User Tools

Site Tools


dipboardf4

This is an old revision of the document!


dipBoardF4

MIDIbox Hardware Platform extension for dipCoreF4.

Features

  • Very small size 65x46mm(less than your credit card).
  • Very low profile.
  • Your application board can be stacked on bottom with 'Micro-match' connectors.
  • The dipCoreF4 can be installed on the two side.
  • Provides all the most important features and ports as a regular mbhp.
  • Compatible with latigid on's USB and RES-SD modules.


Dimension


PCB


2 layers PCB design.
Fits 2 layer mostly common design rules.

  • min. drill 10mil
  • min. width 6mil



Top copper
Bottom


BOM

version 1. Mouser BOM:

Type Qty Value Package PartsMouserReicheltConradOtherNotes
Resistors
1 100R 5% 0603 R3
4 680R 5% 0603 R1, R2, R8, R9 Depends on Leds
4 10K 5% 0603 R4, R5, R6, R7
1 100K 5% 0603 R11
PTC fuses, resettable thermistors
1 1206L150THWR1206L1576-1206L150THWR
Capacitors
2 20p 0603C12, C13
9 100n 0603C2, C5, C6, C7, C8, C9, C14, C15, C16
3 2,2u 0603C4, C10, C11
1 10u SMC_AC3
1 47u SMC_BC1
Crystal
1 8MHz 3.2×2.5_KX-7Q1 oups! Not easy to find :( will be changed…
LEDs
4 0805 5V, 3V3, L1, L2
ICs
1 STM32F405RGLQFP64IC1 511-STM32F405RGT6
1 74HCT541TSSOP20 IC2 771-74HCT541PW-T
1 LD117AS33TRSOT223 REG
Switches
2 Micro SwitchesKMR2 4.6×2.8 RESET, USER 611-KMR221NGLFS SMT Tact Switches
Headers
3 1*20 male 649-68000-420HL Termination Post Length max 2.57mm
Connnector
1 mini-USB THT USB 571-1734510-1 for other ref take care about restricted area!

Ports and features.

toDo


Compatible/stack-able boards options

  • M16 Interface, stack-able, to connect on a SPI port, provides 16 MIDI IO and 48 GPIO 8-)

toDo

dipboardf4.1538595577.txt.gz · Last modified: 2018/10/03 19:39 by antichambre