MIDIbox

User Tools

Site Tools

Trace:
fadercore_-_vlr-3x8but

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
fadercore_-_vlr-3x8but [2014/07/27 22:01]
novski 		fadercore_-_vlr-3x8but [2014/07/27 22:10]
novski
Line 35: Line 35:
   * 2x10pin Header, 517-30310-6002 ​                                                                                                                 ​   * 2x10pin Header, 517-30310-6002 ​                                                                                                                 ​
   * 5x100nF,​594-K104K15X7RF53K2 ​   * 5x100nF,​594-K104K15X7RF53K2 ​
-  * 2x10k, 774-77061103P ​        +  * 2x10k Network, 774-77061103P ​        
-  * 3x220R, 652-4816P-T1LF-220 ​                                                                                        +  * 3x220R ​Array, 652-4816P-T1LF-220 ​                                                                                        
   * 1x74HC165D, 771-HC165D652   * 1x74HC165D, 771-HC165D652
   * 4x74HC595D, 771-74HC595D ​                                                   * 4x74HC595D, 771-74HC595D ​                                                
   * 24xLED RGB, 604-WP154A4SUREQBFZW   * 24xLED RGB, 604-WP154A4SUREQBFZW
 +  * 24x1N4148, 512-1N4148TR
  
-Project Order Basket on Mouser: [[]]+Project Order Basket on Mouser: [[http://​www.mouser.com/​ProjectManager/​ProjectDetail.aspx?​AccessID=1f42b04e6d]]
  
-The PCB is available under: [[http://​vlrlab.com/​lang/​17-8enc.html]] +The PCB is available under: [[]]
- +
-  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** +
-The Encoder on VLRlabs.com [[https://​www.vlrlab.com/​encoder/​13-bourns-rgb-led-encoder.html]]+
  
