_mode: 3 Hits
- what_is_a_midibox: 3 Hits
- stuartm_stukontrol: 3 Hits
- protodeck: 3 Hits
- tpd_pcb: 3 Hits
- dcb: 3 Hits
- electronics_basics: 3 Hits
- ucdocabstract: 3 Hits
- pga:choices: 3 Hits
- midibox_speakjet_k64_modul: 3 Hits
- home:project:mb808: 3 Hits
- wilba_mb_6582_psuopte: 3 Hits
- home:project:midibox_sid_tb303_mode: 3 Hits
- wilba_mb_6582: 3 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 3 Hits
- mb-lre8x2cs_pcb_bulk_order: 3 Hits
- dictionary:buffer: 3 Hits
- midibox_sid_tb303_mode: 3 Hits
- mb808: 3 Hits
- triggermatrix4: 3 Hits
- eclipse: 3 Hits
- home:mbhp:module:lcd: 3 Hits
- selfservice: 2 Hits
- forum_highlights_huis: 2 Hits
- best_user_patches_librairy: 2 Hits
- machine_language: 2 Hits
- speakjet_application_software_v_0.1: 2 Hits
- parallel: 2 Hits
- midibox: 2 Hits
- series: 2 Hits
- default_encoder_assignments: 2 Hits
- home:mbhp:parts: 2 Hits
- user_contest2007: 2 Hits
- home:mbhp:module:din: 2 Hits
- pga:postconfigsoftware: 2 Hits
- wickedblade: 2 Hits
- lucem: 2 Hits
- windows_toolchain_core: 2 Hits
- questionable: 2 Hits
- pga:inputchoices: 2 Hits
- sync_4_newbies: 2 Hits
- layout_improvements: 2 Hits
- wilba_mb_seq_pcb_bulk_order: 2 Hits
- mios: 2 Hits
- midi_specification: 2 Hits
- midibox_snes_apu: 2 Hits
- midibox_cv_v1: 2 Hits
- din: 2 Hits
- encoders: 2 Hits
- midibox_speakjet: 2 Hits
- mb_visual_metronome: 2 Hits
- mb-lre8x2cs_pcb: 2 Hits
- mb_olre16: 2 Hits
- where_to_order_components: 2 Hits
- msq-cc-bcr: 2 Hits
- wilba_mb_seq_parts_guide: 2 Hits
- ain_board_parts_list: 2 Hits
- arkade: 2 Hits
- scs_pcb: 2 Hits
- msq-cc-lre: 2 Hits
- aout_ng: 2 Hits
- diode: 2 Hits
- mbhp_genesis: 2 Hits
- msq-cc-lre-v2: 2 Hits
- wcoref4_pcb: 2 Hits
- fadercore_-_vlr-8x16ledmeter: 1 Hits
- aout_4: 1 Hits
- clockbox: 1 Hits
- mb_2069: 1 Hits
- home:skills:soldering: 1 Hits
- home:project:midibox_sid_v1_manual: 1 Hits
- wcore: 1 Hits
- macos_mios32_toolchain_core: 1 Hits
- trsequencer: 1 Hits
- pedal_box:pc_editor_manual: 1 Hits
- gm5x5x5: 1 Hits
- dictionary:antenna: 1 Hits
- circuit_designs: 1 Hits
- dictionary:boolean: 1 Hits
- mios_pic18f4620: 1 Hits
- home: 1 Hits
- pic18f4685_8bit_lcd_driver: 1 Hits
- wilba_mb_seq_construction_guide: 1 Hits
- dictionary:baud: 1 Hits
- ssm2164_getting_started: 1 Hits
- korg_wavedrum_midification: 1 Hits
- midiboxdmx: 1 Hits
- 16x4blm_pcb: 1 Hits
- wilba: 1 Hits
- cubase: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- mb_matrix: 1 Hits
- installing_gputils_and_sdcc_on_debian_linux: 1 Hits
- midibox_uc: 1 Hits
- mc_protocol_mappings: 1 Hits
- dipcoref4: 1 Hits
- wcore_usb: 1 Hits
- mb-lre8x2cs_rev4.6: 1 Hits
- wilba_mb_6582_prototype: 1 Hits
- fadercore_-_vlr-motorfader: 1 Hits
- wilba_mb_6582_parts_list: 1 Hits
- eusart_bug: 1 Hits
- windows_toolchain_codeblocks: 1 Hits
- mb_sync24: 1 Hits
- pga:buildchanbrd: 1 Hits
- dictionary:base: 1 Hits
- windows_toolchain_svn: 1 Hits
- bipolar_12v_psu: 1 Hits
- midibox_lc: 1 Hits
- led: 1 Hits
- aout_lc_module: 1 Hits
- ocr: 1 Hits
- mblight_mind-machine: 1 Hits
- dictionary:bootstrap: 1 Hits
- bosone: 1 Hits
- chip: 1 Hits
- installing_gputils_and_sdcc_on_osx: 1 Hits
- dougs_solder_price_survey: 1 Hits
- how_to_use_aout_seq_v2: 1 Hits
- irda: 1 Hits
- junction: 1 Hits
- martinsomerville: 1 Hits
- drumstuff: 1 Hits
- cross_assembler: 1 Hits
- pcmcia: 1 Hits
- rs-232: 1 Hits
- start: 1 Hits
- temp_template_test: 1 Hits
- transponder: 1 Hits
- usb: 1 Hits
- soldering: 1 Hits
- home:mbhp:module:aout_ng: 1 Hits
- mididocs:seq:blm16x16_x: 1 Hits
- mididoc:midibox_kb: 1 Hits
- midibox_fm_21: 1 Hits
- speakjet_breadboard_construction: 1 Hits
- howto:dev:autotools-skeleton: 1 Hits
- core_module: 1 Hits
- audiocommander: 1 Hits
- stm32f4_module: 1 Hits
- lcd: 1 Hits
- howto:dev:libcan: 1 Hits
- control_surface_troubleshooting: 1 Hits
- fadercore_-_vlr-case: 1 Hits
- chaos_matrix: 1 Hits
- seq_c64_keyboard_mod: 1 Hits
- home:mbhp:pic:18f4620: 1 Hits
- home:skills:troubleshooting: 1 Hits
- home:project:midibox_sid:v1_manual: 1 Hits
- arumblack: 1 Hits
- parts_faq: 1 Hits
- ilmenator: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- troubleshooting: 1 Hits
- midibox_sid_v1_manual: 1 Hits
- goblinz: 1 Hits
- home:software:picasm: 1 Hits
- button_overlay: 1 Hits
- pga:configmixer: 1 Hits
- best_documentation_effort_and_howto_for_total_newbies: 1 Hits
- home:mbhp:pic:eusart_bug: 1 Hits
- mididocs:v4l:midiprocessing: 1 Hits
- midiboxmixer: 1 Hits