This is an old revision of the document!

dipCore32

A reduced Core for your MIDIbox App, an STM32F405RG on a DIP40 board size.

Features

MIOS32 uses same processor family and drivers(no deep change).
Same internal hardware as Disco or wCore (speed, memory, peripherals, etc…) .
Board pinout and package compatible with a MIOS8 PIC
USB connector onboard.
5V power input and led.
3.3V regulator and led on board.
74HCT541 on board for the 5V output ports.
User and Reset buttons.
2 user leds.
8 extra pins for USB, buttons and leds.
Your favorite Core is now a component, it can be place on top or bottom(if you don't need onboard USB).

All commons MIOS32 ports are available except:

General purpose J10x ports were removed.
LCD port was reduced to a serial one, no more pins J15.D0-D7
2 UART only(2 MIDI In/2Out).
2 AIN channels only(e.g. pedal inputs)

PCB

toDo

Pinout

full chart: toDo
—- ===== STM32F407VG vs 405RG ===== === Legacy STM32F407 and 405 share the same characteristics. ===

The 405RG is a TQFP64, a 10x10mm package and only 64 pins.

No Ethernet MAC and camera interface.

ST STM32F4xx series

=== In MIOS32 === We use the same peripheral drivers same family, some compilation defined conditions were added for the specific pinout and type, number of ports. toDo

Table of Contents

dipCore32

Features

PCB

Pinout