  
Line 55: Line 53:
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
-Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,12,13. +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. 
-Then go on with the Topside and the LEDs before soldering the Encoder as last.+Then go on with the Topside and the LEDs.
 Check the Connections with a Lens. Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
-Connect the core on J8/9 to J1 of the VLR-8Enc board.+Connect the core on J8/9 to J1 of the VLR-3x8But ​board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
Line 86: Line 84:
 LCD "​%C"​\\ LCD "​%C"​\\
 \\ \\
-# Encoder configuration\\+LCD "​@(1:​1:​1)OLED1"​\\ 
 +LCD "​@(2:​1:​1)OLED2"​\\ 
 +LCD "​@(3:​1:​1)OLED3"​\\ 
 +LCD "​@(4:​1:​1)OLED4"​\\ 
 +LCD "​@(5:​1:​1)OLED5"​\\ 
 +LCD "​@(6:​1:​1)OLED6"​\\ 
 +LCD "​@(7:​1:​1)OLED7"​\\ 
 +LCD "​@(8:​1:​1)OLED8"​\\
 \\ \\
-ENC n=  1   sr=1 pins=0:​1 ​  ​type=detented2\\ +# In this demo we configure individual brightness levels for the LEDs from EVENT_BUTTON events\\
-ENC n=  2   sr=1 pins=2:​3 ​  ​type=detented2\\ +
-ENC n=  3   sr=1 pins=4:​5 ​  ​type=detented2\\ +
-ENC n=  4   sr=1 pins=6:​7 ​  ​type=detented2\\ +
-ENC n=  5   sr=2 pins=0:​1 ​  ​type=detented2\\ +
-ENC n=  6   sr=2 pins=2:​3 ​  ​type=detented2\\ +
-ENC n=  7   sr=2 pins=4:​5 ​  ​type=detented2\\ +
-ENC n=  8   sr=2 pins=6:​7 ​  ​type=detented2\\+
 \\ \\
-# LEDring configuration\\ +LCD "@(1:10:1)RGB Demo #2"\\
-DOUT_MATRIX n= 1  ​rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\+
 \\ \\
-# Encoder events\\ +DIN_MATRIX ​ n=1  ​rows=4  sr_dout_sel1=1  ​sr_din1=1                     button_emu_id_offset=1001\\ 
-EVENT_ENC id= 1  fwd_id=LED_MATRIX:1   type=CC chn= 1 cc= 24  lcd_pos=1:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +DOUT_MATRIX n=1  ​rows=4  ​sr_dout_r1=2    sr_dout_g1=3 sr_dout_b1=4     led_emu_id_offset=1025\\
-EVENT_ENC id= 2  fwd_id=LED_MATRIX:​2 ​  ​type=CC chn= 1 cc= 25  lcd_pos=2:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 3  fwd_id=LED_MATRIX:​3 ​  ​type=CC chn= 1 cc= 26  lcd_pos=3:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 4  ​fwd_id=LED_MATRIX:​4 ​  type=CC chn= 1 cc= 27  lcd_pos=4:1:2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 5  fwd_id=LED_MATRIX:​5 ​  ​type=CC chn= 1 cc= 28  lcd_pos=5:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 6  fwd_id=LED_MATRIX:​6 ​  ​type=CC chn= 1 cc= 29  lcd_pos=6:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 7  fwd_id=LED_MATRIX:​7 ​  ​type=CC chn= 1 cc= 30  lcd_pos=7:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\ +
-EVENT_ENC id= 8  fwd_id=LED_MATRIX:​8 ​  ​type=CC chn= 1 cc= 31  lcd_pos=8:​1:​2 label="​^std_enc"​ LED_MATRIX_PATTERN=2\\+
 \\ \\
-# Encoder Buttons\\+# These button functions forward their value also to LEDs\\ 
 +# it's possible to set the rgb levels in the button event, it will be forwarded as well!\\
 \\ \\
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:8  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff ​lcd_pos=1:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1001  ​fwd_id=LED:1025  type=NoteOn key=36 ​chn=1  rgb=15:0:0 lcd_pos=1:​1:​2 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:16 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:​1:​4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1002  ​fwd_id=LED:1026  ​type=NoteOn key=37 ​chn=1  rgb=15:0:0 lcd_pos=2:1:2 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=117     ​hw_id=17 ​  fwd_id=LED:24 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:​1:​5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1003 ​ fwd_id=LED:​1027 ​ type=NoteOn key=38 chn=1  rgb=15:​0:​0 ​lcd_pos=3:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1004 ​ fwd_id=LED:​1028 ​ type=NoteOn key=39 chn=1  ​rgb=15:0:0 lcd_pos=4:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1005  ​fwd_id=LED:1029  ​type=NoteOn key=40 ​chn=1  rgb=15:0:0 lcd_pos=5:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1006 ​ fwd_id=LED:​1030 ​ type=NoteOn key=41 chn=1  rgb=15:0:0 lcd_pos=6:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1007 ​ fwd_id=LED:​1031 ​ type=NoteOn key=42 chn=1  rgb=15:​0:​0 ​lcd_pos=7:1:2 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1008 ​ fwd_id=LED:​1032 ​ type=NoteOn key=43 chn=1  ​rgb=15:0:0 lcd_pos=8:​1:​2 ​label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=118     ​hw_id=18 ​  fwd_id=LED:7  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1009  ​fwd_id=LED:1033  type=NoteOn key=52 ​chn=1  rgb=0:15:0 lcd_pos=1:1:3 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=118     ​hw_id=18 ​  fwd_id=LED:15 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1010 ​ fwd_id=LED:​1034 ​ type=NoteOn key=53 chn=1  rgb=0:​15:​0 ​lcd_pos=2:​1:​3 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=118     hw_id=18   fwd_id=LED:23 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1011  ​fwd_id=LED:1035  ​type=NoteOn key=54 ​chn=1  rgb=0:15:0 lcd_pos=3:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1012  fwd_id=LED:1036  type=NoteOn key=55 chn=1  rgb=0:15:0 lcd_pos=4:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1013  fwd_id=LED:​1037 ​ type=NoteOn key=56 chn=1  rgb=0:15:0 lcd_pos=5:​1:​3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1014  ​fwd_id=LED:1038  ​type=NoteOn key=57 ​chn=1  rgb=0:15:0 lcd_pos=6:​1:​3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1015 ​ fwd_id=LED:​1039 ​ type=NoteOn key=58 chn=1  rgb=0:15:0 lcd_pos=7:1:3 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1016 ​ fwd_id=LED:​1040 ​ type=NoteOn key=59 chn=1  rgb=0:​15:​0 ​lcd_pos=8:1:3 label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:6  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:​1:​3 label="​R^std_btn"​\\ +EVENT_BUTTON ​ id=1017  ​fwd_id=LED:1041  type=NoteOn key=68 ​chn=1  rgb=0:0:15 lcd_pos=1:​1:​4 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:14 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:4 label="​G^std_btn"​\\ +EVENT_BUTTON ​ id=1018 ​ fwd_id=LED:​1042 ​ type=NoteOn key=69 chn=1  rgb=0:0:15 lcd_pos=2:1:4 label="​^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=119     ​hw_id=19 ​  fwd_id=LED:22 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:5 label="​B^std_btn"​\\+EVENT_BUTTON ​ id=1019 ​ fwd_id=LED:​1043 ​ type=NoteOn key=70 chn=1  rgb=0:​0:​15 ​lcd_pos=3:​1:​4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1020  ​fwd_id=LED:1044  ​type=NoteOn key=71 ​chn=1  rgb=0:0:15 lcd_pos=4:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1021 ​ fwd_id=LED:​1045 ​ type=NoteOn key=72 chn=1  rgb=0:​0:​15 ​lcd_pos=5:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1022  ​fwd_id=LED:1046  ​type=NoteOn key=73 ​chn=1  rgb=0:0:15 lcd_pos=6:​1:​4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1023 ​ fwd_id=LED:​1047 ​ type=NoteOn key=74 chn=1  rgb=0:0:15 lcd_pos=7:1:4 label="​^std_btn"​\\ 
 +EVENT_BUTTON ​ id=1024 ​ fwd_id=LED:​1048 ​ type=NoteOn key=75 chn=1  rgb=0:​0:​15 ​lcd_pos=8:1:4 label="​^std_btn"​\\
 \\ \\
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​5 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​3 label="​R^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​13 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​4 label="​G^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=120 ​    ​hw_id=20 ​  ​fwd_id=LED:​21 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=4:​1:​5 label="​B^std_btn"​\\ 
-\\ 
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​4 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​3 label="​R^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​12 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​4 label="​G^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=121 ​    ​hw_id=21 ​  ​fwd_id=LED:​20 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=5:​1:​5 label="​B^std_btn"​\\ 
-\\ 
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​3 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​3 label="​R^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​11 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​4 label="​G^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=122 ​    ​hw_id=22 ​  ​fwd_id=LED:​19 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=6:​1:​5 label="​B^std_btn"​\\ 
-\\ 
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​2 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​3 label="​R^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​10 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​4 label="​G^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=123 ​    ​hw_id=23 ​  ​fwd_id=LED:​18 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=7:​1:​5 label="​B^std_btn"​\\ 
-\\ 
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​1 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​3 label="​R^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​9 ​ type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​4 label="​G^std_btn"​\\ 
-EVENT_BUTTON ​  ​id=124 ​    ​hw_id=24 ​  ​fwd_id=LED:​17 type=cc ​  ​chn=1 ​  ​cc=15 ​  ​range=0:​127 ​   button_mode=OnOff lcd_pos=8:​1:​5 label="​B^std_btn"​\\ 
-\\ 
-LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\ 
-LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\ 
-LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\ 
-LED_MATRIX_PATTERN n=2  pos=10 ​ pattern=0000011000000000\\ 
-LED_MATRIX_PATTERN n=2  pos=11 ​ pattern=0000011100000000\\ 
-LED_MATRIX_PATTERN n=2  pos=12 ​ pattern=0000011110000000\\ 
-LED_MATRIX_PATTERN n=2  pos=13 ​ pattern=0000011110000000\\ 
-LED_MATRIX_PATTERN n=2  pos=14 ​ pattern=0000011111000000\\ 
- 
 Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:​1:​5 {6=Display number : 1= X-axis : 5= Y-Axis (row)} Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:​1:​5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
fadercore_-_vlr-3x8but.txt · Last modified: 2014/07/28 07:31 by novski

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki